Lattice truss bridge

Lattice Truss Bridge

Interior structure of a covered bridge utilizing a plank-lattice structure
Ancestor Truss bridge
Related None
Descendant None
Carries Pedestrians, livestock, vehicles
Span range short to medium
Material wood planks and beams or steel angles and beams, appropriate decking material
Movable No
Design effort medium
Falsework required Sometimes

A lattice bridge is a form of truss bridge that uses a large number of small and closely spaced diagonal elements that form a lattice. It was patented by architect Ithiel Town in 1820 and 1835 as Town's lattice truss.

Originally a design to allow a substantial bridge to be made from planks employing lowerskilled labor, rather than heavy timbers and more expensive carpenters, this type of bridge has also been constructed using a large number of relatively light iron or steel members. The individual elements are more easily handled by the construction workers, but the bridge also requires substantial support during construction. A simple lattice truss will transform the applied loads into a thrust, as the bridge will tend to change length under load. This is resisted by pinning the lattice members to the top and bottom chords, which are more substantial than the lattice members, but which may also be fabricated from relatively small elements rather than large beams.

Belfast truss

Belfast truss as roof support in a WW1-era aircraft hangar in the Duxford Imperial War Museum

The Belfast truss is a cross between the Town's lattice truss and the bowstring truss. It was developed in Ireland as a wide-span shallow rise roof truss for industrial structures. McTear & Co of Belfast, Ireland began fabricating these trusses in wood starting around 1866. By 1899, spans of 24 meters had been achieved, and in the 20th century, shipyards and airplane hangars demanded ever greater clear spans.[1]

Wood lattice truss bridges

Root Road Covered Bridge, Astabula, Ohio

Iron or steel lattice truss bridges

Railroad bridge across the Iowa River in Iowa City, Iowa.

Howard Carroll built the first completely wrought-iron lattice truss bridge. This was built for the New York Central Railroad in 1859.[2]

See also

Wikimedia Commons has media related to Town Lattice truss bridges.

References

  1. J. R. Gilfillan, S. G. Gilbert, The Historic Belfast Timber Truss - A Way to Promote Sustainable Roof Construction, 2002.
  2. J. A. L. Waddell, Bridge Engineering Vol. 1, Wiley, New York, 1916; page 23.
This article is issued from Wikipedia - version of the 11/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.