M2 Hyde
| U.S. Submachinegun, Caliber .45, M2[1] | |
|---|---|
| Type | Submachine Gun |
| Place of origin | United States |
| Service history | |
| Wars | World War II |
| Production history | |
| Designer | George Hyde,[1][2] Frederick Sampson[2] |
| Manufacturer | Marlin Firearms |
| Produced | 1942-1943 |
| Specifications | |
| Weight | 9 lb 4 0z (4.19 kg) |
| Length | 32 in. (813 mm) |
| Barrel length | 12 in. (305 mm) |
|
| |
| Caliber | .45 ACP |
| Action | Blowback |
| Rate of fire | 500 rounds per minute |
| Muzzle velocity | 960 ft/s (292 m/s) |
| Feed system | Thompson submachine gun box magazine |
The Hyde-Inland M2 was a United States submachine gun design submitted for trials at Aberdeen Proving Ground in February, 1941. Work was undertaken by General Motors Inland Manufacturing Division to develop workable prototypes of George Hyde's design. The design was designated U.S. Submachinegun, Caliber .45, M2 as a substitute standard for the M1 submachine gun in April, 1942. As Inland's manufacturing capacity became focused on M1 carbine production, the US Army contracted M2 production to Marlin Firearms in July, 1942.[1] Marlin began production in May 1943; but Marlin's original contract for 164,450 M2s was canceled in 1943 upon adoption of the M3 submachine gun.[3] The M2 is chambered for the .45 ACP cartridge and used the same 20- or 30-round magazine as the Thompson. Its cyclic rate of fire is 525 rounds per minute. Only 400 at the most were manufactured and none were issued by any branches of the United States military.
Design
The M2 is a simple blowback operated design, although it was difficult to make. The receiver was built from a steel forging and a seamless tubular section, which took extra time and effort to machine and finish, causing the US Army to adopt the M3 with a simple stamped sheet metal receiver, instead. Like the American Thompson and Finnish Suomi designs, the M2 bolt was shaped with large diameter rear and slender front sections. Unlike the all metal M3 with a collapsing wire stock, the M2 had a fixed wooden stock with wooden handgrip and handguard.[4]
See also
- List of U.S. Army weapons by supply catalog designation SNL A-52
- List of individual weapons of the U.S. Armed Forces
- M3 submachine gun
- United Defense M42
References
- 1 2 3 Canfield, Bruce N. American Rifleman (August 2008) p.52
- 1 2 "patent".
- ↑ Frank Iannamico, American Thunder: the Military Thompson Submachine Guns, Moose Lake Publishing, 2000, p. 149.
- ↑ Hogg, Ian & Weeks, John. "Military Small Arms of the 20th Century". Krause Publications (2000). ISBN 0-87341-824-7
External links
- Springfield Armory Collection: M2 submachine gun
- The Unofficial Tommy Gun Page - Obsolescence
- "Research Results For 'Hyde-Inland M2'". Probert Encyclopedia. Archived from the original on 8 May 2013. Retrieved 2005-09-07.
- The Great Arsenal of DemocracyArchived July 18, 2011, at the Wayback Machine.