Hardiman

For people named Hardiman, see Hardiman (surname).
Hardiman

Hardiman I prototype
Creator General Electric
Country  United States
Year 1965

Hardiman was the first attempt to build a practical powered exoskeleton, by General Electric between 1965 and 1971.[1] The machine was intended to allow the wearer to lift loads of 1500 pounds (680 kg) with ease. The project was led by the engineer Ralph Mosher, who had previously worked on the Handyman.

The project was not successful overall. Any attempt to use the full exoskeleton resulted in a violent uncontrolled motion, and as a result the exoskeleton was never turned on with a person inside. According to General Electric's Hardiman Project Report from 1969, "When turned on power to operate the shoulder joint, the arm lurched and the elbow would not operate."[2] Further research concentrated on one arm. Although it could lift its specified load of 750 pounds (340 kg), it weighed three quarters of a ton, just over twice the liftable load. Without getting all the components to work together the practical uses for the Hardiman project were limited.

References

  1. ↑ 1965-71 - G.E. Hardiman I Exoskeleton Ralph Mosher (American) - cyberneticzoo.com
  2. ↑ Haridman I Arm Test, Hardiman I Prototype Project, December 31, 1969


This article is issued from Wikipedia - version of the 9/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.