Monetary policy

Monetary policy is the process by which the monetary authority of a country, like the central bank or currency board, controls the supply of money, often targeting an inflation rate or interest rate to ensure price stability and general trust in the currency.[1][2][3]

Further goals of a monetary policy are usually to contribute to economic growth and stability, to lower unemployment, and to maintain predictable exchange rates with other currencies.

Monetary economics provides insight into how to craft optimal monetary policy. Since the 1970s, monetary policy has generally been formed separately from fiscal policy, which refers to taxation, government spending, and associated borrowing.[4]

Monetary policy is referred to as either being expansionary or contractionary. Expansionary policy is when a monetary authority uses its tools to stimulate the economy. An expansionary policy increases the total supply of money in the economy more rapidly than usual. It is traditionally used to try to combat unemployment in a recession by lowering interest rates in the hope that easy credit will entice businesses into expanding. Also, this increases the aggregate demand (the overall demand for all goods and services in an economy), which boosts growth as measured by Gross Domestic Product (GDP). Expansionary monetary policy usually diminishes the value of the currency, thereby decreasing the exchange rate.[5]

The opposite of expansionary monetary policy is contractionary monetary policy, which slows the rate of growth in the money supply or even shrinks it. This slows economic growth to prevent inflation. Contractionary monetary policy can lead to increased unemployment and depressed borrowing and spending by consumers and businesses, which can eventually result in an economic recession; it should hence be well managed and conducted with care. [6]

History

Monetary policy is associated with interest rates and availability of credit. Instruments of monetary policy have included short-term interest rates and bank reserves through the monetary base.[7] For many centuries there were only two forms of monetary policy: (i) Decisions about coinage; (ii) Decisions to print paper money to create credit. Interest rates, while now thought of as part of monetary authority, were not generally coordinated with the other forms of monetary policy during this time. Monetary policy was seen as an executive decision, and was generally in the hands of the authority with seigniorage, or the power to coin. With the advent of larger trading networks came the ability to set the price between gold and silver, and the price of the local currency to foreign currencies. This official price could be enforced by law, even if it varied from the market price.

Paper money called "jiaozi" originated from promissory notes in 7th century China. Jiaozi did not replace metallic currency, and were used alongside the copper coins. The successive Yuan Dynasty was the first government to use paper currency as the predominant circulating medium. In the later course of the dynasty, facing massive shortages of specie to fund war and their rule in China, they began printing paper money without restrictions, resulting in hyperinflation.

With the creation of the Bank of England in 1694,[8] which acquired the responsibility to print notes and back them with gold, the idea of monetary policy as independent of executive action began to be established.[9] The goal of monetary policy was to maintain the value of the coinage, print notes which would trade at par to specie, and prevent coins from leaving circulation. The establishment of central banks by industrializing nations was associated then with the desire to maintain the nation's peg to the gold standard, and to trade in a narrow band with other gold-backed currencies. To accomplish this end, central banks as part of the gold standard began setting the interest rates that they charged, both their own borrowers, and other banks who required liquidity. The maintenance of a gold standard required almost monthly adjustments of interest rates. The gold standard is a system under which the price of the national currency is measured in units of gold bars and is kept constant by the government's promise to buy or sell gold at a fixed price in terms of the base currency. The gold standard might be regarded as a special case of "fixed exchange rate" policy, or as a special type of commodity price level targeting. Nowadays this type of monetary policy is no longer used by any country. [10]

During the period 1870–1920, the industrialized nations set up central banking systems, with one of the last being the Federal Reserve in 1913.[11] By this point the role of the central bank as the "lender of last resort" was understood. It was also increasingly understood that interest rates had an effect on the entire economy, in no small part because of the marginal revolution in economics, which demonstrated how people would change a decision based on a change in the economic trade-offs.

