Machine control

Not to be confused with Programmable logic control.

In civil engineering, machine control is used to accurately position earthwork machinery based on 3D design models and GPS systems, and thus aid machine operators to e.g. control the position of a road grader's blade.[1] Many machine control systems utilize the Real Time Kinematic (RTK) system to improve the positioning accuracy.

There are four dominant manufacturers of machine control systems: MOBA Mobile Automation AG, Trimble Navigation Limited, Topcon Positioning Systems and Leica Geosystems. In 2010, The Kellogg Report[2] was published to serve as a resource for comparing the systems from these and other manufacturers.

See also

References

  1. Heikkilä, Rauno; Jaakkola, Mika (2003), "Intelligent Road Construction Site - Development of Automation into total Working Process of Finnish Road Construction" (PDF), 2003 Proceedings of the 20th ISARC, Eindhoven, Holland, retrieved November 8, 2010
  2. The Kellogg Report LLC (2010). Article: The Kellogg Report. Retrieved December 15, 2010 from http://www.kelloggreport.com/index.html


This article is issued from Wikipedia - version of the 6/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.