In-target probe

In-target probe, or ITP is a device used in computer hardware and microprocessor design, to control a target microprocessor or similar ASIC at the register level. It generally allows full control of the target device and allows the computer engineer access to individual processor registers, program counter, and instructions within the device. It allows the processor to be single-stepped or for breakpoints to be set. Unlike an in-circuit emulator (ICE), an In-Target Probe uses the target device to execute, rather than substituting for the target device.

External links

Main

Architectures

Families

4-bit	TLCS-47 TMS 1000 S1C6x μCOM-4 MARC4

8-bit	AVR PIC10/12/16/17/18 COP8 MCS-48/51 Z8 eZ80 68HC08/11 H8 TLCS-870 XC800 740

16-bit	C166 CR16/CR16C H8S MSP430 PIC24/dsPIC R8C RL78 TLCS-900 XC 2000 XE166 68HC12/16

32-bit	Am29000 ARM AVR32 ColdFire CRX FR FR-V H8SX M32R MPC5xx PIC32 PowerPC Propeller TLCS-900 TriCore V850

64-bit	ARM64 PowerPC64 MIPS64

Interfaces

Programming	In-circuit serial programming (ICSP) In-system programming (ISP) Program and Debug Interface (PDI) High-voltage serial programming (HVSP) High voltage parallel programming (HVPP) Bootloader ROM aWire

Debugging	debugWIRE Joint Test Action Group (JTAG) In-circuit debugging (ICD) In-circuit emulator (ICE) In-target probe (ITP)

Simulators

Lists