Monetarist economists long contended that the money-supply growth could affect the macroeconomy. These included Milton Friedman who early in his career advocated that government budget deficits during recessions be financed in equal amount by money creation to help to stimulate aggregate demand for output.[12] Later he advocated simply increasing the monetary supply at a low, constant rate, as the best way of maintaining low inflation and stable output growth.[13] However, when U.S. Federal Reserve Chairman Paul Volcker tried this policy, starting in October 1979, it was found to be impractical, because of the highly unstable relationship between monetary aggregates and other macroeconomic variables.[14] Even Milton Friedman later acknowledged that direct money supply targeting was less successful than he had hoped.[15]

Therefore, monetary decisions today take into account a wider range of factors, such as:

Tools for monetary policy

Traditional tools

The central bank influences interest rates by expanding or contracting the monetary base, which consists of currency in circulation and banks' reserves on deposit at the central bank. Central banks have three main tools of monetary policy: open market operations, the discount rate and the reserve requirements.

The most commonly used tool by which the central bank can affect the monetary base is by open market operations. This entails managing the quantity of money in circulation through the buying and selling of various financial instruments, such as treasury bills, company bonds, or foreign currencies, in exchange for money on deposit at the central bank. Those deposits are convertible to currency, so all of these purchases or sales result in more or less base currency entering or leaving market circulation. For example, if the central bank wishes to lower interest rates (executing expansionary monetary policy), it purchases government debt, thereby increasing the amount of cash in circulation or crediting banks' reserve accounts. Commercial banks then have more money to lend, so they reduce lending rates, making loans less expensive. Cheaper credit card interest rates boost consumer spending. Additionally, when business loans are more affordable, companies can expand to keep up with consumer demand. They ultimately hire more workers, whose incomes rise, which in its turn also increases the demand. This tool is usually enough to stimulate demand and drive economic growth to a healthy rate. Usually, the short-term goal of open market operations is to achieve a specific short-term interest rate target. In other instances, monetary policy might instead entail the targeting of a specific exchange rate relative to some foreign currency or else relative to gold. For example, in the case of the USA the Federal Reserve targets the federal funds rate, the rate at which member banks lend to one another overnight; however, the monetary policy of China is to target the exchange rate between the Chinese renminbi and a basket of foreign currencies.

If the open market operations do not lead to the desired effects, a second tool can be used: the central bank can lower the interest rate it charges on discounts or overdrafts (loans from the central bank to commercial banks, see discount window). If the interest rate on such transactions is sufficiently low, commercial banks can borrow from the central bank to meet reserve requirements and use the additional liquidity to expand their balance sheets, increasing the credit available to the economy.

A third alternative is to change the reserve requirements. The reserve requirement refers to the proportion of total assets that banks must keep on hand overnight, either in its vaults or at the central bank. Banks only maintain a small portion of their assets as cash available for immediate withdrawal; the rest is invested in illiquid assets like mortgages and loans. Lowering the reserve requirement frees up funds for banks to increase loans or buy other profitable assets. This is expansionary because it creates credit. However, even though this tool immediately increases liquidity, central banks rarely change the reserve requirement because it is expensive and requires a lot of new policies and procedures, disrupting member banks. The use of open market operations is therefore preferred.

Other: Unconventional monetary policy at the zero bound

Other forms of monetary policy, particularly used when interest rates are at or near 0% and there are concerns about deflation or deflation is occurring, are referred to as unconventional monetary policy. These include credit easing, quantitative easing, forward guidance, and signaling.[16] In credit easing, a central bank purchases private sector assets to improve liquidity and improve access to credit. Signaling can be used to lower market expectations for lower interest rates in the future. For example, during the credit crisis of 2008, the US Federal Reserve indicated rates would be low for an "extended period", and the Bank of Canada made a "conditional commitment" to keep rates at the lower bound of 25 basis points (0.25%) until the end of the second quarter of 2010.

