Laser ignition

Laser ignition is an alternative method for igniting mixtures of fuel and oxidiser. The phase of the mixture can be gaseous or liquid. The method is based on a laser igniton devices that produce short but powerful flashes regardless of the pressure in the combustion chamber. Usually, high voltage spark plugs are good enough for automotive use, as the typical compression ratio of an otto cycle internal combustion engine is around 10:1 and in some rare cases reach 14:1. However, fuels such as natural gas or methanol can withstand high compression without self ignition. This allows higher compression ratios, because it is economically reasonable, as the fuel efficiency of such engines is high. Using high compression ratio and high pressure requires special spark plugs that are expensive and their electrodes still wear out. Thus, even expensive laser ignition systems could be economical, because they would last longer.[1][2][3]

Further applications of laser ignition

Laser ignition is considered as a potential ignition system for non-hypergolic liquid rocket engines[4][5] and reaction control systems[6][7][8] which need an ignition system. Conventional ignition technologies like torch igniters are more complex in sequencing and need additional components like propellant feed lines and valves.[9] Therefore, they are heavy compared to a laser ignition system. Pyrotechnical devices allow only one ignition per unit and imply increased launch pad precautions as they are made of explosives.

References

  1. Marshall, Laura (September 2012). "Laser Car Ignition Dream Sparks Multiple Approaches". Photonics Spectra. Laurin Publishing. Retrieved 2014-04-07. “Laser plugs have no electrodes. Assuming replacement every 500 hours, this is $16,000 per year just in spark plug costs, compared to approximately $10,000 for the laser diode array. The usual advertised lifetime for laser diodes is over 10,000 hours, and, since the duty factor is 10 to 20 percent, they can potentially last for much longer.”
  2. "New way to get that vital spark - University of Liverpool". Liv.ac.uk. 2008-10-31. Archived from the original on 2014-01-10. Retrieved 2014-02-01.
  3. http://www.bbc.co.uk/news/science-environment-13160950
  4. Thomas, Matthew E.; Bossard, John A.; Early, Jim; Trinh, Huu; Dennis, Jay; Turner, James (2001-12-05). Laser Ignition Technology for Bi-Propellant Rocket Engine Applications.
  5. Börner, Michael; Manfletti, Chiara; Oschwald, Michael (2015-07-01). "Laser Re-Ignition of a Cryogenic Multi-Injector Rocket Engine".
  6. Hasegawa, Keichi; Kusaka, Kazuo; Kumakawa, Akinaga; Sato, Masahiro; Tadano, Makoto; Takahashi, Hideaki. 39th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. American Institute of Aeronautics and Astronautics. doi:10.2514/6.2003-4906.
  7. Manfletti, Chiara (2014-01-01). "Laser Ignition of an Experimental Cryogenic Reaction and Control Thruster: Ignition Energies". Journal of Propulsion and Power. 30 (4): 952–961. doi:10.2514/1.B35115. ISSN 0748-4658.
  8. Börner, Michael; Manfletti, Chiara (2014-04-19). "Status and Perspectives of Laser Ignition of a Cryogenic Research RCS Thruster".
  9. Huzel, Dieter K. (1992-01-01). Modern Engineering for Design of Liquid-Propellant Rocket Engines. AIAA. ISBN 9781600864001.


This article is issued from Wikipedia - version of the 10/5/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.