Nesterov assault rifle

Nesterov Assault Rifle
Type Assault rifle
Place of origin  Soviet Union
Production history
Designer Azary Nesterov
Designed 1961–1970s
Variants See Variants
Specifications
Cartridge 7.62×39mm
Caliber 7.62mm
Action Gas-operated
Blow forward (LA 3)
Feed system 30-round detachable box magazine
Sights Iron sights

The Nesterov assault rifle (Russian:Автомат Нестерова) is an assault rifle of Soviet origin.[1][2]

Variants

LA-1

The LA 1 (ЛА-1) has a Bullpup configuration.

LA-2

The LA 2 (ЛА-2) is a Carbine. The sample was designed by Izhevsk Machine-Building Plant A. I. Nesterovym in 1961 under the influence of plant competition for the AKM. The sample frame limited progress in its rearmost position of the cutting insert receiver. This allowed the elasticity of its walls to reduce the impact of hitting the moving parts in an extreme position on the tip-off weapon. Automatic mode shows improved shooting accuracy. Location of the return spring on the left side of the bolt allowed its height to be reduced along with the height of the arms in general. Shoe flies combine with the gas chamber, with a diopter sight fully posted on the cover of the receiver. A cleaning gas vent at the top of the gas chamber in the firing position is covered by a crane. Weight is reduced to 2.15 kilograms (4.7 lb). Its prototype 1961 magazine capacity was 30 rounds with an effective range of 1,000 meters.

LA-3

The LA 3 (ЛА-3) is a Carbine. The LA 3 was designed by B.M. Zorinym in 1962. Its feature is automatic operation based on a blow forward design. The rifle stands out for its simplicity. The tests revealed an increased dispersion of the sample by firing bursts, due to the appearance of additional pulses when moving the barrel forward. The prototype 1962 magazine capacity was 30 rounds and offered an effective range of 1,000 meters.

LA-4

The LA 4 (ЛА-4) has a Bullpup firearm configuration. The sample was designed by A.I.Nesterov in 1964. The recoil energy is reduced by its long course. The return spring barrel and bolt are located concentrically. One guide rod inside and a spring barrel outside. All parts of the trigger are made by stamping from a sheet. Translator modes of fire and safety are made separately. The sight is placed in the handle. To improve ease of handling of weapons, the control lever is tilted to the right. The prototype's magazine capacity was 30 rounds with an effective range of 1,000 meters.

See also

References

This article is issued from Wikipedia - version of the 2/7/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.