JASO M345

JASO M345 is a quality classification standard for two stroke engine oils for engines of Japanese origin. It was introduced by the Japanese Automotive Standards Organization (JASO) in 1994 as JASO M345-93 with the quality levels JASO FA, JASO FB and JASO FC – with FC setting the highest standard. It was revised in 2004 as JASO M345:2004 which discontinued the FA level, and introduced the new JASO FD level – the FA level supersedes JASO FC as the highest rating.[1]

The different quality levels set requirements with regards to properties such as minimum lubrication, minimum detergency, maximum smoke and maximum deposits. A two stroke engine oil is granted the official JASO seal if it has been independently tested. The seal is a rectangle; in the upper quarter of the rectangle will be a serial number, and the lower three quarters will just have the letters MA.

Overview

JASO FA – original spec established regulating lubricity, detergency, initial torque, exhaust smoke and exhaust system blocking.

JASO FB – improved requirements over FA with regards to lubricity, detergency, exhaust smoke and exhaust system blocking.

JASO FC – lubricity and initial torque requirements same as FB, however far higher requirements over FB with regards to detergency, exhaust smoke and exhaust system blocking.

JASO FD - same as FC, except with far higher detergency requirement.

External links

References

  1. "Two-stroke motorcycle oils - JASO M345 standard". www.mceo.com. The Lubrizol Corporation. Retrieved 21 October 2013.
This article is issued from Wikipedia - version of the 6/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.