Fender Bullet

Fender Bullet

1981 USA Series 1 Fender Bullet Deluxe
Manufacturer Fender
Period 1981–1982
Construction
Body type Solid
Neck joint Bolt-on
Scale 25.5"
Woods
Neck Maple
Fretboard Rosewood or Maple
Hardware
Pickup(s) One humbucker, two humbuckers, two single coils, or three single coils
Colors available
Red/White, Cream/White, Red/Black

The Fender Bullet was an electric guitar originally designed by John Page[1] and manufactured and marketed by the Fender Musical Instruments Corporation. It was first introduced as a line of "student" guitars to replace the outgoing Mustang and Musicmaster models.[2]

USA Series 1 (1981)

Fender marketed two original models made in the U.S.A.—the Bullet Deluxe and a standard Bullet. These two models had a single cutaway body shape similar to that of the Fender Telecaster with a 21 fret rosewood neck and Telecaster-style headstock. Similarly to preceding student models like the Mustang, Bronco and Musicmaster, cost savings were made by using inexpensive hardware and parts that were quick to assemble and labour saving. The standard model originally retailed at $199.00. The Bullet Deluxe had a plastic pickguard with a separate, traditional hardtail bridge while the standard model featured a metal pickguard-bridge combo painted white or black, with separate saddles for each string. Both models had 2 single coil pickups with a three-way selector switch. The pickups the same enclosed units used on the Mustang. Series 1 Bullets were available in red (with a white or black pick guard) and ivory.

USA Series 2 (1982)

In 1982, Fender introduced a revised version of the Bullet, including two bass models. This series featured a double cutaway body similar to the Fender Stratocaster without body contouring. Headstocks retained the version one (Telecaster) profile. Five models were marketed—the Standard Bullet, Bullet Deluxe (S-2), S-3, H-1, and H-2—in addition to the two new bass models (a regular scale "B-34" and short scale "B-30"). The standard Bullet had the previous style metal pickguard-bridge combination with two single coils and three-way switch. The Deluxe (S-2) had a plastic pickguard and separate hardtail bridge with the same pickup configuration. The new S-3 had a separate plastic guard, traditional hardtail bridge, and three single coils with a five-way switch. The H-1 sported the metal pickguard-bridge combination with one humbucker. It also had a coil tapping button. The H-2 had a plastic guard, traditional hardtail bridge, and two humbuckers each with their own coil tapping button. The humbucking pickups were really two single coil pickups with alnico rod magnets side-by-side. All models in 1982 used the Fender "F" logo chrome tuners, made by Schaller in W. Germany. The basses each had plastic guards and traditional bridges. They had the old Mustang bass style pickups. They differed only in scale. The popular second version Bullets were available in standard colors of red, ivory, brown sunburst or walnut, as well as in custom colors.[1]

Fender Bullet Telecaster (1983 Transitional Model)

In mid 1983, Fender ceased production of the Bullet and Bullet Deluxe models in the USA and began production of the new Squier Bullet models in Japan. At this time the remaining inventory of USA-made Bullet necks were mated to Telecaster bodies and distributed to select dealers as the Fender Bullet Telecaster guitar. Aside from the Fender Bullet decal on the headstock, this transitional model was nearly identical to the standard production Fender Telecaster. The Fender Bullet Telecaster was available only in late 1983, with production ending when the remaining stocks of USA-made Bullet necks were used up. This was the last Bullet model to feature the Fender name prominently on the headstock, as well as the last Bullet model to be made in the USA.

Squier Bullet

1983–2007

Stamp that appears on the guitar's headstock.
All factory colors for the Squier Bullet Special. All of these examples have been modified by the owner.

From 1983 the Bullet has been manufactured in Japan and other countries and is marketed under the Squier trademark as the Squier Bullet. Humbucking pickups from the original (early 80s) consisted of the same paired single coil configuration as the American-made models but used steel rods as pole pieces with a ceramic bar magnet. The three single coil pickup pattern like the Fender Stratocaster was also available as well as tremolo and hard tail bridges. These were available in Black and Brown Sunburst.

2007–present

Squier introduced a new, Chinese-made version of the Bullet in 2007, sporting a built-in tremolo arm, rosewood fingerboard, and one of six body finishes (Pink, Arctic White, Daphne Blue, Fiesta Red, Brown Sunburst, or Black) with a single-ply white pickguard.

The Squier Bullet Special

From around 1999 to 2004, Fender produced a single pickup Squier Bullet Special guitar. It had a fixed, hardtail bridge, a dual-coil (humbucker) bridge pickup, one volume control, and a 21 fret rosewood fingerboard bolt on neck. The body was made out of plywood and it was made in six colors: Black, Ice Blue Metallic, Red Metallic, Cobalt Blue Metallic, Orange, and Satin Silver. The Red and Orange bodies were made with black hardware; all other colors had chrome hardware. All Bullet Specials had a 1 ply black pickguard. Most of the Squier Bullet Specials made in 2002 came with a special 20th Anniversary engraved neck plate. The logo on the headstock reads "Squier Bullet" with no mention of "Special". Some 2002 versions of the black and Frost Red Metallic Squier Bullet Special are known to have the Affinity brand on the headstock as well.[3]

All Squier Bullet Special guitars were made in Indonesia at the Cort factory. The serial numbers start with IC followed by two digits that designate the year the guitar was made. The remaining digits indicate month of production, color, and sequence. IC02xxxxxxx indicates a guitar made in 2002.[4]

Bullet Strings

Fender also markets guitar strings under the Bullet brand. Introduced in the early 1970s, these strings differ by having cylindrical bullet-shaped ends instead of the "ball ends" common to other manufacturers. Fender states the bullet ends create a tighter fit in the tremolo block on Stratocaster guitars, leading to greater tuning stability when the tremolo is used. [5] In the early 1990s Fender switched from using zinc-plated steel for the bullet ends to brass, improving sustain. Today nickel is also used. Stainless steel strings with bullet ends are also offered since the late '90s.

Further reading

References

  1. 1 2 Chevne, Steven and Fjestad, Zachary R. (Editor), The Blue Book of Electric Guitars, (5th Edition), 1998
  2. The Original USA Fender Bullet Appreciation Page
  3. Bacon, Tony Squier Electrics: 30 Years of Fenders Budget Guitar Brand; Backbeat,1st Edition, January 1, 2012, ISBN 978-1-61713-022-9
  4. "How to date Japanese, Mexican, USA, Korean, Chinese, Indonesian and Indian Squiers". Fender Discussion Page (forum). June 12, 2007.
  5. "Fender Bullet Strings". Fender engineers of the early 1970s were aware that the standard ball-end string design that had prevailed until then presented very specific tuning problems, especially on tremolo-equipped guitars.
Wikimedia Commons has media related to Fender Bullet.
This article is issued from Wikipedia - version of the 10/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.