Methyl acrylate

Not to be confused with methyl methacrylate.
Methyl acrylate
Skeletal formula of methyl Acrylate
Ball-and-stick model of the methyl acrylate molecule
Names
IUPAC name
Methyl prop-2-enoate[1]
Other names
Methyl acrylate
Methyl propenoate
Methoxycarbonylethylene
Curithane 103[1]
Identifiers
96-33-3 YesY
3D model (Jmol) Interactive image
ChEMBL ChEMBL9019 YesY
ChemSpider 7022 YesY
ECHA InfoCard 100.002.274
KEGG C19443 N
PubChem 7294
Properties
C4H6O2
Molar mass 86.09 g·mol−1
Appearance Colorless liquid
Odor Acrid[2]
Density 0.95 g/cm3[3]
Melting point −74 °C (−101 °F; 199 K)[3]
Boiling point 80 °C (176 °F; 353 K)[3]
5 g/100 mL
Vapor pressure 65 mmHg (20°C)[2]
Hazards
Main hazards Harmful (Xn); Highly flammable (F+)
Safety data sheet Oxford MSDS
Flash point −3 °C (27 °F; 270 K)[3]
Explosive limits 2.8%-25%[2]
Lethal dose or concentration (LD, LC):
3575 ppm (mouse)
1350 ppm (rat, 4 hr)
1000 ppm (rat, 4 hr)
2522 ppm (rabbit, 1 hr)[4]
US health exposure limits (NIOSH):
PEL (Permissible)
TWA 10 ppm (35 mg/m3) [skin][2]
REL (Recommended)
TWA 10 ppm (35 mg/m3) [skin][2]
IDLH (Immediate danger)
250 ppm[2]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Methyl acrylate is an organic compound, more accurately the methyl ester of acrylic acid. It is a colourless liquid with a characteristic acrid odor. It is mainly produced to make acrylate fiber, which is used to weave synthetic carpets.[5] It is also a reagent in the synthesis of various pharmaceutical intermediates.

Production

The standard industrial reaction for producing methyl acrylate is esterification with methanol under acid catalysis (sulfuric acid, p-toluene sulfonic acid, acidic ion exchangers.[6]). The transesterification is facilitated because methanol and methyl acrylate form a low boiling azeotrope (b.p. 62-63 °C).[7]

The patent literature[8] describes a one-pot route involving vapor-phase oxidation of propene or 2-propenal with oxygen in the presence of methanol.

Other methods

Methyl acrylate can be prepared by debromination of methyl 2,3-dibromopropanoate with zinc.[9] Methyl acrylate is formed in good yield on pyrolysis of methyl lactate in the presence of ethenone (ketene).[10] Methyl lactate is a renewable "green chemical". Another patent[11] describes the dehydration of methyl lactate over zeolites.

The nickel tetracarbonyl-catalyzed hydrocarboxylation of acetylene with carbon monoxide in the presence of methanol also yields methyl acrylate.[12] The reaction of methyl formate with acetylene in the presence of transition metal catalysts also leads to methyl acrylate.[13] Both, the alcoholysis of propiolactone with methanol as well as the methanolysis of acrylonitrile via intermediately formed acrylamide sulfate[14] are also proven but obsolete processes.

Use

Methyl acrylate is after butyl acrylate and ethyl acrylate the third most important acrylic ester with a worldwide annual production of about 200,000 tons per year.[15]

Like ethyl acrylate also methyl acrylate reacts catalysed by Lewis bases in a Michael addition with amines in high yields to β-alanine derivatives which provide amphoteric surfactants when long-chain amines are used and the ester function is hydrolysed subsequently.

Methyl acrylate is used for the preparation of 2-dimethylaminoethyl acrylate by transesterification with dimethylaminoethanol in significant quantities of over 50,000 tons / year.[16]

Methyl acrylate is used as a comonomer in the polymerization with a variety of acrylic and vinyl monomers. In doing so it has a similar range of uses as ethyl acrylate.[17] When using methyl acrylate as comonomer resulting acrylic paints are harder and more brittle than those with the homologous acrylates. Copolymerizing methyl acrylate with acrylonitrile improves their melt processability to fibers, which could be used as precursors for carbon fibers.[18]

Acrylates are also used in the preparation of poly(amidoamine) (PAMAM) dendrimers typically by Michael addition with a primary amine.