Further heterodox monetary policy proposals include the idea of helicopter money whereby central banks would create money without assets as counterpart in their balance sheet. The money created could be distributed directly to the population as a citizen's dividend. This option has been increasingly discussed since March 2016 after the ECB's president Mario Draghi said he found the concept "very interesting".[17]

Nominal Anchors

A nominal anchor for monetary policy is a single variable or device which the central bank uses to pin down expectations of private agents about the nominal price level or its path or about what the central bank might do with respect to achieving that path. Monetary regimes combine long-run nominal anchoring with flexibility in the short run. Nominal variables used as anchors primarily include exchange rate targets, money supply targets, and inflation targets with interest rate policy.[18]

Types

In practice, to implement any type of monetary policy the main tool used is modifying the amount of base money in circulation. The monetary authority does this by buying or selling financial assets (usually government obligations). These open market operations change either the amount of money or its liquidity (if less liquid forms of money are bought or sold). The multiplier effect of fractional reserve banking amplifies the effects of these actions.

Constant market transactions by the monetary authority modify the supply of currency and this impacts other market variables such as short-term interest rates and the exchange rate.

The distinction between the various types of monetary policy lies primarily with the set of instruments and target variables that are used by the monetary authority to achieve their goals.

Monetary Policy: Target Market Variable: Long Term Objective:
Inflation Targeting Interest rate on overnight debt A given rate of change in the CPI
Price Level Targeting Interest rate on overnight debt A specific CPI number
Monetary Aggregates The growth in money supply A given rate of change in the CPI
Fixed Exchange Rate The spot price of the currency The spot price of the currency
Gold Standard The spot price of gold Low inflation as measured by the gold price
Mixed Policy Usually interest rates Usually unemployment + CPI change

The different types of policy are also called monetary regimes, in parallel to exchange-rate regimes. A fixed exchange rate is also an exchange-rate regime; The Gold standard results in a relatively fixed regime towards the currency of other countries on the gold standard and a floating regime towards those that are not. Targeting inflation, the price level or other monetary aggregates implies floating exchange rate unless the management of the relevant foreign currencies is tracking exactly the same variables (such as a harmonized consumer price index).

In economics, an expansionary fiscal policy includes higher spending and tax cuts, that encourage economic growth.[19] In turn, an expansionary monetary policy is one that seeks to increase the size of the money supply. As usual, inciting of money supply is aimed at lowering the interest rates on purpose to achieve economic growth by increase of economic activity.[20] Conversely, contractionary monetary policy seeks to reduce the size of the money supply. In most nations, monetary policy is controlled by either a central bank or a finance ministry. Neoclassical and Keynesian economics significantly differ on the effects and effectiveness of monetary policy on influencing the real economy; there is no clear consensus on how monetary policy affects real economic variables (aggregate output or income, employment). Both economic schools accept that monetary policy affects monetary variables (price levels, interest rates).

Inflation Targeting / Inflation and Interest Rate Targets

Main article: Inflation targeting

Under this policy approach the target is to keep inflation, under a particular definition such as Consumer Price Index, within a desired range.

The inflation target is achieved through periodic adjustments to the Central Bank interest rate target. The interest rate used is generally the overnight rate at which banks lend to each other overnight for cash flow purposes. Depending on the country this particular interest rate might be called the cash rate or something similar.

As the Fisher Effect model explains, the equation linking inflation with interest rates (both foreign and abroad) is the following:

Π = i - r

Where π is the inflation at home, i is the home interest rate set by the central bank, and r is the real world interest rate. Using i as an anchor, central banks can influence π. However, a necessary assumption for this equation to hold, is that the world real interest rate is constant. Central banks can choose to maintain a fixed interest rates at all times, or to keep a constant interest rate until the real world interest rate changes. The duration of this policy varies, because of the simplicity associated with changing the nominal interest rate.

The interest rate target is maintained for a specific duration using open market operations. Typically the duration that the interest rate target is kept constant will vary between months and years. This interest rate target is usually reviewed on a monthly or quarterly basis by a policy committee.[21]

Changes to the interest rate target are made in response to various market indicators in an attempt to forecast economic trends and in so doing keep the market on track towards achieving the defined inflation target. For example, one simple method of inflation targeting called the Taylor rule adjusts the interest rate in response to changes in the inflation rate and the output gap. The rule was proposed by John B. Taylor of Stanford University.[22]

The inflation targeting approach to monetary policy approach was pioneered in New Zealand. It has been used in Australia, Brazil, Canada, Chile, Colombia, the Czech Republic, Hungary, New Zealand, Norway, Iceland, India, Philippines, Poland, Sweden, South Africa, Turkey, and the United Kingdom.

