Mini Marcos

Mini Marcos

1965 Mini Marcos Mark I
Overview
Manufacturer
  • Marcos (Mk 1 to Mk 5)
  • D & H Fibreglass Techniques Ltd (Mk 4)
  • Marcos Heritage Spares (Mk6)
Production 1965-1996 2005 - current
Body and chassis
Body style 2-door coupé
Related Mini
Powertrain
Engine BMC A-series as fitted to Mini
Transmission 4 speed manual
Dimensions
Wheelbase 79 in (2,007 mm)
Length 136 in (3,454 mm)
Width 56 in (1,422 mm)
Curb weight 1,050 lb (476 kg)
Chronology
Predecessor DART
Successor Midas

The Mini Marcos is an automobile which was produced in limited numbers between 1965 and 1970 by Marcos, from 1974 to 1981 by D & H Fibreglass Techniques Limited and again between 1991 and 1996 by Marcos. It was based on the DART design by Dizzy Addicott who finally sold the project to Jeremy Delmar-Morgan. Jeremy marketed the Mini DART as the Mini Jem. Jem Marsh of Marcos cars separately developed the project into the Mk I Mini Marcos and despite the similarity of the name, had nothing to do with the Mini Jem. In Sweden the Mini Marcos was sold by Elmhorn-Troberg Racing Service.[1]

Development

It was sold as a kit car utilising a fibreglass/GRP Monocoque with running gear & subframes from a Mini. During its life it went through five versions with changes including sliding windows (Mark II), rear hatch and wind-up windows (Mark IV).

1974 Mini Marcos Mark IV, with wind-up windows

The Midas succeeded the Mk.IV Mini Marcos which at that time was being made by D&H Fibreglass Techniques Limited in Oldham, but the latter marque was subsequently revived by Marcos with the Mark V.

Following the closure of the Marcos company, the Mini Marcos moulds were acquired by Rory McMath of Marcos Heritage Spares who has re-launched the car as the Heritage Mk. VI and GT, the latter being a racing version.

Motorsport

The Mini Marcos was the only British car to finish in the 1966 24 Hours of Le Mans: the drivers were Jean-Louis Marnat and Claude Ballot-Léna.

It also set four British land speed class records.[2] These are the flying mile, half mile, half kilometre and kilometre for cars up to 1600 cc.

Australian production

There were a few copies of the Mini Jem/Marcos built in Australia. John Taylor of Taylorspeed, in Adelaide, introduced the Taylorspeed Jem at a local show in 1968. The car was only sold as a kit and was made to accept any Mini internals. Most were heavily modified by their builders, and no two are alike. All in all only ten were built of the Mark I (with an oval bottomed rear window) and Mark II series (with a square rear window), of which one was sold in Singapore.[3]

Taylorspeed Jem Mk. I

References

  1. "Elmhorn-Troberg Racing Services Brochure 1967". Minimarcos.org.uk. 2003-12-13. Retrieved 2009-12-24.
  2. "This Mini World: Mini-Marcos". Autocar. 29 July 1966. p. 241.
  3. Shaw, Tony. "Mini Ds & Vs - Taylorspeed Jem". Minijem Plus. Retrieved 2013-12-09.
This article is issued from Wikipedia - version of the 3/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.