List of equations in classical mechanics

Classical mechanics is the branch of physics used to describe the motion of macroscopic objects.[1] It is the most familiar of the theories of physics. The concepts it covers, such as mass, acceleration, and force, are commonly used and known.[2] The subject is based upon a three-dimensional Euclidean space with fixed axes, called a frame of reference. The point of concurrency of the three axes is known as the origin of the particular space.[3]

Classical mechanics utilises many equationsas well as other mathematical conceptswhich relate various physical quantities to one another. These include differential equations, manifolds, Lie groups, and ergodic theory.[4] This page gives a summary of the most important of these.

This article lists equations from Newtonian mechanics, see analytical mechanics for the more general formulation of classical mechanics (which includes Lagrangian and Hamiltonian mechanics).

Classical mechanics

Mass and inertia

Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Linear, surface, volumetric mass density λ or μ (especially in acoustics, see below) for Linear, σ for surface, ρ for volume.

kg mn, n = 1, 2, 3 [M][L]n
Moment of mass[5] m (No common symbol) Point mass:

Discrete masses about an axis :

Continuum of mass about an axis :

kg m [M][L]
Centre of mass rcom

(Symbols vary)

ith moment of mass

Discrete masses:

Mass continuum:

m [L]
2-Body reduced mass m12, μ Pair of masses = m1 and m2 kg [M]
Moment of inertia (MOI) I Discrete Masses:

Mass continuum:

kg m2 [M][L]2

Derived kinematic quantities

Kinematic quantities of a classical particle: mass m, position r, velocity v, acceleration a.
Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Velocity v m s−1 [L][T]−1
Acceleration a m s−2 [L][T]−2
Jerk j m s−3 [L][T]−3
Angular velocity ω rad s−1 [T]−1
Angular Acceleration α rad s−2 [T]−2

Derived dynamic quantities

Angular momenta of a classical object.

Left: intrinsic "spin" angular momentum S is really orbital angular momentum of the object at every point,

right: extrinsic orbital angular momentum L about an axis,

top: the moment of inertia tensor I and angular velocity ω (L is not always parallel to ω)[6]

bottom: momentum p and it's radial position r from the axis.

The total angular momentum (spin + orbital) is J.
Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Momentum p kg m s−1 [M][L][T]−1
Force F N = kg m s−2 [M][L][T]−2
Impulse J, Δp, I kg m s−1 [M][L][T]−1
Angular momentum about a position point r0, L, J, S

Most of the time we can set r0 = 0 if particles are orbiting about axes intersecting at a common point.

kg m2 s−1 [M][L]2[T]−1
Moment of a force about a position point r0,

Torque

τ, M N m = kg m2 s−2 [M][L]2[T]−2
Angular impulse ΔL (no common symbol) kg m2 s−1 [M][L]2[T]−1

General energy definitions

Main article: Mechanical energy
Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Mechanical work due

to a Resultant Force

W J = N m = kg m2 s−2 [M][L]2[T]−2
Work done ON mechanical

system, Work done BY

WON, WBY J = N m = kg m2 s−2 [M][L]2[T]−2
Potential energy φ, Φ, U, V, Ep J = N m = kg m2 s−2 [M][L]2[T]−2
Mechanical power P W = J s−1 [M][L]2[T]−3

Every conservative force has a potential energy. By following two principles one can consistently assign a non-relative value to U:

Generalized mechanics

Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Generalized coordinates q, Q varies with choice varies with choice
Generalized velocities varies with choice varies with choice
Generalized momenta p, P varies with choice varies with choice
Lagrangian L

where and p = p(t) are vectors of the generalized coords and momenta, as functions of time

J [M][L]2[T]−2
Hamiltonian H J [M][L]2[T]−2
Action, Hamilton's principal function S, J s [M][L]2[T]−1

Kinematics

In the following rotational definitions, the angle can be any angle about the specified axis of rotation. It is customary to use θ, but this does not have to be the polar angle used in polar coordinate systems. The unit axial vector

defines the axis of rotation, = unit vector in direction of r, = unit vector tangential to the angle.

Translation Rotation
Velocity Average:

Instantaneous:

Angular velocity

Rotating rigid body:

Acceleration Average:

Instantaneous:

Angular acceleration

Rotating rigid body:

Jerk Average:

Instantaneous:

Angular jerk

Rotating rigid body:

Dynamics

Translation Rotation
Momentum Momentum is the "amount of translation"

For a rotating rigid body:

Angular momentum

Angular momentum is the "amount of rotation":

and the cross-product is a pseudovector i.e. if r and p are reversed in direction (negative), L is not.

In general I is an order-2 tensor, see above for its components. The dot · indicates tensor contraction.

Force and Newton's 2nd law Resultant force acts on a system at the center of mass, equal to the rate of change of momentum:

For a number of particles, the equation of motion for one particle i is:[7]

where pi = momentum of particle i, Fij = force on particle i by particle j, and FE = resultant external force (due to any agent not part of system). Particle i does not exert a force on itself.