Price level targeting

Price level targeting is a monetary policy that is similar to inflation targeting except that CPI growth in one year over or under the long term price level target is offset in subsequent years such that a targeted price-level is reached over time, e.g. five years, giving more certainty about future price increases to consumers. Under inflation targeting what happened in the immediate past years is not taken into account or adjusted for in the current and future years.

Uncertainty in price levels can create uncertainty around price and wage setting activity for firms and workers, and undermines any information that can be gained from relative prices, as it is more difficult for firms to determine if a change in the price of a good or service is because of inflation or other factors, such as an increase in the efficiency of factors of production, if inflation is high and volatile. An increase in inflation also leads to a decrease in the demand for money, as it reduces the incentive to hold money and increases transaction costs and shoe leather costs.

Monetary aggregates/ Money Supply Targeting

In the 1980s, several countries used an approach based on a constant growth in the money supply. This approach was refined to include different classes of money and credit (M0, M1 etc.). In the US this approach to monetary policy was discontinued with the selection of Alan Greenspan as Fed Chairman.

This approach is also sometimes called monetarism.

Central banks might choose to set a money supply growth target as a nominal anchor to keep prices stable in the long term. The quantity theory, is a long run model, which links price levels to money supply and demand. Using this equation, we can rearrange to see the following:

Π = μ - g

Where π is the inflation, μ is the money supply growth rate and g is the real output growth. This equation suggests that controlling the money supply’s growth rate can ultimately lead to price stability in the long run. To use this nominal anchor, a central bank would need to set μ equal to a constant and commit to maintaining this target.

However, the money supply growth rate is considered a weak policy, because there is no way to target real output growth, As a result, a higher output growth rate will result in a too low level of inflation. A low output growth rate will result in inflation that would be higher than the desired level.[21]

While monetary policy typically focuses on a price signal of one form or another, this approach is focused on monetary quantities. As these quantities could have a role on the economy and business cycles depending on the households' risk aversion level, money is sometimes explicitly added in the central bank's reaction function.[23] Recently, however, central banks are shifting away from policies that focus on money supply targeting, because of the uncertainty that real output growth introduces. Some central banks, like the ECB, are choosing to combine money supply anchor with other targets.

Fixed exchange rate targeting

This policy is based on maintaining a fixed exchange rate with a foreign currency. There are varying degrees of fixed exchange rates, which can be ranked in relation to how rigid the fixed exchange rate is with the anchor nation.

Under a system of fiat fixed rates, the local government or monetary authority declares a fixed exchange rate but does not actively buy or sell currency to maintain the rate. Instead, the rate is enforced by non-convertibility measures (e.g. capital controls, import/export licenses, etc.). In this case there is a black market exchange rate where the currency trades at its market/unofficial rate.

Under a system of fixed-convertibility, currency is bought and sold by the central bank or monetary authority on a daily basis to achieve the target exchange rate. This target rate may be a fixed level or a fixed band within which the exchange rate may fluctuate until the monetary authority intervenes to buy or sell as necessary to maintain the exchange rate within the band. (In this case, the fixed exchange rate with a fixed level can be seen as a special case of the fixed exchange rate with bands where the bands are set to zero.)

Under a system of fixed exchange rates maintained by a currency board every unit of local currency must be backed by a unit of foreign currency (correcting for the exchange rate). This ensures that the local monetary base does not inflate without being backed by hard currency and eliminates any worries about a run on the local currency by those wishing to convert the local currency to the hard (anchor) currency.

Under dollarization, foreign currency (usually the US dollar, hence the term "dollarization") is used freely as the medium of exchange either exclusively or in parallel with local currency. This outcome can come about because the local population has lost all faith in the local currency, or it may also be a policy of the government (usually to rein in inflation and import credible monetary policy).

Theoretically, using Relative PPP, the rate of depreciation must equal the inflation differential.

