Inventive step under the European Patent Convention

Legal requirements applicable to European patent applications and patents
Note: The above list of legal requirements is not exhaustive.

Under the European Patent Convention (EPC), European patents shall be granted for inventions which inter alia involve an inventive step.[1] The central legal provision explaining what this means, i.e. the central legal provision relating to the inventive step under the EPC, is Article 56 EPC. It provides that an invention, having regard to the state of the art, must not be obvious to a person skilled in the art. The Boards of Appeal of the European Patent Office (EPO) have developed an approach, called the "problem-and-solution approach", to assess whether an invention involves an inventive step.[2]

Problem-and-solution approach

The Examining Divisions, the Opposition Divisions, and the Boards of Appeal of the EPO predominantly[notes 1] apply the "problem-and-solution approach" (also called "problem-solution approach") in order to assess and decide whether an invention involves an inventive step.[3] The problem-solution approach was "selected" mostly for historical and pragmatic reasons. Indeed, when setting up the European Patent Convention, the approaches to assess inventivity in national countries differed substantially from each other, and it was felt that a unique, consistent approach to inventity was needed.[4] The "problem-solution approach" was reportedly invented by Hungarian former Board of Appeal member G. Szabó.[5]

The problem-solution approach essentially consists in three steps:

  1. identifying the closest prior art, i.e. the most relevant piece of prior art or a suitable starting point for assessing inventive step, and determining the difference(s) between the invention and the closest prior art;
  2. determining the technical effect brought about by the difference(s), and that defines the objective technical problem (namely, in the view of the closest prior art, the technical problem which the claimed invention addresses and successfully solves); and
  3. examining whether or not the claimed solution to the objective technical problem is obvious for the skilled person in view of the state of the art in general.[6]

Closest prior art, or appropriate starting point

This first step of the problem-solution approach consists in selecting the most promising starting point from which a skilled person could have arrived at the claimed invention. In other words, the most promising springboard towards the invention is to be determined. This public piece of prior art is called the closest prior art,[7] which is supposed to be "nearer the invention than any other cited piece of prior art."[8] According to Board of Appeal member Graham Ashley, the expression "appropriate starting point" is probably more relevant since the inventive assessment could in fact be started from more than one piece of prior art. Indeed, there is no requirement to select a unique piece of prior art as starting point and stick with that piece of prior art. The problem-solution approach may need to be conducted from different starting points.[9][10]

The closest prior art need not however be a document. The closest prior art can arise from a public prior use. Indeed, "features rendered available to the public by [a] public prior use ... can be considered as the closest state of the art."[11] The notional person skilled in the art is assumed to be aware of the totality of the prior art pertinent to the relevant area of technology and in particular of everything made available to the public within the meaning of Article 54(2) EPC.[12]

Objective technical problem, or task to be addressed by the skilled person

The second step is to determine the objective technical problem, i.e., determining, in the light of the closest prior art, the technical problem, or task (German: Aufgabe),[13] which the claimed invention addresses and successfully solves. This implies determining the feature(s) distinguishing the claimed subject-matter from the closest prior art, determining the technical effect(s) of the distinguishing feature(s), and finally the objective technical problem, or task, is how to adapt or modify the closest prior art to obtain the identified technical effect. The objective technical problem has to be formulated in such a manner that it does not contain pointers to the solution. In other words, the technical problem has to be formulated without including therein a part of a solution provided by the invention. Otherwise, this would result in an ex post facto assessment of inventive step, i.e. an assessment made with hindsight.[14]

The problem used for the problem-solution approach need not be identical to the one originally mentioned by the inventor in the patent application. The problem may be reformulated, at least to a certain extent, if necessary.[15]

Any alleged technical effect that would be brought about by the differences between the claimed invention and the closest prior art must be proved, otherwise the problem must be reformulated, as mentioned above.[16] "Alleged advantages to which the patent proprietor/applicant merely refers, without offering sufficient evidence to support the comparison with the closest prior art, cannot be taken into consideration in determining the problem underlying the invention and therefore in assessing inventive step".[17] In other words, it must be credible that the problem is effectively solved over the whole claimed range.[18]

Solution to the objective technical problem, and whether the subject-matter is obvious

The last step of the problem-solution approach is conducted according to the "could-would approach". Pursuant to this approach, the question to address in order to assess whether the invention involves an inventive step is the following (the question is the climax of the problem-solution approach):

Is there any teaching in the prior art, as a whole, that would, not simply could, have prompted the skilled person, faced with the objective technical problem formulated when considering the technical features not disclosed by the closest prior art, to modify or adapt said closest prior art while taking account of that teaching [the teaching of the prior art, not just the teaching of the closest prior art], thereby arriving at something falling within the terms of the claims, and thus achieving what the invention achieves?

