Ingula Pumped Storage Scheme

Ingula Pumped Storage Scheme
Location of Ingula Pumped Storage Scheme in South Africa
Country South Africa
Location KwaZulu-Natal/Free State
Coordinates 28°16′54″S 29°35′08″E / 28.28167°S 29.58556°E / -28.28167; 29.58556Coordinates: 28°16′54″S 29°35′08″E / 28.28167°S 29.58556°E / -28.28167; 29.58556
Status Partially operational; undergoing commissioning
Construction began 2005
Commission date 2016/17 (est.)
Construction cost US$3.5 billion (R25 billion)
Owner(s) Eskom and CMC Impregilo Mavundla
Pumped-storage power station
Upper reservoir Bedford Reservoir
Upper res. capacity 22,400,000 m3 (18,200 acre·ft)
Lower reservoir Bramhoek Reservoir
Lower res. capacity 26,300,000 m3 (21,300 acre·ft)
Hydraulic head 480 m (1,570 ft)[1]
Pump-generators 4 x 333 megawatts (447,000 hp) reversible Francis-type
Power generation
Nameplate capacity 1,332 MW

The Ingula Pumped Storage Scheme (previously named Braamhoek) is pumped-storage power station in the escarpment of the Little Drakensberg range straddling the border of the KwaZulu-Natal and Free State provinces, South Africa. It is about 22 km (14 mi) southwest of Van Reenen. The pumped-storage hydroelectric scheme consists of an upper and a lower dam 4.6 kilometres (2.9 mi) apart and connected to a power station by tunnels. It was constructed by an Eskom and CMC Impregilo Mavundla Joint Venture[2] The scheme was built at a cost of US$3.5 billion (R25 billion).[3] Construction began in 2005 and the power station was scheduled to begin operations in late 2015,[4][5] but the first two generators were not commissioned until March 2016, the third was brought into commercial operation in August 2016, and the remaining are expected by 2017.[6][7]

The pumped-storage hydroelectric plant uses water from the upper reservoir to generate electricity during the peak demand periods of the day. At night, excess power on the grid generated by conventional coal and nuclear plants is used to pump water to the upper reservoir. The upper Bedford Dam on Bedford stream, a tributary of the Wilge River, was completed in April 2011. It is a 39 m (128 ft) tall concrete-face rock-fill dam. It has a 22,400,000 m3 (18,200 acre·ft) water storage capacity of which 19,200,000 m3 (15,600 acre·ft) can be used for power generation. The lower Bramhoek Dam on Bramhoek stream, a tributary of the Klip River, was completed in November 2011. It is a 41 m (135 ft) tall roller-compacted concrete gravity dam. It has a 26,300,000 m3 (21,300 acre·ft) water storage capacity of which 21,900,000 m3 (17,800 acre·ft) can be pumped up to the upper reservoir. A 2 km (1.2 mi) long headrace tunnel connects the upper reservoir to the underground power station which will house 4 x 333 megawatts (447,000 hp) reversible Francis pump-turbines. The elevation between the two reservoirs affords a hydraulic head (water drop) of 480 m (0.30 mi). Water from the power station is discharged down a 2.5 km (1.6 mi) long tailrace tunnel to the lower reservoir.[1][5][8]

See also

References

  1. 1 2 "Ingula 1,333 MW Pumped Storage Scheme". Knight Piésold. Retrieved 12 January 2015.
  2. "Ingula Update" (PDF). Eskom. November 2009. Retrieved 9 January 2010.
  3. "Ingula Pumped Storage Scheme". GIBB. Retrieved 12 January 2015.
  4. "The Ingula Pumped Storage Scheme". Royal Haskoning. Retrieved 12 January 2015.
  5. 1 2 "Ingula Pumped Storage Scheme". Eskom. Retrieved 12 January 2015.
  6. "S.Africa: Ingula Pumped Storage Scheme's second unit synchronised". ESI Africa. 1 April 2016. Retrieved 1 April 2016.
  7. "Load shedding is history, says Eskom as another Ingula unit goes live". News24. Retrieved 31 August 2016.
  8. Lonsdale, Lauren (June 2010). "Ingula pumped storage dams progressing well". Civil Engineering. 18 (5): 24. Retrieved 12 January 2015.


This article is issued from Wikipedia - version of the 8/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.