(E(H/F) )/ (EH/F) =ΠHF

which implies that:

ΠH = (E(H/F) )/ (EH/F) +ΠF

where the subscript “H” denotes the home country and “F” indicates the foreign country. The anchor variable is the rate of depreciation, (E(H/F) )/ (EH/F) . Therefore, the rate of inflation at home must equal the rate of inflation in the foreign country plus the rate of depreciation of the exchange rate of home’s currency, relative to the other.

With a strict fixed exchange rate or a peg, the rate of depreciation of the exchange rate is set equal to zero, such as in currency unions. In the case of a crawling peg, the rate is set equal to constant. With a limited flexible band, the rate of depreciation is allowed to fluctuate within a given range.

By fixing the rate of depreciation, PPP theory concludes that the home country’s inflation rate must depend on the foreign country. For example, a two percent increase in inflation at home raises the foreign country’s inflation by two percent. Countries may decide to use a fixed exchange rate monetary regime in order to take advantage of price stability and control inflation. In practice, more than half of nation’s monetary regimes use fixed exchange rate anchoring.[21]

These policies often abdicate monetary policy to the foreign monetary authority or government as monetary policy in the pegging nation must align with monetary policy in the anchor nation to maintain the exchange rate. The degree to which local monetary policy becomes dependent on the anchor nation depends on factors such as capital mobility, openness, credit channels and other economic factors.

Nominal Anchors in practice

Nominal anchors are possible with various exchange rate regimes.

Type of Nominal Anchor Compatible Exchange Rate Regimes
Exchange Rate Target Currency Union/Countries without own currency, Pegs/Bands/Crawls, Managed Floating
Money Supply Target Managed Floating, Freely Floating
Inflation Target (+ Interest Rate Policy) Managed Floating, Freely Floating

Following the collapse of Bretton Woods, nominal anchoring has grown in importance for monetary policy makers and inflation reduction. Particularly, governments sought to use anchoring in order to curtail rapid and high inflation during the 1970s and 1980s. By the 1990s, countries began to explicitly set credible nominal anchors. In addition, many countries chose a mix of more than one target, as well as implicit targets. As a result, global inflation rates have, on average, decreased gradually since the 1970s and central banks have gained credibility and increasing independence.

The Global Financial Crisis of 2008 has sparked controversy over the use and flexibility of inflation nominal anchoring. Many economists argue that inflation targets are currently set too low by many monetary regimes. During the crisis, many inflation anchoring countries reached the lower bound of zero rates, resulting in inflation rates decreasing to almost zero or even deflation.[21]

Nominal Anchors: implications

The anchors discussed in this article suggest that keeping inflation at the desired level is feasible by setting a target interest rate, money supply growth rate, price level, or rate of depreciation. However, these anchors are only valid if a central bank commits to maintaining them. This, in turn, requires that the central bank abandons their monetary policy autonomy in the long run. Should a central bank use one of these anchors to maintain a target inflation rate, they would have to forfeit using other policies. On that note, it is important to mention that using these anchors may prove more complicated for certain exchange rate regimes. Freely floating or managed floating regimes, have more options to affect their inflation, because they enjoy more flexibility than a pegged currency or a country without a currency. The latter regimes would have to implement an exchange rate target to influence their inflation, as none of the other instruments are available to them.

Monetary policy contexts

Monetary policy in international economics

Optimal monetary policy in international economics is concerned with the question of how monetary policy should be conducted in interdependent open economies. The classical view holds that international macroeconomic interdependence is only relevant if it affects domestic output gaps and inflation, and monetary policy prescriptions can abstract from openness without harm.[24] This view rests on two implicit assumptions: a high responsiveness of import prices to the exchange rate, i.e. producer currency pricing (PCP), and frictionless international financial markets supporting the efficiency of flexible price allocation.[25][26] The violation or distortion of these assumptions found in empirical research is the subject of a substantial part of the international optimal monetary policy literature. The policy trade-offs specific to this international perspective are threefold:[27]

First, research suggests only a weak reflection of exchange rate movements in import prices, lending credibility to the opposed theory of local currency pricing (LCP).[28] The consequence is a departure from the classical view in the form of a trade-off between output gaps and misalignments in international relative prices, shifting monetary policy to CPI inflation control and real exchange rate stabilization.