If the skilled person would have been prompted to modify the closest prior art in such a way as to arrive at something falling within the terms of the claims, then the invention does not involve an inventive step.

The point is not whether the skilled person could have arrived at the invention by adapting or modifying the closest prior art, but whether he would have done so because the prior art incited him to do so in the hope of solving the objective technical problem or in expectation of some improvement or advantage.[19] There has to be a reason for combining two documents. This must have been the case for the skilled person before the filing or priority date valid for the claim under examination.

Partial problems

When applying the problem-solution approach, the objective technical problem is sometimes regarded as an aggregation of a plurality of "partial problems". "This is the case where there is no technical effect achieved by all the distinguishing features taken in combination, but rather a plurality of partial problems is independently solved by different sets of distinguishing features."[20] In that case, each set of distinguishing features is assessed independently.[21]

For instance, two differences may be identified between the claimed subject-matter and a document considered to be the closest prior art, whereas these two differences solve two different objective problems which are independent from each other. The two objective problems may then be treated "as separate partial problems for the purposes of assessing inventive step."[22]

Inventions consisting in a mixture of technical and non-technical features

An invention may consist in a mixture of technical and non-technical features. In such cases, the EPO generally applies the so-called "Comvik approach" (cf. T 641/00) to assess whether the invention involves an inventive step.[23] In the "Comvik approach", any non-technical feature, i.e. a feature from a field excluded from patentability under Article 52(2) and (3) EPC, is ignored for the assessment of inventive step, unless the non-technical features do interact with the technical subject-matter to solve a technical problem.[24] Assessing whether or not a feature contributes to the technical character of a claim has been viewed as difficult.[25]

The Comvik approach set out in decision T 641/00 is consistent with the principle that "technically non-functional modifications are (...) irrelevant to inventive step, even if the skilled person would never think of such a modification."[26] A modification in a device which is such that the modification has no technical effect, i.e. no effect on the operation of the device, does not involve a solution to a technical problem. An arbitrary modification of a device does not involve an inventive step if the modification has no technical relevance.[26]

Landmark decisions

T 24/81 developed the "problem-solution approach", now well-known approach to decide whether an invention involves an inventive step.

T 2/83 investigated the "could-would" question when determining if the skilled person is prompted to combine two prior art references.[27] The decision also discussed the so-called "problem-inventions", namely the discovery of an unrecognised problem which may in certain circumstances lead to patentable subject-matter even though the claimed solution "is retrospectively trivial and in itself obvious".[28] If the identification of a problem is not obvious, "the solution to the problem can not be obvious either, even if it retrospectively appears to be trivial in view of the identified problem."[29]

Notes

  1. An exception among the numerous decisions of the Boards of Appeal that have applied the "problem-and-solution approach" is T 465/92 (Aluminium alloys) of 14.10.1994.[3] Its headnote reads: "The "problem and solution approach" is no more than one possible route for the assessment of inventiveness. Accordingly, its use is not a sine qua non when deciding inventiveness under Article 56 EPC."

