Korg Poly-61

Poly-61

Poly-61
Manufacturer Korg (Keio Electronic Laboratories)
Dates 1982-1986
Technical specifications
Polyphony 6 voices
Timbrality Monotimbral
Oscillator 2 DCOs per voice
LFO 1
Synthesis type Analog Subtractive
Filter 1 low-pass per voice
Attenuator 1 VCA per voice
1 ADSR envelope per voice
Storage memory 64 patches
Input/output
Keyboard 61 keys
External control Poly-61M has MIDI

The KORG Poly-61 is a programmable polyphonic synthesizer released by Korg in 1982,[1] as a successor to the Polysix. It was notable for being Korg's first "knobless" synthesizer - featuring a push-button interface for programming, dispensing from the Polysix's knobs and switches. The Poly-61 also moved to a hybrid tone-generation system, using digitally controlled analog oscillators or DCO's (Roland's Juno-6 had made the same leap the previous year), in place of the Polysix' more retrograde VCOs.

In 1984 a MIDI version, the Poly-61M was released featuring basic MIDI implementation.

Audio path

Oscillators

The Poly-61 offers two DCOs per voice. DCO1 provides sawtooth, pulse, and PWM waveforms. DCO2 has only sawtooth and square.

Filter

The filter has the typical controls for cutoff, resonance, keyboard tracking and envelope amount. Some of these are rather limited by the poor parameter resolution. Keyboard tracking is simply "on" or "off" for example, and resonance and envelope level (here labelled "EG Intensity") have only 8 values.

Output

The final component in the audio path is a VCA. It can be driven by the envelope generator or a CV/Gate pulse.

Embedded Processors

NEC D8049C - 8 bits, 11 MHz (max.), 40 pins (DIP), Supply Voltage = 5V

There are 2 of them on the CPU board (KLM-509), one is a Programmer and the other is an Assigner.

The 8049 has 2 kB of masked ROM as well as 128 bytes of RAM and 27 I/O ports. The µC's oscillator block divides the incoming clock into 15 internal phases, thus with its 11 MHz max. crystal, one gets 0.73 MIPS (of one-clock instructions). Some 70% of instructions are single byte/cycle, but 30% need two cycles and/or two bytes, so raw performance is closer to 0.5 MIPS. The minimum instruction length is 8 bits and the maximum instruction length is 16 bits.[2]

Modulation

Envelope generator

The envelope is an ADSR type. All parameters can only be set to one of 16 values.

There are 6 SSM-2056 analog envelope generator chips used in the Poly 61, each being controlled by discrete 4-bit D/A converters. This means there are only 16 possible settings for each of the ADSR parameters.

LFO

The LFO (known as a 'modulation generator' on the Poly-61) is a simple triangle wave that can be routed to the DCOs or VCF. It has a variable delay before it is triggered.

Notable Users

References

  1. "POLY-61 Programmable Polyphonic Synthesizer (1982-11)". Korg Museum, Sound Make Up. Korg Inc.
  2. http://www.datasheetarchive.com/shortform-datasheet/UPD8049C.html
This article is issued from Wikipedia - version of the 8/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.