Jointer plane
Jointer plane
The jointer plane (also known as the try plane or trying plane) is a type of hand plane used primarily to straighten the edges of boards in the operation known as jointing. A jointer plane may also be used to flatten the face of a board. Its long length is designed to 'ride over' the undulations of an uneven surface, skimming off the peaks, gradually creating a flat surface. In thicknessing or preparing rough stock, the jointer plane is usually preceded by the fore plane or jack plane and followed by the smoothing plane.[1]
Jointer planes are typically 20 to 24 inches (510 to 610 mm) long.
See also
References
- ↑ Schwarz, Christopher. "Understanding Bench Planes", Popular Woodworking Magazine, 08 October 2008, Retrieved on 22 April 2015
This article is issued from Wikipedia - version of the 7/24/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.