Low voltage

IEC voltage range AC (Vrms) DC (V) Defining risk
High voltage (supply system) > 1000 > 1500 Electrical arcing
Low voltage (supply system) 50–1000 120–1500 Electrical shock
Extra-low voltage (supply system) < 50 < 120 Low risk

Low voltage is a relative term, the definition varying by context. Different definitions are used in electric power transmission and distribution, and in the electrical safety codes define "low voltage" circuits that are exempt from the protection required at higher voltages. These definitions vary by country and specific code.


In electrical power systems low voltage most commonly refers to mains voltage as used by lighting and portable appliances. "Low voltage" in this context still presents a risk of electric shock, but only a minor risk of electric arcs through the air.

The International Electrotechnical Commission (IEC) defines supply system low voltage as voltage in the range 50–1000 V AC or 120–1500 V DC.

50–1000 V AC or 120–1500 V ripple-free DC between conductors;
50–600 V AC or 120–900 V ripple-free DC between conductors and Earth.

In electrical power distribution, the United States 2005 National Electrical Code (NEC) defines low (distribution system) voltage as 0 - 49 volt. Low distribution system voltage is covered by 250.20(A) of this code.

The NFPA standard 79 article defines distribution protected extra low voltage (PELV) as nominal voltage of 30 Vrms or 60 Vdc ripple free for dry locations and 6 Vrms or 15 Vdc in all other cases.

UL standard 508A article 43 (Table 43.1) defines 0-20 V peak/ 5 A or 20.1-42.4 V peak/ 100 VA as Low-Voltage Limited Energy circuits.

See also


    This article is issued from Wikipedia - version of the 8/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.