References

  1. Article 52(1) EPC
  2. Knesch, G. "Assessing Inventive Step in Examination and Opposition Proceedings in the EPO" (PDF). epi Information. pp. 95–101. Archived from the original (PDF) on 7 August 2011. Retrieved 16 August 2015.
  3. 1 2 Legal Research Service for the Boards of Appeal, European Patent Office, Case Law of the Boards of Appeal of the EPO (8th edition, July 2016), i.d.2 : "Problem and solution approach"
  4. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 1: The problem-solution approach. Munich, Germany: European Patent Office. 2:17 to 5:54 minutes in. Retrieved August 12, 2012.
  5. Robert Young (8–9 November 2012). EPO boards of appeal and key decisions: Disclaimers and their legal basis, especially in the light of decisions G 1/03, 2/03 and G 2/10 – possible consequences for their use as an instrument of patent prosecution (Part 2 of 3). Munich, Germany: European Patent Office. 2:18 to 3:08 minutes in. Retrieved November 10, 2013. Invented by a Hungarian gentleman called Mr. Szabo (...).
  6. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 1: The problem-solution approach. Munich, Germany: European Patent Office. 5:55 to 9:26 minutes in. Retrieved August 12, 2012.
  7. Decision T 1742/12 (On-demand instantiation/RAYTHEON) of 22.6.2016, point 6.2: "The "closest prior art" is often characterised as being the "most promising springboard to the invention" (see in particular T 254/86, OJ EPO 1989, 115, Reasons 15; and T 656/90, Reasons 1.1)."
  8. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 2: Starting point and relevant BoA decisions. Munich, Germany: European Patent Office. 0:12 to 1:37 minutes in. Retrieved August 12, 2012.
  9. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 2: Starting point and relevant BoA decisions. Munich, Germany: European Patent Office. 3:32 to 5:00 minutes in. Retrieved August 12, 2012. (referring to decision T 824/05 of September 28, 2007)
  10. Decision T 1742/12 (On-demand instantiation/RAYTHEON) of 22.6.2016, point 6.5, first sentence: "It has, however, been acknowledged that the choice of the closest prior art may not always be unambiguous and that, in such a case, the problem-solution approach may have to be repeated starting from other pieces of prior art (see T 710/97, Reasons 3.2.1)." and point 2.2, third paragraph, second sentence: "It is legitimate to start the inventive step assessment from multiple different documents."
  11. Decision T 1464/05 of the Technical Board of Appeal 3.4.02 of 14 May 2009, Reasons 5.2.1, last paragraph.
  12. Decision T 1464/05, Reasons 5.2.2, third paragraph.
  13. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 3: (New) problem/task. Munich, Germany: European Patent Office. 0:46 to 1:04 minutes in. Retrieved August 12, 2012.
  14. Legal Research Service for the Boards of Appeal, European Patent Office, Case Law of the Boards of Appeal of the EPO (8th edition, July 2016), i.d.4.3.1 : "No pointer to the solution"
  15. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 3: (New) problem/task. Munich, Germany: European Patent Office. 1:05 to 1:46 and 5:59 to 10:12 minutes in. Retrieved August 12, 2012. (referring to decisions T 13/84, T 386/89, and T 452/05)
  16. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 3: (New) problem/task. Munich, Germany: European Patent Office. 10:15 to 13:02 minutes in. Retrieved August 12, 2012. (referring to decisions T 355/97 and T 87/08)
  17. Board of Appeal decision T 258/05 of 21 June 2007, Reasons 5.4, referring to "Case Law of the Boards of Appeal of the European Patent Office, 5th Edition 2006, I.D.4.2".
  18. See for instance Board of Appeal decision T 1621/08 of 17 September 2010, Reasons 2.1.3 to 2.1.4.; or decision T 1214/09, point 4.8.3: "...it may be questioned whether the alleged effect is actually achieved over the whole scope of the claim."
  19. Graham Ashley (23–24 March 2011). Case law of the EPO boards of appeal: a review by internal and external experts, Inventive step, Part 5: Obviousness, bonus effects, secondary indications. Munich, Germany: European Patent Office. 3:04 to 11:24 minutes in. Retrieved August 12, 2012. (referring to decisions T 2/83, T 301/01: "The main purpose of the [could-would] approach is to distinguish purely theoretical combinations of features from the prior art (the "could") from such combinations which are indicated to the skilled person on the basis of the technical result he had set out to achieve (the "would"). Seen in this light the "could/would approach" is nothing more than a re-statement of one aspect of the underlying guiding principle of the examination of inventive step in the European Patent Office, namely that of problem and solution. (...)", and T 142/84)
  20. Guidelines for Examination in the EPO, section g-vii, 5.2 : "Formulation of the objective technical problem"
  21. Guidelines for Examination in the EPO, section g-vii, 6 : "Combining pieces of prior art"
  22. Decision T 1095/07 of 20 January 2010, reasons 3.2.
  23. Special edition OJ EPO 2/2011, EPO Board of Appeal Case Law, p. 16
  24. Decision T 154/04 of November 15, 2006, Reasons 5 (F), published in the Official Journal of the European Patent Office 2008, 46.
  25. Decision T 1749/06 of the Technical Board of Appeal 3.4.03 of 24 February 2010, Reasons for the Decision 4.2.2. Discussed in Special edition OJ EPO 2/2011, EPO Board of Appeal Case Law, p. 15: "The board noted the difficulty of assessing whether or not a feature contributed to the technical character of a claim."
  26. 1 2 T 176/97 (Ionizing fluid/IBBOTT) of 18.3.1998, point 4.4, fifth paragraph, of the reasons. Cited in T 641/00, point 6 of the reasons, and in Ian Harris (8–9 November 2012). EPO boards of appeal and key decisions: Patentability of computer-based and business-related inventions from the perspective of a patent attorney (Part 2 of 3). Munich, Germany: European Patent Office. 1:37 to 2:37 minutes in. Retrieved November 9, 2013.
  27. T 2/83 (Simethicone Tablet) of 15.3.1984, reasons 7: "The question regarding the inventive step, in relation to the modification of the layered tablet of the state of the art as suggested by the present applicants, is not whether the skilled man could have inserted a barrier between the layers but whether he would have done so in expectation of some improvement or advantage."
  28. T 2/83, Headnote I, and reasons 6: "The discovery of a yet unrecognised problem may, in certain circumstances, give rise to patentable subject-matter in spite of the fact that the claimed solution is retrospectively trivial and in itself obvious ("problem inventions")."
  29. T 1641/09, reasons 3.2.6-3.2.7.

Further reading

External links

This article is issued from Wikipedia - version of the 8/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.