Henry Hoy

Henry Albert Hoy (1855–1910) was a locomotive engineer with the Lancashire and Yorkshire Railway (L&YR). Hoy was born on 13 January 1855 in London, and educated at King Edward VI's Grammar School in St Albans, and at St John's College, Liverpool University.

Career

London and North Western Railway

In 1872 he began an apprenticeship under Francis William Webb at the London and North Western Railway's Crewe works. In 1878 Hoy transferred to the drawing office, where he designed continuous brakes.

Lancashire and Yorkshire Railway

In 1884 Hoy moved to the L&YR, becoming an outdoor assistant in the locomotive department under Barton Wright in Manchester; he was promoted to works manager a year later. In 1886 Hoy was made works manager at the L&YR's new works at Horwich. He worked principally on electrical engineering.

When John Aspinall was appointed General Manager, Hoy became Chief Mechanical Engineer. His principal contribution was the design of an electrification system for the Liverpool to Southport line, including motor bogies.

Locomotive designs

See: Locomotives of the Lancashire and Yorkshire Railway

Hoy's only locomotive design was a twenty-strong class of troublesome 2-6-2Ts, built 1903–04, which became LMS nos. 11700-11716.

He conducted various other experiments. One of these was the use of a new brass alloy for making firebox stays. Its composition was 62% parts copper, 38% parts zinc and 0.37% of iron.[1] This alloy was a failure. Despite being claimed to be more elastic, it suffered problems in service. In the worst of these, a fatal boiler explosion with a Class 30 0-8-0 near Knottingley in 1901 was caused by the failure of a number of firebox rod stays made from this alloy. These locomotives were an Aspinall design, but had been constructed during Hoy's tenure. On investigation it was found that the alloy was brittle enough to have cracked, even within the thickness of the copper plates of the firebox. Previously the boiler had given trouble with leaks from its stays, probably from early cracking, and where the heads of the stay had been hammered to caulk this, this had caused the heads of the stays to crack.[1][2] The size of the firebox waterspace was also criticised, although this was due to Aspinall's standard boilers, rather than Hoy's construction. A waterspace of only 2 12 inches (64 mm) was narrow, but not unique for contemporary practice. The L&Y did though make it a policy to provide a waterspace of 4 inches after this, even at the cost of a reduction in grate area.[2]

Hoy sought to avoid the problems of the stayed firebox altogether and so developed an alternative boiler and firebox for the Class 30. This used a corrugated tubular furnace and cylindrical outer firebox, as for the Lentz boiler.[3] The furnace was also of steel, rather than the copper used for fireboxes at this time.[3] One, no. 396, was rebuilt in 1903 and 20 more were built new with this boiler.[2] The new boiler design did not last long in service and the locomotives were rebuilt with conventional boilers after ten years.[note 1][2] Hoy's successor, George Hughes, described these boilers unfavourably in papers read to the I. Mech E..[4][5]

Beyer Peacock

In 1904 Hoy resigned from the L&YR to become general manager of Beyer, Peacock and Company in Manchester. He was replaced by George Hughes. There he reorganised the works, but died on 24 May 1910.

Patents

References

  1. The eight to ten year interval before rebuilding would be a typical service life for such a boiler. It indicates that the boilers were adequate, and were not withdrawn from service merely to replace them, but also that the experiment was not considered a success and so they were not continued with.
  1. 1 2 Hewison, Christian H. (1983). Locomotive Boiler Explosions. David and Charles. pp. 110–111. ISBN 0-7153-8305-1.
  2. 1 2 3 4 Cook, A.F. (1999). Raising Steam on the LMS. RCTS. pp. 23–26. ISBN 0-901115-85-1.
  3. 1 2 Ahrons, E.L. (1966). The British Steam Railway Locomotive. I, to 1925. Ian Allan. p. 351.
  4. Hughes, George (February 1906). Proc. I. Mech E. Missing or empty |title= (help)
  5. Hughes, George (July 1909). Proc. I. Mech E. Missing or empty |title= (help)
  6. "Espacenet - Bibliographic data". Worldwide.espacenet.com. Retrieved 2013-01-13.
  7. "Espacenet - Bibliographic data". Worldwide.espacenet.com. Retrieved 2013-01-13.
  8. "Espacenet - Bibliographic data". Worldwide.espacenet.com. Retrieved 2013-01-13.
  9. "Espacenet - Bibliographic data". Worldwide.espacenet.com. Retrieved 2013-01-13.

External links

Preceded by
John Aspinall
Chief Mechanical Engineer of the Lancashire and Yorkshire Railway
1899 – 1904
Succeeded by
George Hughes
1904-1922
This article is issued from Wikipedia - version of the 2/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.