Gladiator Tactical Unmanned Ground Vehicle

Gladiator TUGV
Type Unmanned robotic system
Specifications
Weight 725.75 kg (1,600.0 lb)
Length 1.78 m (5.8 ft)
Width 1.12 m (3.7 ft)
Height 1.35 m (4.4 ft)
Crew 0 (Remotely operated)

Armor [unknown]
Main
armament
M249 Squad Automatic Weapon, M240G Medium Machine Gun, 9 mm Uzi, Anti-Personnel/Obstacle Breaching System (APOBS), and Light Vehicle Obscuration Smoke System (LVOSS)

The Gladiator Tactical Unmanned Ground Vehicle (TUGV) program was developed in order to support the United States Marine Corps conduct of Ship To Object Maneuver (STOM) missions through the use of a medium-sized, robotic system to minimize risks and eliminate threats to Marines during conflict. The Gladiator is able to perform surveillance, reconnaissance, assault and breaching missions within its basic technical configuration.

Essential functions

Development

The Gladiator Program is a U. S. Marine Corps initiative based on the Joint Army-Marine Corps Tactical Unmanned Vehicle (TUV) ORD originated by the Infantry School. MNS INT 12.1.1 dated 4 November 1993 validated the need for a tactical unmanned ground vehicle system and the Army approved the ORD in August 1995 and by the Marine Corps in May 1996. Existing unmanned vehicles contained several deficiencies which caused both Army and Marine Corps developers to reevaluate design aspects. Developments of the Gladiator allow it to support dismounted infantry and aid in scout/surveillance, direct engagement, and obstacle breeching missions.

The Marine Corp began development of the Gladiator by developing a Concept Validation Model (CVM) vehicle. The original concept for Gladiator was a vehicle that could provide reconnaissance, obscurant, and APOBS capabilities to the front line Marines. The original vehicle size was set so that two Gladiators would be able to fit into the back of a HMMWV. The first version of Gladiator was developed by a team of Government Contract Companies located in the Huntsville, Alabama area but it was soon found that the requirement for two TUGVs to fit into a HMMWV made the original Gladiator CVM design top heavy and impractical.

The Marine Corp changed the size requirement to one vehicle to fit into a HMMWV and move development in 2002 to the Unmanned Ground Vehicles Technology Development group, headed by Robert Wade, at the Software Engineering Directorate located on Redstone Arsenal in Huntsville, Alabama. The GVTD team was lead and mechanical engineer was Keith Foslien (Government), the systems and software engineer was Brad Troyer (SAIC), the electrical engineer was Bill Brown, fabrication was Vince Davis and Mark Schulke.

There were three Gladiator CVMs developed for the Marine Corp, the first was a diesel powered tracked vehicle (shown above) while the other two were 6 wheeled hybrid electric vehicles. The original tracked CVM has a reconnaissance and weapon head, which was quickly combined in to one head that could provide both functions. The capability of the vehicles increased over the three year CVM program. The vehicles were able to support direct fire using the M240 & M248 machine guns, UZI 9mm machine gun, and the FN303 less lethal weapon. They possessed night vision capabilities and could also geolocate a target and provide a firing solution to the operator for indirect engagement of the target. The Gladiator CVM was the first safe and successful weaponized TUGV in the world.

The Gladiator CVMs were used to develop and judge TUGV capabilities, requirements, and TTPs. With the input from the CVM program, an RFP for Gladiator production went out to industry. Upon the approval of the new design on February 7, 2005, Carnegie Mellon University's National Robotics Engineering Consortium and United Defense Industries was awarded a contract for over $26 million for the System Development and Demonstration (SDD) phase of the Gladiator. In 2007 six pre-production models were manufactured and the next step was to produce several hundred in production. US Marines elected not to go to production with the units. These six prototypes were sent to the Army and later five of the six were placed into a CRADA between the Army and Cybernet Systems Corporation. Two of these units were refitted to full autonomous operations under a contract to develop the Unit-to-Unit Autonomous Resupply Vehicle (U2UARV). The among other changes to the Gladiator, the weapons platforms were removed and replaced with interfaces to carry JMIC pallets (Joint Modular Intermodal Containers).

Purpose

The Gladiator was designed with the intent to be easily transported to different parts of the battlefield. Rated for many types of environments, the Gladiator was to enhance the ability of Marines to accomplish assigned mission tasks. The purpose of the Gladiator was to be teleoperated just forward of the Marine units, performing basic scouting/surveillance, obstacle breaching, and reconnaissance tasks while permitting the operator to remain out of the line of danger.

The Gladiator TUGV is a robust, compact, unmanned, tele-operated, multi-purpose ground reconnaissance, surveillance, and target acquisition (RSTA) vehicle system possessing a scouting and direct engagement capability. It provides the armed forces with remote reconnaissance, surveillance, and target acquisition, nuclear, biological and chemical reconnaissance, obstacle breaching, and direct fire capability to neutralize threats and reduce risk to the warfighter. After refitting it for cargo carrying and autonomous operations over terrain and roads, it also provides small unit resupply features. The TUGV system can be utilized by infantry battalions and combat engineer companies. It small enough to be strategically, operationally, and tactically deployable worldwide for ground, aircraft and sea transport missions

Configuration

The Gladiator is configured such that it can be considered a Mobile Base Unit, able to carry extra ammunition or other payload while at the same time maintaining the above-mentioned capabilities. Due to its unmanned nature, each Gladiator is equipped with a remote control unit capable of displaying mission data, operational status and mission surveillance. The exchange between the Gladiator and the remote control unit is expected to be transmitted through a non-tethered military link.

Status

As of June 2004 the TUGV was classified as "under development." By 2014 it still carries that status.

See also

References

    This article is issued from Wikipedia - version of the 9/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.