HUBO

This article is about the humanoid robot. For the automotive metering device, see Hubometer.
HUBO

Albert HUBO, the latest humanoid version of the HUBO robots, can make expressive gestures with its 5 separate fingers.
Manufacturer KAIST
Year of creation 2005
HUBO
Hangul 휴보
Revised Romanization Hyubo
McCune–Reischauer Hyubo

HUBO (Korean: 휴보; designated KHR-3) is a walking humanoid robot, head mounted on a life-size walking bipedal frame, developed by the Korea Advanced Institute of Science and Technology (KAIST) and released on January 6, 2005. According to Hubo's creator Prof Jun-Ho Oh and his Plenary Session at ICRA 2012 entitled Development Outline of the Humanoid Robot: HUBO II the name Hubo is short form for nothing, it is just Hubo.

Hubo has voice recognition and synthesis faculties, as well as sophisticated vision in which its two eyes move independently of one another.

Prototypes

Korea's history in robotics engineering is relatively short. KAIST only began research in 2000, led by professor Oh Jun-ho. The first prototype, KHR-0, consisting of two legs without an upper body was built by 2001. KHR-1 was developed without a head or hands released in 2003, followed by a complete humanoid KHR-2 in 2004.[1]

KHR-3 HUBO

On January 25, 2005, Gizmag reported on KAIST's unveiling of the KHR-3 HUBO.[2]

The KHR-3's physical specifications, such as height, weight, and the number of DOFs (degrees of freedom), were similar to Honda's ASIMO, which served as the benchmark for the project. In terms of AI and movements, HUBO fell short of the "next-gen ASIMO," which was unveiled three months later. While HUBO could only walk at 1.25 km/h, the ASIMO could walk at 2.5 km/h and also run at 3 km/h. The ASIMO was also capable of walking up and down stairs, which was a temporary shortcoming for HUBO needing further development. KAIST researchers noted, however, that HUBO could play kai-bai-bo (the Korean version of rock-paper-scissors), which was impossible for ASIMO since its fingers could not move independently of each other.[1]

Albert Hubo

Main article: Albert Hubo

In November of '05, KAIST, Korea and Dallas, Texas based Hanson Robotics, Inc (HRI) released the world's first android head mounted on a life-size walking bi-pedal frame at the APEC Summit in Seoul, Korea. The walking frame was based on the KHR-3 HUBO, while the head was an exact recreation of the late physicist, Albert Einstein. The android was able to speak and cover a wide range of natural facial expressions, built upon prior HRI development on the Philip K. Dick android, which made its official debut at the Wired Magazine NextFest 05' in Chicago, Illinois.

The humanoid prototype was officially dubbed "Albert Einstein Hubo".

Jaemi HUBO / HUBO 2

Jaemi HUBO was developed from 2008 to 2009. The complete humanoid robot was given a slimmer design with an aluminum endoskeleton and a polycarbonate frame, resulting in a slightly taller height but a 20% lighter weight than its predecessors. Its movements were more realistic since the arms made quicker and more natural motions, and the legs could stretch to imitate human walking, which also consumes less energy than the traditional humanoid walking based on the Zero Moment Point trajectory. Its walking speed was improved to 1.5 km/h, and it also acquired the ability to run at 3.0 km/h (which is still much slower than the new ASIMO's 9 km/h by comparison).[1]

Specifications

KHR-0
(2001)
KHR-1
(2002)
KHR-2
(2004)
HUBO (KHR-3)
(2005)
Albert HUBO
(2005)
HUBO 2 (KHR-4)
(2008)
HUBO 2 Plus
(2011)
Weight 29 kg 48 kg 56 kg 56 kg 57 kg 45 kg[3] 43 kg
Height 110 cm 120 cm 120 cm 125 cm 137 cm 125 cm 130 cm
Walking speed - 1.0 km/h 1.2 km/h 1.25 km/h 1.25 km/h 1.5 km/h 1.5 km/h
Continuous operating time - - - 60 minutes 60 minutes 120 minutes 130 minutes
Degrees of Freedom 12 41 41 66 41 38

DARPA Robotics Challenge

A HUBO entered by TEAM KAIST was the winner of the DARPA Robotics Challenge finals on June 6, 2015.[4][5] The machine, called DRC-Hubo, is an adaptable multifunctional device with the ability to transform from a walking robot to rolling on 4 wheels by bending and using wheels incorporated into its knees. One of the tasks was to climb stairs, which the DRC-Hubo was able to do by transforming into its walking posture.[6]

See also

References

  1. 1 2 3 "HUBO." Citizendium. 18 February 2011. Web. 21 February 2011. <http://en.citizendium.org/wiki/HUBO>.
  2. "Korea Shows Its Robotics Prowess with a Rival for Asimo - Image 4 of 6." Gizmag. 25 January 2005. Web. 21 February 2011. <http://www.gizmag.com/go/3638/picture/8042/>.
  3. http://hubolab.kaist.ac.kr/hubo%28khr-4%29_Specification.php
  4. John Markoff (June 6, 2015). "Korean Robot Makers Walk Off With $2 Million Prize". The New York Times. Retrieved June 7, 2015.
  5. "DRC FINALS TEAM STANDINGS". theroboticschallenge.org. DARPA. Retrieved June 7, 2015.
  6. Will Knight (June 5, 2015). "A Transformer Wins DARPA's Robotics Challenge A robot capable of rolling on four wheels or walking on two legs shows the value of adaptability during the DARPA's robot event.". MIT Technology Review. Retrieved June 8, 2015. claimed first place on Saturday afternoon by rising awkwardly from four wheels, and ascending several metal stairs with a series of slow, halting steps.
Wikimedia Commons has media related to Robots of Hubo Labs.
This article is issued from Wikipedia - version of the 11/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.