Second, another specificity of international optimal monetary policy is the issue of strategic interactions and competitive devaluations, which is due to cross-border spillovers in quantities and prices.[29] Therein, the national authorities of different countries face incentives to manipulate the terms of trade to increase national welfare in the absence of international policy coordination. Even though the gains of international policy coordination might be small, such gains may become very relevant if balanced against incentives for international noncooperation.[25]

Third, open economies face policy trade-offs if asset market distortions prevent global efficient allocation. Even though the real exchange rate absorbs shocks in current and expected fundamentals, its adjustment does not necessarily result in a desirable allocation and may even exacerbate the misallocation of consumption and employment at both the domestic and global level. This is because, relative to the case of complete markets, both the Phillips curve and the loss function include a welfare-relevant measure of cross-country imbalances. Consequently, this results in domestic goals, e.g. output gaps or inflation, being traded-off against the stabilization of external variables such as the terms of trade or the demand gap. Hence, the optimal monetary policy in this case consists of redressing demand imbalances and/or correcting international relative prices at the cost of some inflation.[30]

Corsetti, Dedola and Leduc (2011)[27] summarize the status quo of research on international monetary policy prescriptions: "Optimal monetary policy thus should target a combination of inward-looking variables such as output gap and inflation, with currency misalignment and cross-country demand misallocation, by leaning against the wind of misaligned exchange rates and international imbalances." This is main factor in country money status.

Monetary policy in developing countries

Developing countries may have problems establishing an effective operating monetary policy. The primary difficulty is that few developing countries have deep markets in government debt. The matter is further complicated by the difficulties in forecasting money demand and fiscal pressure to levy the inflation tax by expanding the base rapidly. In general, the central banks in many developing countries have poor records in managing monetary policy. This is often because the monetary authority in developing countries are mostly not independent of the government, so good monetary policy takes a backseat to the political desires of the government or are used to pursue other non-monetary goals. For this and other reasons, developing countries that want to establish credible monetary policy may institute a currency board or adopt dollarization. This can avoid interference from the government and may lead to the adoption of monetary policy as carried out in the anchor nation. Recent attempts at liberalizing and reform of financial markets (particularly the recapitalization of banks and other financial institutions in Nigeria and elsewhere) are gradually providing the latitude required to implement monetary policy frameworks by the relevant central banks.

Trends in monetary policy

Transparency

Beginning with New Zealand in 1990, central banks began adopting formal, public inflation targets with the goal of making the outcomes, if not the process, of monetary policy more transparent. In other words, a central bank may have an inflation target of 2% for a given year, and if inflation turns out to be 5%, then the central bank will typically have to submit an explanation. The Bank of England exemplifies both these trends. It became independent of government through the Bank of England Act 1998 and adopted an inflation target of 2.5% RPI, revised to 2% of CPI in 2003.[31] The European Central Bank adopted, in 1998, a definition of price stability within the Eurozone as inflation of under 2% HICP. In 2003, this was revised to inflation below, but close to, 2% over the medium term. Since then, the target of 2% has become common for other major central banks, including the Federal Reserve (since January 2012) and Bank of Japan (since January 2013).[32]

Effect on business cycles

There continues to be some debate about whether monetary policy can (or should) smooth business cycles. A central conjecture of Keynesian economics is that the central bank can stimulate aggregate demand in the short run, because a significant number of prices in the economy are fixed in the short run and firms will produce as many goods and services as are demanded (in the long run, however, money is neutral, as in the neoclassical model). However, some economists from the new classical school contend that central banks cannot affect business cycles.[33]

Behavioral monetary policy

Conventional macroeconomic models assume that all agents in an economy are fully rational. A rational agent has clear preferences, models uncertainty via expected values of variables or functions of variables, and always chooses to perform the action with the optimal expected outcome for itself among all feasible actions – they maximize their utility. Monetary policy analysis and decisions hence traditionally rely on this New Classical approach.[34][35][36] [37] However, as studied by the field of behavioral economics that takes into account the concept of bounded rationality, people often deviate from the way that these neoclassical theories assume.[37][38] Humans are generally not able to react fully rational to the world around them[36] – they do not make decisions in the rational way commonly envisioned in standard macroeconomic models. People have time limitations, cognitive biases, care about issues like fairness and equity and follow rules of thumb (heuristics).[38]

