Lilyvale railway station

Lilyvale railway station on the Illawarra (South Coast) railway line in New South Wales, Australia.

The first Lilyvale station opened in 1890 as 'Lilydale' station to service the small village of Lilyvale. This first Lilyvale station was located just south of the southern portal of the Lilyvale tunnel at the northern end of the Bulgo or Otford valley. To the north were the original Metropolitan Colliery siding junction with signal box and short platform and then Helensburgh station. To the south were Vickery siding and Otford station and sidings. The first Lilyvale station consisted of a single platform and weatherboard building on the western side of the original single track alignment. A road passed over a level crossing of the railway line between the tunnel and the station.

New alignment sections of the railway were constructed between Cawley and Clifton from 1912 to 1915 and the new dual track passed through a new tunnel just to the east of the old Lilvale tunnel and at a slightly lower elevation. A second Lilyvale railway station, just to the south of the original opened in 1915.[1] The second station consisted of two side platforms with weatherboard buildings and a steel overhead footbridge. Just to the south was a single lane brick vehicle bridge.

Lilyvale station was serviced by mainline Thirroul-Waterfall trains, but train ceased to service the station in 1983. The weatherboard buildings had long been removed and the station and bridges were demolished with the electrification of the line in 1989.

Platform Line Stopping pattern Notes
1 intercity services to Waterfall/Thirroul

References

  1. Lilyvale station NSWrail.net, accessed 14 October 2010.
Preceding station   NSW Main lines   Following station
towards Bomaderry
Illawarra (South Coast) Line
towards Central

Coordinates: 34°11′26″S 151°00′17″E / 34.1906°S 151.0048°E / -34.1906; 151.0048


This article is issued from Wikipedia - version of the 3/17/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.