Guard rails (railroad)

This article is about railway infrastructure. For highway infrastructure, see Guard rail.
Guard rails at Dieu Tri station, Vietnam.

In railroad use, guard rails or check rails are placed parallel to regular running rail along areas of restrictive clearance, such as a bridge, trestle, or tunnel. These have the effect of keeping the wheels of rolling stock in alignment in case of derailment. It also helps to minimize damage to the structure and allow easier post-accident cleanup.

History

Although there has always been some form of guard rails as long as there have been trains, the precursor of the guard rails we have today were invented in Laconia, New Hampshire by Gorham B. Ames in 1894.[1]

Sharp curves

On sharp curves, guard rails may be placed inside the inner rail, where they engage the back of the flange of the wheel on that side.[2]

References

  1. ↑ "U.S. patent". Retrieved Feb 9, 2014.
  2. ↑ "MILDURA TRAIN DERAILMENT.". The Argus (Melbourne, Vic. : 1848 - 1956). Melbourne, Vic.: National Library of Australia. 27 August 1928. p. 16. Retrieved 5 August 2011.


This article is issued from Wikipedia - version of the 10/27/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.