Electron rest mass

Values of me Units
9.10938356(11)×10−31 kg
5.485799090(16)×10−4 u
8.18710565(10)×10−14 J/c2
0.5109989461(13) MeV/c2
Values of the energy of me Units
8.18710565(10)×10−14 J
0.5109989461(13) MeV

The electron rest mass (symbol: me) is the mass of a stationary electron. It is one of the fundamental constants of physics and is also very important in chemistry because of its relation to the Avogadro constant. It has a value of about 9.11×10−31 kilograms or about 5.486×10−4 atomic mass units, equivalent to an energy of about 8.19×10−14 joules or about 0.511 megaelectronvolts.[1]

Terminology

The term "rest mass" + kinetic energy comes from the need to take account of the effects of special relativity on the apparent (or "observed") mass of an electron. It is impossible to "weigh" a stationary electron, and so all practical measurements must be carried out on moving electrons. The same is true with any other sub-atomic particle. For particles like photons or gluons the situation is even more problematic since the very concept of a stationary or "at rest" massless particle lacks meaning.

Determination

The electron rest mass in kilograms is calculated from the definition of the Rydberg constant R:

where α is the fine structure constant and h is the Planck constant.[1] The relative uncertainty, 5×108 in the 2006 CODATA recommended value,[2] is due entirely to the uncertainty in the value of the Planck constant.

The electron relative atomic mass can be measured directly in a Penning trap. It can also be inferred from the spectra of antiprotonic helium atoms (helium atoms where one of the electrons has been replaced by an antiproton) or from measurements of the electron g-factor in the hydrogenic ions 12C5+ or 16O7+. The 2006 CODATA recommended value has a relative uncertainty of 4.2×1010.[1]

The electron relative atomic mass is an adjusted parameter in the CODATA set of fundamental physical constants, while the electron rest mass in kilograms is calculated from the values of the Planck constant, the fine structure constant and the Rydberg constant.[1] The correlation between the two values is negligible (r = 0.0003).[2]

Relationship to other physical constants

As mentioned above, the electron mass is used to calculate the Avogadro constant NA:

Hence it is also related to the atomic mass constant mu:

where Mu is molar mass constant (defined in SI) and Ar(e) is a directly measured quantity, the relative mass of electron.

Note that mu is defined in terms of Ar(e), and not the other way round, and so the name "electron mass in atomic mass units" for Ar(e) involves a circular definition (at least in terms of practical measurements).

The electron relative atomic mass also enters into the calculation of all other relative atomic masses. By convention, relative atomic masses are quoted for neutral atoms, but the actual measurements are made on positive ions, either in a mass spectrometer or a Penning trap. Hence the mass of the electrons must be added back on to the measured values before tabulation. A correction must also be made for the mass equivalent of the binding energy Eb. Taking the simplest case of complete ionization of all electrons, for a nuclide X of atomic number Z,[1]

As relative atomic masses are measured as ratios of masses, the corrections must be applied to both ions: fortunately, the uncertainties in the corrections are negligible, as illustrated below for hydrogen 1 and oxygen 16.

  1H 16O
relative atomic mass of the XZ+ ion 1.00727646677(10) 15.99052817445(18)
relative atomic mass of the Z electrons 0.00054857990943(23) 0.0043886392754(18)
correction for the binding energy 0.0000000145985 0.0000021941559
relative atomic mass of the neutral atom 1.00782503207(10) 15.99491461957(18)

The principle can be shown by the determination of the electron relative atomic mass by Farnham et al. at the University of Washington (1995).[3] It involves the measurement of the frequencies of the cyclotron radiation emitted by electrons and by 12C6+ ions in a Penning trap. The ratio of the two frequencies is equal to six times the inverse ratio of the masses of the two particles (the heavier the particle, the lower the frequency of the cyclotron radiation; the higher the charge on the particle, the higher the frequency):

As the relative atomic mass of 12C6+ ions is very nearly 12, the ratio of frequencies can be used to calculate a first approximation to Ar(e), 5.4863037178×104. This approximate value is then used to calculate a first approximation to Ar(12C6+), knowing that Eb(12C)/muc2 (from the sum of the six ionization energies of carbon) is 1.1058674×106: Ar(12C6+) 11.9967087236367. This value is then used to calculate a new approximation to Ar(e), and the process repeated until the values no longer vary (given the relative uncertainty of the measurement, 2.1×109): this happens by the fourth cycle of iterations for these results, giving Ar(e) = 5.485799111(12)×104 for these data.

References

  1. 1 2 3 4 5 Template:CODATA2014
  2. 1 2 The NIST reference on Constants, Units, and Uncertainty, National Institute of Standards and Technology
  3. Farnham, D. L.; Van Dyck, Jr., R. S.; Schwinberg, P. B. (1995), "Determination of the Electron's Atomic Mass and the Proton/Electron Mass Ratio via Penning Trap Mass Spectroscopy", Phys. Rev. Lett., 75 (20): 3598–3601, Bibcode:1995PhRvL..75.3598F, doi:10.1103/PhysRevLett.75.3598
This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.