Palladium(II) cyanide

Palladium(II) cyanide
Names
IUPAC name
Palladium(2+) dicyanide
Identifiers
2035-66-7
3D model (Jmol) Interactive image
ChemSpider 67420
ECHA InfoCard 100.016.364
PubChem 6093464
Properties
Pd(CN)2
Molar mass 158.455 g/mol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Palladium(II) cyanides are chemical species with the empirical formula Pd(CN)n(2-n)−. The dicyanide (n = 2, CAS: [2035-66-7]) is a coordination polymer and was the first pure palladium compound isolated. In his attempts to produce pure platinum metal in 1804, W.H. Wollaston added mercuric cyanide to a solution of impure platinum metal in aqua regia. This precipitated palladium cyanide which was then ignited to recover palladium metal - a new element.

It had long been suspected that the structure of palladium cyanide consists of square planar Pd(II) centers[1] linked by bridging cyanide ligands, which are bonded through both the carbon and nitrogen atoms. The CN stretch in the infrared spectra of Pd(CN)2, at 2222 cm−1, is typical of bridging cyanide ions. It is now known that the compound commonly known as "Palladium(II) cyanide" is in fact a nanocrystaline material better described using the formula Pd(CN)2.0.29H2O. The interior of the sheets do indeed consist of square-planar palladium ions linked by head-to-tail disordered bridging cyanide groups to form 4,4-nets. These sheets are approximately 3 nm x 3 nm in size and are terminated by an equal number of water and cyanide groups maintaining the charge neutrality of the sheets. These sheets then stack with very little long range order resulting in Bragg diffraction patterns with very broad peaks. The Pd-C and Pd-N bond lengths, determined using total neutron diffraction, are both 1.98 Å.[2]

The compound is rather insoluble in water with a solubility product of log Ksp = -42.[3]

The slightly more topical palladium(II) cyanide is the dianion [Pd(CN)4]2−. The equilibrium constant for the competition reaction

PdL2+ + 4CN [Pd(CN)4]2− + L, L = 1,4,8,11-tetraazaundecane (2,3,2-tet)[4]

was found to have a value of log K = 14.5.[5] Combination with the formation of the palladium complex with the tetradentate ligand

[Pd(H2O)4]2+ + L PdL2+ + 4 H2O, log K = 47.9

gives

[Pd(H2O)4]2+ + 4CN [Pd(CN)4]2− + 4H2O, log β4 = 62.3.

This appears to be the highest formation constant known for any metal ion.[5]

The affinity of Pd for cyanide is so great that palladium metal is attacked by cyanide solutions:

Pd(s) + 2 H+ + 4 CN [Pd(CN)4]2− + H2

This reaction is reminiscent of the “cyanide process” for the extraction of gold, although in the latter reaction O2 is proposed to be involved, to give H2O.[3]

Exchange of between free cyanide ion and [Pd(CN)4]2− has been evaluated by 13C NMR spectroscopy. That exchange occurs at all illustrates the ability of some compounds to be labile (fast reactions) but also stable (high formation constants). The reaction rate is described as follows:

rate = k2[M(CN)42−][CN], where k2 120 M−1−s−1

The bimolecular kinetics implicate a so-called associative pathway. The associative mechanism of exchange entails rate-limiting attack of cyanide on [Pd(CN)4]2−, possibly with the intermediacy of a highly reactive pentacoordinate species [Pd(CN)5]3−. By comparison, the rate constant for [Ni(CN)4]2− is > 500,000 M−1−s−1, whereas [Pt(CN)4]2−exchanges more slowly at 26 M−1s−1. Such associative reactions are characterized by large negative entropies of activation, in this case: -178 and -143 kJ/(mol·K) for Pd and Pt, respectively.[6]

In organic synthesis palladium cyanide is used in the synthesis of olefinic cyanides from olefins.[7] and as a catalyst in the regioselective reaction between cyanotrimethylsilane and oxiranes .[8]

References

  1. R. B. Janes (1935). "The Diamagnetic Susceptibilities of Palladium Salts". J. Am. Chem. Soc. 57 (3): 471–473. doi:10.1021/ja01306a025.
  2. S. J. Hibble, A. M. Chippindale, E. J. Bilbe, E. Marelli, P. J. F. Harris and A. C. Hannon (2011). "Structures of Pd(CN)2 and Pt(CN)2: Intrinsically Nanocrystaline Materials". Inorg. Chem. 50: 104–113. doi:10.1021/ic101358q.
  3. 1 2 R. D. Hancock; A. Evers (1976). "Formation Constant of Pd(CN)42". Inorg. Chem. 15 (4): 995–6. doi:10.1021/ic50158a063.
  4. The tetramine 2,3,2-tet, H2N(CH2)2NH(CH2)3NH(CH2)2NH2, is similar to triethylenetetramine (2,2,2-tet) but has an additional methylene group between the two central nitrogen atoms
  5. 1 2 Harrington, James M.; Jones, S. Bart; Hancock, Robert D. (2005). "Determination of formation constants for complexes of very high stability: log β4 for the [Pd(CN)4]2− ion". Inorganica Chimica Acta. 358 (15): 4473–4480. doi:10.1016/j.ica.2005.06.081.
  6. J. J. Pesek; W. R. Mason (1983). "Cyanide Exchange Kinetics for Planar Tetracyanometalate Complexes by Carbon-13 NMR". Inorg. Chem. 22 (20): 2958–2959. doi:10.1021/ic00162a039.
  7. Y. Odaira; T. Oishi; T. Yukawa; S. Tsutsumi (1966). "The Synthesis of Olefinic Cyanides from Olefins by Means of Palladium(II) Cyanide". J. Am. Chem. Soc. 88 (17): 4105–4106. doi:10.1021/ja00969a047.
  8. K. Imi; N. Yanagihara; K. Utimoto (1987). "Reactions of Cyanotrimethylsilane with Oxiranes. Effects of Catalysts or Mediators on Regioselectivity and Ambident Character". J. Org. Chem. 52 (6): 1013–1016. doi:10.1021/jo00382a008.
This article is issued from Wikipedia - version of the 11/30/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.