Garfield Thomas Water Tunnel

Garfield Thomas Water Tunnel
Garfield Thomas Water Tunnel, March 2014
General information
Status Complete
Type Educational, R&D
Location University Park, Pennsylvania
Address North Atherton Street, University Park, PA, 16801
Coordinates 40°47′35″N 77°52′06″W / 40.793054°N 77.86822°W / 40.793054; -77.86822
Construction started 1948
Completed October 7, 1949[1]
Opened March, 1950[1]
Renovated 1992
Client ARL, U.S. Navy
Owner Penn State's Applied Research Laboratory
Website
ARL Homepage

The Garfield Thomas Water Tunnel is the U.S. Navy's principal experimental hydrodynamic research facility and is operated by the Penn State Applied Research Laboratory.[2] The facility was completed and entered operation in 1949.[2] The facility is named after Lieutenant W. Garfield Thomas, Jr., a Penn State journalism graduate who was killed in World War II. For a long time, the Garfield Thomas Water Tunnel was the largest circulating water tunnel in the world.[1] It has been declared a historic mechanical engineering landmark by the American Society of Mechanical Engineers.[3]

Today, in addition to many of its Navy projects, the facility tunnel-based research has expanded into pumps for the Space Shuttle, advanced propulsors for ships, heating and cooling systems, artificial heart valves, vacuum cleaner fans, and other pumps and propulsors related products.[4][5]

History

After the end of WW II, the US military started investing heavily in higher education nationwide. At the same time, Harvard terminated its Underwater Sound Laboratory (USL) which invented the first acoustical homing torpedo (FIDO);[1] consequently Penn State hired Eric Walker, USL's assistant director to head its electrical engineering department, and the Navy transferred USL's torpedo division to Penn State - where it became to be the Ordnance Research Laboratory (ORL).[6] The ORL eventually became the Applied Research Laboratory.

The Garfield Thomas Water Tunnel was built at Penn State in cooperation with ORL by the ARL for further torpedo research. Construction completed on October 7, 1949, and began operating six months later.[1] Since then, the facility has expanded into viscosity, sound, wave, and wind research.

In 1992, the facility underwent a complete overhaul.[4]

Capabilities

The main water tunnel can be seen from the outside through the glass windows.

The facility consists of a number of closed circuit, closed jet and open jet facilities.[7]

Water Tunnels

The facility operates four water tunnels.[8]

Garfield Thomas Water Tunnel

The Garfield Thomas Water Tunnel is the facility's largest water tunnel.[7] The 100 feet long,[5] 32 feet high,[5] 100,000[1] gallons tunnel is a closed-circuit, closed-jet. The system is powered by 1,491 kW (2,000-hp) pump, with a 4-blade adjustable pitch impeller and can produce a maximum water velocity of 18.29 m/s (40.91 mph). The system is capable of producing pressures between 413.7 and 20.7 kPa.

The tunnel is equipped with an array of instruments including: Propeller dynamometers, Five-hole pressure probe, Pitot probes, lasers, pressure sensors, hydrophones, planar motion mechanism (PMM), force balances, accelerometers, and acoustics arrays.[7]

Smaller Water Tunnels

The facility operates two additional smaller water tunnels with diameters of 12 inches and 6 inches. Both are closed-circuit, closed-jet. The 12-incher is a 150 horsepower (111.8 kW) system capable of producing maximum water velocity of 24.38 m/s (54.53 mph). The 6-incher is a 25 hp (18.64 kW) system that can deliver a max velocity of 21.34 m/s (47.74 mph).

Both tunnels are equipped with lasers, pressure sensors, pressure transducers, and hydrophones

Ultra-High Speed Cavitation Tunnel

The facility also has a 1.5 inch closed-circuit, closed-jet cavitation tunnel capable of producing a maximum veloctiy of 83.8 m/s (187 mph). The stainless steel tunnel, 75 hp (55.9 kW) tunnel supports pressures as high as 41.4 kPa and temperatures of 16 °C to 176 °C.

Other facilities

Water tunnel main entrance.

In addition to the water tunnels, the facility operates an array of wind tunnels, glycerin tunnels, and anechoic chamber for used in many physics problems.[9] The Boundary Layer Research Facility (BLRF) operates a 12-inch turbulent pipe flow of glycerine.[8] Additionally, the facility operates a 20 hp (14.91 kW), open-jet, 1,750 rpm Axial-Flow Fan with a 36.58 m/s (81.83 mph) maximum velocity used for basic engineering research in turbomachinery blading. Another 2.75 meter diameter, 100 hp (74.6 kW) closed-circuit used specifically for research in viscous sublayer and in modeling of turbulent flow of fluids next to a wall at large scale.

See also

References

  1. 1 2 3 4 5 6 "A Closed Circuit, Closed Jet, High-speed, Water Tunnel". The American Society of Mechanical Engineers. Retrieved 25 November 2013.
  2. 1 2 "About ARL - Who and What We Are". The Pennsylvania State University. Retrieved 25 November 2013.
  3. "Garfield Thomas Water Tunnel". ASME. Retrieved 25 November 2013.
  4. 1 2 Brown, Nancy Marie. "Tunnel Tour". Penn State News. Retrieved 25 November 2013.
  5. 1 2 3 "Garfield Thomas Water Tunnel Background". Retrieved 25 November 2013.
  6. "Pennsylvania State University [Education] Historical Marker". Retrieved 25 November 2013.
  7. 1 2 3 "garfield thomas water tunnel (GTWT) facilities". Penn State Applied Research Laboratory. Retrieved 25 November 2013.
  8. 1 2 "Applied Research Laboratory The Pennsylvania State University". September 27, 1988. Retrieved 25 November 2013.
  9. "Fluids, Structural Mechanics & Acoustics (FSMA)". Applied Research Laboratory. Retrieved 25 November 2013.
Wikimedia Commons has media related to Garfield Thomas Water Tunnel.
This article is issued from Wikipedia - version of the 11/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.