Racing shell

Toronto rowers in a 4+ oar shell

In watercraft, a racing shell (also referred to as just a fine boat (UK) or just shell) is an extremely narrow, and often comparatively long, rowing boat specifically designed for racing or exercise. It is outfitted with long oars, outriggers to hold the oarlocks away from the boat, and sliding seats. The boat's long length and semicircular cross-section reduce drag to a minimum. This makes the boat both fast and unstable. It must be actively balanced by the rowers to avoid tipping. Being able to balance, or "set" the boat while putting maximum effort into the oars is therefore an essential skill of sport rowing.

History

The racing shell evolved from the simple working rowboat. Boats with longer hulls and narrower in beam were developed in the early 19th century specifically for team racing. These dedicated boats were the first boats that could be called racing shells, and they have since evolved into the highly specialized forms used today.

Riggers

A narrower boat provides a sharper angle to the bow and a smaller cross-sectional area reducing drag and wave drag, and avoiding hull speed limitations at race speed. The first racing shells, while narrower than working rowboats, were limited by the width necessary to mount the oarlocks on the boat's sides ("gunwales"). By attaching outriggers to the gunwales, the oarlocks could be placed farther out, two things happened: oars got much longer, providing more length to the strokes, and hulls got narrower, until they were as narrow as it was possible while still retaining sufficient buoyancy and balance.

Materials

University of Vermont 8+ oar shell

Originally made from lapstrake wood, shells are now almost always made from a composite material for strength and weight advantages. The first composite shells were made from a form of papier-mâché and became popular in the 1870s. These paper shells were sold world-wide by the Waters Paper Boat Factory of Troy, New York. Modern shells are usually made of carbon-fibre reinforced plastic in a honeycomb structure. They are manufactured by either cold laying up of the carbon, which is then left to set, or by using heat curing, which ensures that the carbon fibre composite is properly set. The best shells are characterized by their "stiffness", as the lack of flexing means none of the force exerted by the rower is wasted in twisting the boat.

Sliding seats

A rower on a fixed seat is limited in the amount of power he can apply to the oars by the strength in his upper body and the distance he can pull the oars on each stroke. After riggers were added to the shell allowing the use of longer oars, rowers took advantage by taking longer strokes and using their legs during the stroke. At first, the athletes wore trousers with wear resistant leather bottoms covered in grease and the shells had concave, longitudinal seats. The athletes could then use their legs to slide along the seat, adding the power of their legs and letting them greatly lengthen the stroke. This eventually led to the modern sliding seat, mounted on rollers, which allows nearly frictionless movement of the rower's body. The first sliding seat was developed by George Warren of Toronto, a boat builder and famous decoy maker, who at the time was coach to world rowing champion Ned Hanlen. With the advent of the sliding seat Ned was able to greatly outperform his English and American counterparts.

Sliding rigger

The same advantages may be obtained by fixing the seat and mounting the outriggers on rollers. Now the athletes body mass remains stationary and the boat doesn't pitch bow to stern nearly as much. This improves the boat speed significantly.[1] The disadvantage is that this arrangement may result in blisters on one's buttocks and in the risk of sliding off one's seat when exerting too much explosive force at the beginning of a race .[2] In April 1877 Michael Davis of Portland Maine applied for a patent for a sliding rigger/foot-board with fixed seat.[3] In 1981, the German, Peter-Michael Kolbe, won the FISA World Championship using a sliding rigger. In August 1983 FISA banned the use of the sliding-rigger, presumably because it was thought to be more costly than sliding-seat boats.[1]

Boat classification

There are a large number of different types of boats. They are classified using:

Although sculling and sweep boats are generally identical to each other (except having different riggers), they are referred to using different names:

See also

Category:Rowing equipment manufacturers

Notes

  1. 1 2 Miller, Bill (January 2000). "The Development Of Rowing Equipment". Retrieved 2011-04-26.
  2. Mallory, Peter (2010). "The Sport of Rowing" (PDF). p. 1836. Retrieved 2011-04-26.
  3. Davis, Michael (1877-04-04). "Improvement in outrigger-boats (US patent 209,960)". Retrieved 2011-04-26.

References

http://www.duckworksmagazine.com/04/s/excerpts/maib/17/index.htm, For information on the development and process of paper boat production

This article is issued from Wikipedia - version of the 3/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.