Monte Ceneri Rail Tunnel

Monte Ceneri Rail Tunnel
Overview
Line Gotthard
Location Canton Ticino, Switzerland
Coordinates 45°08′19″N 8°55′14″E / 45.13861°N 8.92056°E / 45.13861; 8.92056Coordinates: 45°08′19″N 8°55′14″E / 45.13861°N 8.92056°E / 45.13861; 8.92056
Status Active
Operation
Opened 1882/1913
Owner Swiss Federal Railways
Operator Swiss Federal Railways
Traffic Rail
Character Passenger and freight
Technical
Length 1,675 metres (5,495 ft)/1,692 metres (5,551 ft)
No. of tracks 1 in each of 2 bores
Track gauge 1,435 mm (4 ft 8 12 in)
Electrified Overhead catenary
11 kV AC 16 2/3 Hz

The Monte Ceneri Rail Tunnel is a railway tunnel in the Swiss canton of Ticino. The tunnel is situated under the Monte Ceneri Pass that separates the north of the canton around Bellinzona from the south of the canton around Lugano. It forms part of the Swiss Federal Railways Gotthard line, between Giubiasco and Rivera-Bironico stations. The tunnel comprises two bores, built at different times. The first bore, sometimes known as Monte Ceneri I, was opened on 10 April 1882 and is 1,675 metres (5,495 ft) in length. The second bore, Monte Ceneri II, was opened on 18 October 1933 and is 1,692 metres (5,551 ft) in length. Both bores carry a single standard gauge (1,435 mm or 4 ft 8 12 in) track electrified at 11 kV AC 16 2/3 Hz using overhead catenary.[1][2]

The rail tunnel is paralleled by the Monte Ceneri Road Tunnel, carrying the A2 motorway under the same pass. The Ceneri Base Tunnel is currently under construction beneath the pass at a much lower level.[1]

References

  1. 1 2 Eisenbahnatlas Schweiz. Verlag Schweers + Wall GmbH. 2012. p. 59. ISBN 978-3-89494-130-7.
  2. "Railway Tunnels in Switzerland > 1000m". The World's longest tunnel page. Retrieved 2014-07-30.



This article is issued from Wikipedia - version of the 11/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.