Gas–liquid contactor

A gas–liquid contactor is a particular chemical equipment used to realize the mass and heat transfer between a gas phase and a liquid phase. Gas–liquid contactors can be used in separation processes (e.g. distillation, absorption) or as gas–liquid reactors or to achieve both purposes within the same device (e.g. reactive distillation).

Typologies

They are divided into two main categories:[1]

Examples of differential gas–liquid contactors are:

Examples of stagewise gas–liquid contactors are:

Pro and cons

Some important factors to take into account to choice the typology of gas–liquid contactor more suitable for a particular application are:

In particular heat and mass transfer velocity is higher for equipment with higher values of gas–liquid interface surface area, so gas–liquid contactors with high surface area (e.g. packed column, spray tower) are often preferred when it is important to lower the cost of the equipment.

Liquid hold-up is also an important factor for the economy of the process, because for low values of liquid hold-up a bigger equipment is needed to have the same heat and mass transfer velocity. For this reason, gas–liquid contactors with low liquid-hold-up (e.g. falling-film column) in general are not used at industrial scale.

Notes

  1. 1 2 3 (Ghosal 2011, pp. 253–257)

Bibliography

This article is issued from Wikipedia - version of the 11/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.