Methyl acrylate is the precursor to fibers that are woven to make carpets.

Owing to its tendency to polymerize, samples typically contain an inhibitor such as hydroquinone.

Reactions

Methyl acrylate is a classic Michael acceptor, which means that it adds nucleophiles at its terminus. For example, in the presence of a base catalyst, it adds hydrogen sulfide to give the thioether:[19]

2 CH2CHCO2CH3 + H2S → S(CH2CH2CO2CH3)2

It is also a good dienophile.

Safety

It is an acute toxin with an LD50 (rats, oral) of 300 mg/kg and a TLV of 10 ppm.

References

  1. 1 2 "methyl acrylate - Compound Summary". PubChem. Retrieved June 30, 2012.
  2. 1 2 3 4 5 6 "NIOSH Pocket Guide to Chemical Hazards #0394". National Institute for Occupational Safety and Health (NIOSH).
  3. 1 2 3 4 Record in the GESTIS Substance Database of the IFA
  4. "Methyl acrylate". Immediately Dangerous to Life and Health. National Institute for Occupational Safety and Health (NIOSH).
  5. Takashi Ohara, Takahisa Sato, Noboru Shimizu, Günter Prescher Helmut Schwind, Otto Weiberg, Klaus Marten, Helmut Greim "Acrylic Acid and Derivatives" in Ullmann's Encyclopedia of Industrial Chemistry 2003, Wiley-VCH, Weinheim. doi: 10.1002/14356007.a01_161.pub2
  6. "Esterification: Acrylate esters (MA, EA, BA, MMA, 2-EHA)". amberlyst.com. Retrieved 2013-02-21.
  7. Chessie E. Rehberg (1955). "n-Butyl acrylate". Org. Synth. 26: 18.; Coll. Vol., 3, p. 146
  8. US 3925463, Natale Ferlazzo, & Buzzi Gian Fausto, Ghirga Marcello, "Process for the Production of Methyl Acrylate", published 1975-12-09, assigned to Societá Italiana Resine S.I.R., S.p.A.
  9. F. Beilstein: Handbuch der organischen Chemie, 3. Auflage, 1. Band. Verlag Leopold Voss, 1893, S. 501. Volltext.
  10. US 2417748, Hugh J. Hagemeyer, "Preparation of Methyl Acrylate", published 1947-03-18, assigned to Eastman Kodak Company
  11. US 5250729, Takafumi Abe, Shinichi Hieda, "Process for preparing unsaturated carboxylic acid or ester thereof", assigned to Mitsubishi Gas Chemical Company
  12. W. Reppe, J. Liebigs Ann. Chem., 582 (1), 116-132 (1953)
  13. US 6022990, Zhao-Tie Liu, Jia-Qi Zhang, Xian-Gui Yang, "Method for synthesizing methyl acrylate", published 2000-02-08, assigned to Chengdu Institute of Organic Chemistry
  14. H.-J. Arpe, Industrielle Organische Chemie, 6. Aufl., Wiley-VCH Verlag, Weinheim, 2007, ISBN 978-3-527-31540-6.
  15. CEH Marketing Research Report Acrylic Acid and Esters, SRI Consulting, Juli 2007.
  16. 2010136696, Jean-Michel Paul, Boris Tonnelier, Francis Augustin, "Composition Including Dialkyl Tin Oxide and Use Thereof as a Transesterification Catalyst for the Synthesis of (meth)acrylic Esters", published 2010-12-02, assigned to Arkema France
  17. DOW Methyl acrylate, Product Safety Assessment.
  18. V. A. Bhanu et al., [PDF "Synthesis and characterization of acrylonitrile methyl acrylate statistical copolymers as melt processable carbon fiber precursors"] (in German), Polymer 43 (18): pp. 4841–4850, doi:10.1016/S0032-3861(02)00330-0, PDF
  19. Edward A. Fehnel and Marvin Carmack (1950). "Methyl-β-dipropionate". Org. Synth. 30: 65.; Coll. Vol., 4, p. 669
This article is issued from Wikipedia - version of the 11/7/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.