GE Dash 9-40C

GE Dash 9-40C

Norfolk Southern 8845
Type and origin
Power type Diesel-electric
Builder GE Transportation Systems
Model GE Dash 9-40C
Build date January–April 1995
Total produced 125
Specifications
AAR wheel arr. C-C
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Trucks GE HiAd
Wheel diameter 40 in (1,000 mm)
Wheelbase 13 ft 7 in (4.14 m)
Length 73 ft 2 in (22.30 m)
Loco weight

410,000 lb (190 t), full supplies -

(fuel oil, lube oil, sand).
Fuel capacity 4,600 US gal (17 kL)
Lubricant cap 410 US gal (1.6 kL)
Sandbox cap 40 cu ft (1.1 m3)
Prime mover GE 7FDL-16
Traction motors direct-current GE B13B
Performance figures
Maximum speed 70 mph (110 km/h)
Power output 4,000 hp (3,000 kW)
Tractive effort 109,000 lbf (480 kN) (continuous)
140,000 lbf (620 kN) (starting)
Career
Locale United States
Current owner Norfolk Southern Railway
Disposition Some (eventually all) retired and rebuilt as AC44C6M

The GE Dash 9-40C, also called a C40-9, is a 4,000-horsepower (3,000 kW) diesel locomotive that was built by GE Transportation Systems of Erie, Pennsylvania, between January 1995 and March 1995. The C40-9 is equipped with the 16-cylinder 7FDL-16 prime mover which is rated at a lower power than the 4,400 hp (3,300 kW) GE Dash 9-44CW that debuted a year earlier in 1994.[1] It features GE's direct current B13B traction motors.[1]

The C40-9 features the standard cab design and is the only model in the Dash-9 series to do so. It is essentially identical to the wide-cab C40-9W model otherwise. All units have rooftop-mounted air conditioner units which gives them their distinct "top hat" look.

Norfolk Southern Railway (NS) is the only operator of this model.[2] The company owns 125 units, numbered 8764–8888.[3] NS specifically requested the standard cab and may have purchased more units had the Federal Railroad Administration not required it to purchase the wide-cab C40-9W version instead.[1]

Upgrade

In mid 2015, NS started to upgrade its C40-9s into 4400 hp. C44-9s by upgrading the wattage to 3,281 kW, up from the as-delivered 3,000 kW. The units are being upgraded as they go in for their 184-day maintenance cycle.

Also in 2015, NS 8879 became first NS GE Dash 9-40C to be converted from DC to AC traction. The locomotive was rebuilt with a new GE wide nose and cab, and had locomotive speed limiter (LSL) and cab signals installed. These traction motor replacements are part of a Norfolk Southern / General Electric project to test the economic feasibility of converting Norfolk Southern's large (125 units), but relatively old Dash 9 fleet to AC traction. (BNSF Railway is also considering a similar upgrade program for its even bigger - originally 1797 units - C44-9W fleet). Work on the 8879 was sub-contracted out to and completed by American Motive Power, Inc. (AMP) in Dansville, NY. Two more units were soon added to the conversion program, NS C40-9 8799 and NS C40-9W 8900. Norfolk Southern's units will be called AC44C6M.

References

  1. 1 2 3 "The GE C40-9/W". American-Rails.com. Retrieved 26 January 2012.
  2. ↑ Wilson, Jeff (2009). The model railroader's guide to diesel locomotives. Waukesha, Wisconsin: Kalmbach Publishing Company. p. 82. ISBN 978-0-89024-761-7.
  3. ↑ "Norfolk Southern Motive Power". The Diesel Shop. 4 January 2011. Retrieved 26 January 2012.
This article is issued from Wikipedia - version of the 5/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.