NER Class H

NER Class H
LNER Class Y7

1310 at Barrow Hill, April 2012
Type and origin
Power type Steam
Designer T. W. Worsdell
Builder Gateshead Works (19)
Darlington Works (5)
Build date 1888–1923
Total produced 24
Specifications
Configuration 0-4-0T
UIC class B 2nt
Gauge 4 ft 8 12 in (1,435 mm)
Driver dia. 3 ft 6 14 in (1.073 m)
Wheelbase 6 ft 0 in (1.83 m)
Length 20 ft 4 in (6.20 m)
Width 7 ft 1 in (2.16 m)
Height 12 ft 0 in (3.66 m)
Axle load 13 long tons 0 cwt (29,100 lb or 13.2 t)
Loco weight 22 long tons 14 cwt (50,800 lb or 23.1 t) full
Fuel type Coal
Fuel capacity 6.25 long cwt (700 lb; 318 kg)
Water cap 500 imp gal (2,300 l; 600 US gal)
Firebox:
  Firegrate area
11.3 sq ft (1.05 m2)
Boiler LNER diagram 74
Boiler pressure 140 psi (0.97 MPa)
Heating surface:
  Tubes
448 sq ft (41.6 m2)
  Firebox 57 sq ft (5.3 m2)
Cylinders Two, inside
Cylinder size 14 in × 20 in (356 mm × 508 mm)
Performance figures
Tractive effort 11,040 lbf (49.11 kN)
Career
Operators NER » LNER » BR
Class NER: H
LNER: Y7
Power class 0F
Axle load class Route availability: 1
Retired 1929-1952
Preserved Two: 1310, 985

The North Eastern Railway (NER) Class H, classified as Class Y7 by the London and North Eastern Railway (LNER) is a class of 0-4-0T steam locomotives designed for shunting.

Description

68088 at Loughborough

Introduced in 1888 by Thomas W. Worsdell, six were built in 1888. Their simple, bare design easily navigated the tight curves and poor quality track which they ran on. The H proved so successful, that the NER ordered a further ten in 1891, three in 1897 and five more were ordered by the LNER in 1923.

Coal was carried in side bunkers incorporated into the side tanks. The absence of a rear bunker and the small size of the cab provided the driver with a clear view of the buffer bar when reversing onto a train. The H shared their simple domeless boiler design with the H1 (J78) and H2 (J79) classes.

The locos were originally fitted with dumb buffers, but these were changed for small round buffers during the 1930s,[1] some also gaining vacuum brakes during this period; only hand and steam brakes were fitted when built.

Locomotives operating at Tyne Dock were altered to take shunting poles on each corner of the loco, giving the ability to pull a wagon on an adjacent line.[2]

Numbering and livery

The LNER originally painted the Y7s in black with ¼inch vermillion lining; repaints after 1928 omitted this with locomotives in plain black.[1]

Two entered British Railways stock in 1948, becoming BR 68088 and 68089.

Operation and preservation

The original work of these locos was on Tyneside, at Hull docks, and within Darlington works,[2] but LNER no.8088 was recorded working at Stratford works between 1943 and 1952.[3]

Dock work was hit hard by the depression, and between 1929 and 1932 the sixteen locomotives which made up the first two batches delivered were withdrawn, nine being sold to industrial use while the remainder were scrapped.[2]

Two have survived to preservation:

References

  1. 1 2 Campling, Nick (July 1972). "Locomotives of the LNER: Ex NER Classes Y7 and Y8". Railway Modeller. Vol. 23 no. 261. Beer: Peco Publications & Publicity Ltd. pp. 219–220.
  2. 1 2 3 Marsden, Richard. "The T.W. Worsdell Y7 (NER Class H) 0-4-0 Shunters". The London & North Eastern Railway (LNER) Encyclopedia. Retrieved 2009-03-20.
  3. 1 2 "Y7 0-4-0T - 68088". Midland and Great Northern Joint Railway Society. Retrieved 2009-03-20.
  4. Baxter 1986, p. 165.
  5. "1310 North Eastern Railway 0-4-0T built 1891". Middleton Railway - Rolling Stock. Retrieved 2009-03-20.
  6. 1 2 Boddy et al. 1977, p. 98.

Sources

Wikimedia Commons has media related to NER Class H / LNER Class Y7.
This article is issued from Wikipedia - version of the 7/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.