Multilaminar veneer

Multilaminar wood veneer uses plantation wood to reproduce decorative effects which are typical of quality wood species (often protected and rare). This aids the preservation of biodiversity and complies with the principles of Sustainable forest management.

Large sheets of veneer are produced on a machine similar to a lathe, these are dyed, spread with suitable adhesives, then compressed and bonded into thick (typically 70 cm) logs which are then sliced to create the end product. If the sheets are compressed between platens with an undulating surface, the slice will cross several layers to produce a patterned effect. Many different designs can be obtained by varying the platens, the dyes and the stacking order.[1]

Although the product may be considered sustainable, it does have a relatively high carbon footprint, due to the numerous dyeing, laminating, pressing and slicing operations.

References

  1. Alpi SpA. "ALPILIGNUM Production Stages". Retrieved 2006-12-05.


This article is issued from Wikipedia - version of the 10/23/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.