FNAB-43

FNAB-43
Type Submachine Gun
Place of origin Italian Social Republic
Service history
In service 1944
Used by Italian Social Republic
Italian Resistance
Nazi Germany
Wars World War II
Production history
Designed 1943-44
Manufacturer Fabbrica Nazionale d'Armi di Brescia
Produced 1944 – 1945
Number built 7,000
Specifications
Weight 3.9 kg (8 Pounds 12 ounces)
Length 790 mm (31.15 in)
Barrel length 198 mm (7.80 in)

Cartridge 9×19mm Parabellum
Caliber 9 mm
Action Lever-delayed blowback, selective fire
Rate of fire 400 Rounds Per Minute
Muzzle velocity 381 m/s (1250 ft/s)
Feed system 20 or 40 round detachable box magazine
Sights Iron

The FNAB-43 is an Italian designed and developed submachinegun manufactured from 1943 to 1944. The first prototype was built in 1942 and the 7,000 built by the FNA-B (Fabbrica Nazionale d'Armi di Brescia, "Brescia National Arms Factory", hence the name) were issued to German and Italian RSI (Repubblica di Salò) units fighting in Northern Italy. The FNAB-43 was an expensive weapon to manufacture as it used extensive milling and precision engineering in its manufacture.

Description

External image
FNAB-43

The FNAB-43 uses a lever-delayed blowback system firing from the closed bolt position. The bolt is a two-piece unit with a pivoted lever interposed between bolt head and body. On firing the bolt head retracts and begins to rotate the lever, the base of which is against a lug in the body. This lever is pivoted to delay the opening movement to allow the bullet to leave the barrel. The breech pressure then drops before the lever has completed its rotation. The movement of the lever then presses the free end against the bolt body and accelerates the bolt's movement to the rear. The base of the lever then pulls clear of the lug and the whole bolt unit continues to recoil as one piece. On returning, the lever again engages the lug and pivots forward and in doing so removes a coupling which allows the firing pin to move only when the bolt is fully forward. This unusual and complicated system allows the rate of fire to be kept down to very practical 400 rpms without having to use a heavy bolt or strong spring.[1]

The FNAB-43 also uses a muzzle brake and compensator built into the barrel casing similar to some Russian weapons, and the magazine housing is hinged so that the magazine can lie beneath the barrel similarly to the French MAT-49. The single metal bar stock can be folded upwards rendering the weapon more compact.

Notes

References

External links

This article is issued from Wikipedia - version of the 11/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.