Torque

Torque τ is also called moment of a force, because it is the rotational analogue to force:[8]

For rigid bodies, Newton's 2nd law for rotation takes the same form as for translation:

Likewise, for a number of particles, the equation of motion for one particle i is:[9]

Yank Yank is rate of change of force:

For constant mass, it becomes;

Rotatum

Rotatum Ρ is also called moment of a Yank, because it is the rotational analogue to yank:

Impulse Impulse is the change in momentum:

For constant force F:

Angular impulse is the change in angular momentum:

For constant torque τ:

Precession

The precession angular speed of a spinning top is given by:

where w is the weight of the spinning flywheel.

Energy

The mechanical work done by an external agent on a system is equal to the change in kinetic energy of the system:

General work-energy theorem (translation and rotation)

The work done W by an external agent which exerts a force F (at r) and torque τ on an object along a curved path C is:

where θ is the angle of rotation about an axis defined by a unit vector n.

Kinetic energy
Elastic potential energy

For a stretched spring fixed at one end obeying Hooke's law:

where r2 and r1 are collinear coordinates of the free end of the spring, in the direction of the extension/compression, and k is the spring constant.

Euler's equations for rigid body dynamics

Euler also worked out analogous laws of motion to those of Newton, see Euler's laws of motion. These extend the scope of Newton's laws to rigid bodies, but are essentially the same as above. A new equation Euler formulated is:[10]

where I is the moment of inertia tensor.

General planar motion

The previous equations for planar motion can be used here: corollaries of momentum, angular momentum etc. can immediately follow by applying the above definitions. For any object moving in any path in a plane,

the following general results apply to the particle.

Kinematics Dynamics
Position

Velocity
Momentum

Angular momenta

Acceleration
The centripetal force is

where again m is the mass moment, and the coriolis force is

The Coriolis acceleration and force can also be written:

Central force motion

For a massive body moving in a central potential due to another object, which depends only on the radial separation between the centres of masses of the two objects, the equation of motion is:

Equations of motion (constant acceleration)

These equations can be used only when acceleration is constant. If acceleration is not constant then the general calculus equations above must be used, found by integrating the definitions of position, velocity and acceleration (see above).

Linear motion Angular motion

Galilean frame transforms

For classical (Galileo-Newtonian) mechanics, the transformation law from one inertial or accelerating (including rotation) frame (reference frame traveling at constant velocity - including zero) to another is the Galilean transform.

Unprimed quantities refer to position, velocity and acceleration in one frame F; primed quantities refer to position, velocity and acceleration in another frame F' moving at translational velocity V or angular velocity Ω relative to F. Conversely F moves at velocity (—V or —Ω) relative to F'. The situation is similar for relative accelerations.

Motion of entities Inertial frames Accelerating frames
Translation

V = Constant relative velocity between two inertial frames F and F'.
A = (Variable) relative acceleration between two accelerating frames F and F'.

Relative position

Relative velocity

Equivalent accelerations

Relative accelerations

Apparent/fictitious forces

Rotation

Ω = Constant relative angular velocity between two frames F and F'.
Λ = (Variable) relative angular acceleration between two accelerating frames F and F'.

Relative angular position

Relative velocity

Equivalent accelerations

Relative accelerations

Apparent/fictitious torques

Transformation of any vector T to a rotating frame

Mechanical oscillators

SHM, DHM, SHO, and DHO refer to simple harmonic motion, damped harmonic motion, simple harmonic oscillator and damped harmonic oscillator respectively.

Equations of motion
Physical situation Nomenclature Translational equations Angular equations
SHM
  • x = Transverse displacement
  • θ = Angular displacement
  • A = Transverse amplitude
  • Θ = Angular amplitude

Solution:

Solution:

Unforced DHM
  • b = damping constant
  • κ = torsion constant

Solution (see below for ω'):

Resonant frequency:

Damping rate:

Expected lifetime of excitation:

Solution:

Resonant frequency:

Damping rate:

Expected lifetime of excitation:

Angular frequencies
Physical situation Nomenclature Equations
Linear undamped unforced SHO
  • k = spring constant
  • m = mass of oscillating bob
Linear unforced DHO
  • k = spring constant
  • b = Damping coefficient
Low amplitude angular SHO
  • I = Moment of inertia about oscillating axis
  • κ = torsion constant
Low amplitude simple pendulum
  • L = Length of pendulum
  • g = Gravitational acceleration
  • Θ = Angular amplitude
Approximate value

Exact value can be shown to be:

Energy in mechanical oscillations
Physical situation Nomenclature Equations
SHM energy
  • T = kinetic energy
  • U = potential energy
  • E = total energy
Potential energy

Maximum value at x = A:

Kinetic energy

Total energy

DHM energy

See also

Notes

  1. Mayer, Sussman & Wisdom 2001, p. xiii
  2. Berkshire & Kibble 2004, p. 1
  3. Berkshire & Kibble 2004, p. 2
  4. Arnold 1989, p. v
  5. Section: Moments and center of mass
  6. R.P. Feynman; R.B. Leighton; M. Sands (1964). Feynman's Lectures on Physics (volume 2). Addison-Wesley. pp. 31–7. ISBN 978-0-201-02117-2.
  7. "Relativity, J.R. Forshaw 2009"
  8. "Mechanics, D. Kleppner 2010"
  9. "Relativity, J.R. Forshaw 2009"
  10. "Relativity, J.R. Forshaw 2009"

References

This article is issued from Wikipedia - version of the 9/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.