This has implications for the conduct of monetary policy. Monetary policy is the final outcome of a complex interaction between monetary institutions, central banker preferences and policy rules, and hence human decision-making plays an important role.[35] It is more and more recognized that the standard rational approach does not provide an optimal foundation for monetary policy actions. These models fail to address important human anomalies and behavioral drivers that explain monetary policy decisions.[39][35][36]

An example of a behavioral bias that characterizes the behavior of central bankers is loss aversion: for every monetary policy choice, losses loom larger than gains, and both are evaluated with respect to the status quo.[35] One result of loss aversion is that when gains and losses are symmetric or nearly so, risk aversion may set in. Loss aversion can be found in multiple contexts in monetary policy. The “hard fought” battle against the Great Inflation, for instance, might cause a bias against policies that risk greater inflation.[39] Another common finding in behavioral studies is that individuals regularly offer estimates of their own ability, competence, or judgments that far exceed an objective assessment: they are overconfident. Central bank policymakers may fall victim to overconfidence in managing the macroeconomy in terms of timing, magnitude, and even the qualitative impact of interventions. Overconfidence can result in actions of the central bank that are either “too litte” or “too much”. When policymakers believe their actions will have larger effects than objective analysis would indicate, this results in too little intervention. Overconfidence can, for instance, cause problems when relying on interest rates to gauge the stance of monetary policy: low rates might mean that policy is easy, but they could also signal a weak economy.[39]

These are examples of how behavioral phenomena may have a substantial influence on monetary policy.[37] Monetary policy analyses should thus account for the fact that policymakers (or central bankers) are individuals and prone to biases and temptations that can sensibly influence their ultimate choices in the setting of macroeconomic and/or interest rate targets.[35]

