Game Boy Printer

The Game Boy Printer

The Game Boy Printer, known in Japan as the Pocket Printer (ポ ケットプリンタ Poketto Purinta), is a thermal printer accessory released by Nintendo in 1998, which ceased manufacture in early 2003.[1] The Game Boy Printer is compatible with all the Game Boy systems except the Game Boy Micro, and is designed to be used in conjunction with the Game Boy Camera. It also prints images from compatible late-generation Game Boy and Game Boy Color games (listed below). It runs on six AA batteries and uses a special 3.8 cm wide thermal paper with adhesive backing, sold in white, red, yellow and blue colors. In Japan, a bright yellow Pokémon version of the Game Boy Printer was released, featuring a feed button in the style of a Poké Ball.

Mad Catz[2] sells a kit that enables users to connect a Game Boy to a PC and print images using the PC's printer. Hobbyists outside the UK can also make their own cable for uploading images to their computer.[3] A Game Boy Printer emulator is needed for the Game Boy to interface with the PC once linked via cable.[4] The Game Boy Printer Paper has also been discontinued, and rolls of the genuine article that still produce a reliable image are becoming more difficult to find.[5] Regular thermal paper, such as the kind used for POS terminals, can be cut to the proper width and used successfully with the Game Boy Printer.[6]

The system will print a test message reading "Hello" if it is turned on while the feed button is held. According to the manual, this is used to test if the printer is functioning properly. To get around using six AA batteries (1.5 volts each) for the printer, a single 9V battery can be used if wired properly, because the printer requires 9V DC.

Games with Game Boy Printer support

Game Boy Printer paper

A roll of the American Game Boy Printer paper came in red, blue, yellow and white, with an adhesive backing. It had a width of 38mm and a diameter of 30mm, with a 12mm cardboard spindle in the centre. A typical roll had 390–400 cm of length. When a picture printed from the Game Boy Camera, it would print with a .5 cm margin above and below the picture and print the picture at a 2.3 cm height. This would give the total of 3.3 cm height per picture. The Game Boy Printer paper refills boasted up to 180 pictures per roll. With the math the typical roll could only take 118 pictures. The paper is now hard to find; it could be substituted with a 1.5-inch-wide (38 mm) thermal paper without repercussions on the printer.

Pokémon Pinball has a glitch to where it will only print the RED high scores.

References

  1. ↑ http://www.ecrater.com/product.php?pid=1920497
  2. ↑ "Mad Catz GB to PC Camera Link Cable (GBC)". November 20th, 2010.
  3. ↑ "Game Boy to LPT Cable diagram". Ziegler.Desaign.de. July 17, 2009.
  4. ↑ "Game Boy Printer Emulator". July 17, 2009
  5. ↑ "Game Boy Printer Paper discussion". Flickr. July 17, 2009.
  6. ↑ Make your own Game Boy Printer Paper video tutorial on YouTube July 17, 2009.
  7. ↑
  8. ↑ Puzzled IGN review
  9. ↑ Card Hero - Game Boy Color Preview at IGN (March, 2000)
This article is issued from Wikipedia - version of the 11/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.