N&W class M

N&W M class

N&W #450, the very first M, in its 1906 Baldwin portrait.
Type and origin
Power type Steam
Builder Baldwin Locomotive Works (50);
ALCO-Richmond (75)
Build date 1906
Total produced 125
Specifications
Configuration 4-8-0
Gauge 4 ft 8 12 in (1,435 mm)
Leading dia. 27 in (686 mm)
Driver dia. 56 in (1,422 mm)
Length 74 ft 11 34 in (22.85 m)
Height 15 ft 5 in (4.70 m)
Adhesive weight 160,000 lb (73 tonnes)
Loco weight 200,000 lb (90.7 tonnes)
Fuel type Coal
Fuel capacity 40,000 lb (18.1 tonnes)
Water cap 12,000 US gal (45,000 l; 10,000 imp gal)
Boiler pressure 200 lbf/in2 (1.38 MPa)
Heating surface 2,940 sq ft (273.1 m2)
Cylinders Two
Cylinder size 21 in × 30 in (533 mm × 762 mm)
Valve gear Stephenson (inside); Some later converted to Baker
Valve type 12-inch (300 mm) piston valves
Performance figures
Tractive effort 40,163 lbf (178.65 kN)
Career
Operators Norfolk & Western Railway
Class M
Numbers 375–499
Preserved 4
N&W M1 class
Type and origin
Only differences from class M above are shown
Power type Steam
Builder Baldwin (50),
ALCO-Richmond (50)
Build date 1907
Total produced 100
Specifications
Valve gear Walschaerts
Career
Operators Norfolk & Western Railway
Class M1
Numbers 1000–1099
Retired 1956, 1957
N&W M2 class

N&W #1138 in its Baldwin portrait.
Type and origin
Power type Steam
Builder Baldwin (50);
N&W Roanoke Shops (11)
Serial number Roanoke 182–192
Build date 1910
Total produced 61
Specifications
Configuration 4-8-0
Gauge 4 ft 8 12 in (1,435 mm)
Driver dia. 56 in (1.422 m)
Boiler pressure 200 psi (1.38 MPa)
Heating surface 4,041 sq ft (4,315 if superheater fitted)
Cylinders Two
Cylinder size 24×30 in (540×762 mm)
Valve gear Walschaerts (Baldwin built); Baker (Roanoke built)
Performance figures
Tractive effort 52,457 lbf (233.34 kN)
Career
Operators Norfolk & Western Railway
Class M2
Numbers 1100–1160

The Norfolk and Western Railway's M, M1 and M2 classes (also known as the "Mastodon-class") were a series of 4-8-0 steam locomotives owned and operated by the Norfolk and Western Railway. These were the last significant deliveries of 4-8-0s in the United States. The N&W needed to get coal shipments over a mountain range, and powerful locomotives were needed. 4-8-0s were chosen over 2-8-2s because the 4-8-0 had better adhesive weight. Thus, in 1906, the first of the most numerous American class of 4-8-0 was contracted and built by Baldwin. The M1 class only differed from the M in valve gear. Because the M1's valve gear was poorly designed, there was excessive wear, making it impossible to keep them in alignment and valves properly set. Unsurprisingly, the M1's were the first to be retired which led to the M2 class engines with a better designed valve gear with less excessive wear.

Experiments

When bigger locomotives came to the N&W, some of the M's were used as switchers. But there was a problem: in some cities, smoke amount laws were broken, so the N&W decided to do an experiment with #1100 and #1112, both M2 types. First: they were both added with shorted flues and added with combustion chambers. They were also both added with a draft fan, driven by a steam turbine. Stokers and water level controls were added so the locomotives could be left alone for a long time. This gave both locos the name "Automatic Switcher". Mechanical lubrication was added so it was easier to maintain the parts that are hard to lubricate. Both of the engines tenders were modified to haul 20 tons of coal and 11,000 gallons of water. There were mechanical issues with this experiment however, so it didn't last very long. The draft fan would be occasionally damaged, because of the cinders. Ashes would also shoot out of the stack, so the crew was vulnerable to get covered. #1112 was added also with more heating surface, increasing the boiler pressure to 225 pounds. A cinder collector was added in front of the exhaust fan to collect cinders and bring them back to the firebox. But this experiment was still a big bust. Sadly, both #1100 and #1112 were retired in 1951, nearly ten years before the N&W gave up steam power in 1960.

Survivors

Several locomotives survive. The most well known is No. 475, part of the 1906 order, which is currently operating on the Strasburg Rail Road in Pennsylvania. No. 433, also of the 1906 order, is an outdoors static exhibit in a park Abingdon, Virginia, with a basic roof to protect it from rain. There are also two M2 locomotives, numbers 1118, 1134, and one M2c, 1151, which have resided in the Virginia Scrap Iron & Metal yard since 1950 until 2009. M2c #1151 was moved on 21 August 2009, M2 #1134 moved on 24 August, and M2 #1118 on 26 August. The 1134 has received cosmetic restoration and is now located at the Railroad Museum of Virginia, in Portsmouth Virginia. 1118 was traded for 0-6-0T no. 34 and will remain at NRHS chapter's 9th Street facility. 1151 was moved to the Virginia Museum of Transportation in Roanoke.

See also

References

This article is issued from Wikipedia - version of the 9/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.