Fair queuing

Fair queuing is a family of scheduling algorithms used in some process and network schedulers. The concept implies a separate data packet queue (or job queue) for each traffic flow (or for each program process) as opposed to the traditional approach with one FIFO queue for all packet flows (or for all process jobs). The purpose is to achieve fairness when a limited resource is shared, for example to avoid that flows with large packets (or processes that generate small jobs) achieve more throughput (or CPU time) than other flows (or processes).

Fair queuing is implemented in some advanced packet switches and routers.

History

The term "fair queuing" was coined by John Nagle in 1985 while proposing round-robin scheduling in the gateway between a local area network and the internet to reduce network disruption from badly-behaving hosts[1][2][3]

A byte-weighted version was proposed by A. Demers, S. Keshav and S. Shenker in 1989, and was based on the earlier Nagle fair queuing algorithm.[4][5] The byte-weighted fair queuing algorithm aims to mimic a bit-per-bit multiplexing by computing theoretical departure date for each packet.

The concept has been further developed into weighted fair queuing, and the more general concept of traffic shaping, where queuing priorities are dynamically controlled to achieve desired flow quality of service goals or accelerate some flows (see net neutrality).

Principle

The main idea of fair queuing is to use one queue per packet flows and service them in rotation, such that each flow "obtain an equal fraction of the resources".[1][2]

The advantage over conventional first in first out (FIFO) or static priority queuing is that a high-data-rate flow, consisting of large or many data packets, cannot take more than its fair share of the link capacity.

Fair queuing is used in routers, switches, and statistical multiplexers that forward packets from a buffer. The buffer works as a queuing system, where the data packets are stored temporarily until they are transmitted.

With a link data-rate of R, at any given time the N active data flows (the ones with non-empty queues) are serviced each with an average data rate of R/N. In a short time interval the data rate may be fluctuating around this value since the packets are delivered sequentially, depending on the scheduling used.

Fairness

Various sources disagree on what is "fair". The initial article uses round-robin scheduling of packets,[2] which is fair in the number of packets, but not on the bandwidth use when packets have different sizes. Several formal notions of fairness measure have been be defined further, like max-min fairness, "worst case fairness",[6] "Fairness Index",[7] etc.

Generalisation to weighted sharing

The initial idea gives to each flow the same rate. A natural extension consists in letting the user specify the part of bandwidth allocated to each flow: this led to Weighted fair queuing and Generalized processor sharing.

A byte-weighted fair queuing algorithm

This algorithm attempts to emulate the fairness of bitwise round-robin sharing of link resources among competing flows. Packet-based flows, however, must be transmitted packetwise and in sequence. Fair queuing selects transmission order for the packets by modeling the finish time for each packet as if they could be transmitted bitwise round robin. The packet with the earliest finish time according to this modeling is the next selected for transmission.

The complexity of the algorithm is O(log(n)), where n is the number of queues/flows.

Algorithm details

Modeling of actual finish time, while feasible, is computationally intensive. The model needs to be substantially recomputed every time a packet is selected for transmission and every time a new packet arrives into any queue.

To reduce computational load, the concept of virtual time is introduced. Finish time for each packet is computed on this alternate monotonically increasing virtual timescale. While virtual time does not accurately model the time packets complete their transmissions, it does accurately model the order in which the transmissions must occur to meet the objectives of the full-featured model. Using virtual time, it is unnecessary to recompute the finish time for previously queued packets. Although the finish time, in absolute terms, for existing packets is potentially affected by new arrivals, finish time on the virtual time line is unchanged - the virtual time line warps with respect to real time to accommodate any new transmission.

The virtual finish time for a newly queued packet is given by the sum of the virtual start time plus the packet's size. The virtual start time is the maximum between the previous virtual finish time of the same queue and the current instant.

With a virtual finishing time of all candidate packets (i.e., the packets at the head of all non-empty flow queues) computed, fair queuing compares the virtual finishing time and selects the minimum one. The packet with the minimum virtual finishing time is transmitted.

Pseudo code

Shared variables
   const N             // Nb of queues 
   queues[1..N]        // queues
   lastVirFinish[1..N] // last virtual finish instant
receive(packet)
    queueNum = chooseQueue(packet)
    queues[queueNum].enqueue(packet)
    updateTime(packet, queueNum)
updateTime(packet, queueNum)
   // virStart is the virtual start of service
   virStart = max( now(), lastVirFinish[queueNum] )
   packet.virFinish = packet.size + virStart
   lastVirFinish[queueNum] = packet.virFinish
send()
    queueNum = selectQueue()
    packet = queues[queueNum].dequeue()
    return packet
selectQueue()
    it = 1
    minVirFinish = 
    while (it <= N) do
      queue = queues[it]
      if( not queue.empty and queue.head.virFinish < minVirFinish )
        minVirFinish = queue.head.virFinish
        queueNum = it 
      it = it + 1
    return queueNum

The function receive() is executed each time a packet is received, and send() is executed each time a packet to send must be selected, i.e. when the link is idle and the queues are not empty. This pseudo-code assumes there is a system function, now(), returning the current time, and a function chooseQueue() that select the queue to put the packet.

The function selectQueue() selects the queue with the minimal virtual finish time. For the sake of readability, the pseudo-code presented here does a linear search. But maintaining a sorted list can be implemented in logarithmic time, leading to a O(log(n)) complexity, but with more complex code.

See also

References

  1. 1 2 John Nagle: "On packet switches with infinite storage," RFC 970, IETF, December 1985.
  2. 1 2 3 Nagle, J. B. (1987). "On Packet Switches with Infinite Storage". IEEE Transactions on Communications. 35 (4): 435. doi:10.1109/TCOM.1987.1096782.
  3. Phillip Gross (January 1986), Proceedings of the 16-17 January 1986 DARPA Gateway Algorithms and Data Structures Task Force (PDF), IETF, pp. 5, 98, retrieved 2015-03-04. Nagle presented his "fair queuing" scheme, in which gateways maintain separate queues for each sending host. In this way, hosts with pathological implementations can not usurp more than their fair share of the gateway’s resources. This invoked spirited and interested discussion.
  4. Demers, Alan; Keshav, Srinivasan; Shenker, Scott (1989). "Analysis and simulation of a fair queueing algorithm". ACM SIGCOMM Computer Communication Review. 19 (4): 1–12. doi:10.1145/75247.75248.
  5. Demers, Alan; Keshav, Srinivasan; Shenker, Scott (1990). "Analysis and Simulation of a Fair Queueing Algorithm" (PDF). Internetworking: Research and Experience. 1: 3–26.
  6. Bennett, J. C. R.; Hui Zhang (1996). "WF/sup 2/Q: Worst-case fair weighted fair queueing". Proceedings of IEEE INFOCOM '96. Conference on Computer Communications. 1. p. 120. doi:10.1109/INFCOM.1996.497885. ISBN 0-8186-7293-5.
  7. Ito, Y.; Tasaka, S.; Ishibashi, Y. (2002). "Variably weighted round robin queueing for core IP routers". Conference Proceedings of the IEEE International Performance, Computing, and Communications Conference (Cat. No.02CH37326). p. 159. doi:10.1109/IPCCC.2002.995147. ISBN 0-7803-7371-5.
This article is issued from Wikipedia - version of the 5/13/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.