See also

Notes and references

  1. Jahan, Sarwat. "Inflation Targeting: Holding the Line". International Monetary Funds, Finance & Development. Retrieved 28 December 2014.
  2. "Monetary Policy". Federal Reserve Board. January 3, 2006.
  3. "Monetary and Exchange Rate Policies". Handbook of Development Economics, Elsevier. 2010.
  4. "B.M. Friedman, "Monetary Policy," Abstract.". International Encyclopedia of the Social & Behavioral Sciences. 2001. pp. 9976–9984.
  5. Expansionary Monetary Policy: Definition, Purpose, Tools. The Balance.
  6. Contractionary Monetary Policy: Definition, Examples. The Balance.
  7. Bordo, Michael D., 2008. "monetary policy, history of," The New Palgrave Dictionary of Economics, 2nd Edition. Abstract and pre-publication copy.
  8. http://www.bankofengland.co.uk/about/pages/history/
  9. "Bank of England founded 1694". BBC. March 31, 2006.
  10. Abdel-Monem, Tarik. "What is The Gold Standard?". University of Iowa Center for The Center for International Finance and Development.
  11. "Federal Reserve Act". Federal Reserve Board. May 14, 2003.
  12. Friedman, Milton (1948). "A Monetary and Fiscal Framework for Economic Stability" (PDF). American Economic Review. 38 (3): 245–264.
  13. Friedman, Milton (1960). A Program for Monetary Stability. Fordham University Press.
  14. Bernanke, Ben (2006). "Monetary Aggregates and Monetary Policy at the Federal Reserve: A Historical Perspective". Federal Reserve.
  15. Nelson, Edward (2007). "Milton Friedman and U.S. Monetary History: 1961–2006" (PDF). Federal Reserve Bank of St. Louis Review (89 (3)): 171.
  16. Roubini, Nouriel (January 14, 2016). "Troubled Global Economy". Time Magazine. time.com. Retrieved 5 February 2016.
  17. "Permanent QE and helicopter money | Bruegel". bruegel.org. Retrieved 2016-10-06.
  18. Feenstra, Robert C., and Alan M. Taylor. International Macroeconomics. New York: Worth, 2012. 100-05.
  19. Sullivan, arthur; Steven M. Sheffrin (2003). Economics: Principles in action. Upper Saddle River, New Jersey 07458: Pearson Prentice Hall. p. 551. ISBN 0-13-063085-3.
  20. Enria, Frank (4 February 2014). "Disclosure of Accommodative Monetary Policy meaning.". USA: Frank Enria.
  21. 1 2 3 4 Feenstra, Robert C., and Alan M. Taylor. International Macroeconomics. New York: Worth, 2012. 100-05.
  22. Orphanides, Athanasios. Taylor rules (Abstract). The New Palgrave Dictionary of Economics, 2nd Edition. v. 8. pp. 200–04.
  23. Benchimol, J., Fourçans, A. (2012), Money and risk in a DSGE framework : A Bayesian application to the Eurozone, Journal of Macroeconomics, vol. 34, pp. 95-111.
  24. Cf. Clarida, R., Galí, J., Gertler, M. (2002). A simple framework for international policy analysis. Journal of Monetary Economics, 49(4), pp. 879–904.
  25. 1 2 Corsetti, G., Pesenti, P. (2005). International dimensions of optimal monetary policy. Journal of Monetary Economics, 52(2), pp. 281–305.
  26. Devereux, M.B., Engel, C. (2003). Monetary policy in the open economy revisited: Price setting and exchange rate flexibility. Review of Economic Studies, 70(4), pp. 765–783.
  27. 1 2 Cf. Corsetti, G., Dedola, L., Leduc, S. (2011). Optimal Monetary Policy in Open Economies. In B.M. Friedman and M. Woodford (Eds.). Handbook of Monetary Economics, vol. III. Amsterdam: Elsevier.
  28. Gopinath, G., Rigobon, R. (2008). Sticky borders. Quarterly Journal of Economics, 123(2), pp. 531–575.
  29. Cf. Persson, T., Tabellini, G. (1995). Double-edged incentives: Institutions and policy coordination. In G. Grossman and K. Rogoff. Handbook of International Economics, vol. III. Amsterdam: Elsevier.
  30. Cf. Corsetti, G., Dedola, L., Leduc, S. (2011). Demand imbalances, real exchange rate misalignments and monetary policy. Draft version, December 2011.
  31. "Monetary Policy Framework". Bank of England. Retrieved 19 January 2016.
  32. Noyer, Christian (12 January 2016). "Thoughts on the zero lower bound in relation with monetary and financial stability". Bank for International Settlements. Retrieved 18 January 2016.
  33. Seidman, Laurence (Fall 2007). "Reply to: "The New Classical Counter-Revolution: False Path or Illuminating Complement?"". Eastern Economic Journal. 33 (4): 563–565. JSTOR 20642378. (subscription required (help)).
  34. Cuthbertson, K., Nitzsche, D. and Hyde, S.(2008). Monetary policy and behavioral finance. Journal of Economic Surveys, 21(5), pp. 935-969.
  35. 1 2 3 4 5 Favaretto, F. and Masciandaro, D. (2016). Doves, hawks and pigeons: Behavioral monetary policy and interest rate inertia. Journal of Financial Stability, 27, pp. 50-58.
  36. 1 2 3 Hommes, C., Massaro, D. and Weber, M. (2015). Monetary Policy under Behavioral Expectations: Theory and Experiment. Tinbergen Institute Discussion Paper.
  37. 1 2 3 Rustamli, N. and Abbas, G. (2014). Monetary policy: psychology and expectations. Academic Views, January 2014.
  38. 1 2 Yellen, J.L. (2007). Implications of Behavioral Economics for Monetary Policy. Federal Reserve Bank of Boston Conference: “Implications of Behavioral Economics for Economic Policy”.
  39. 1 2 3 Calabria, M. (2016). Behavioral Economics and Fed Policymaking. Cato Journal, 36(3), pp. 573-587.

External links

This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.