Diethyl ether peroxide

Diethyl ether hydroperoxide
Identifiers
18321-53-4 YesY
3D model (Jmol) Interactive image
Interactive image
ChemSpider 19985446 YesY
Properties
C4H10O3
Molar mass 106.12 g/mol
Density 1.005 g/cm3
Boiling point 62 to 64 °C (144 to 147 °F; 335 to 337 K) at 18.7 hPa (reduced pressure)
Hazards
Main hazards Explosive
NFPA 704
Flammability code 4: Will rapidly or completely vaporize at normal atmospheric pressure and temperature, or is readily dispersed in air and will burn readily. Flash point below 23 °C (73 °F). E.g., propane Health code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g., chloroform Reactivity code 4: Readily capable of detonation or explosive decomposition at normal temperatures and pressures. E.g., nitroglycerin Special hazards (white): no codeNFPA 704 four-colored diamond
4
2
4
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Diethyl ether peroxides are a class of organic peroxides that slowly form in diethyl ether upon storage under air, light, or in the presence of metal by autoxidation.

Diethyl ether hydroperoxide

Diethyl ether hydroperoxide (CH3-CH2-O-CH(OOH)-CH3) is a colorless liquid of low viscosity with a pleasant smell. Upon heating it weakly deflagrates, resulting in a fog of acetic acid and water. Diethyl ether hydroperoxide decomposes in the presence of sodium hydroxide and Fe2+-containing salts.

Diethyl ether peroxide, also known as ethylidene peroxide, (-CH(CH3)OO-)n is a polymerization product of diethyl ether hydroperoxide. It is a colorless oily liquid that is an extremely brisant and friction sensitive explosive material. Amounts of less than 5 milligrams can damage chemical apparatuses. The dangerous properties of ether peroxides are the reason that diethyl ether and other peroxide forming ethers like tetrahydrofuran (THF) or ethylene glycol dimethyl ether (1,2-dimethoxyethane) are avoided in industrial processes.

Tests

Diethyl ether peroxides can be detected with a potassium iodide (KI) solution in acetic acid or potassium iodide / starch paper. A positive test results in the formation of iodine (I2) that causes a yellow or brown color of the ether phase or a dark bluish spot on the paper strip.[1]

Degradation

Ether peroxides can be destroyed by disproportionation to acetaldehyde with Fe2+ or Mn2+ ions or with triphenylphosphine (PPh3). The resulting aldehyde has to be removed to prevent a rapid back-formation of peroxides.

References

  1. ↑ "Peroxide Forming Solvents". Sigma-Aldrich. Retrieved 2014-07-09.
This article is issued from Wikipedia - version of the 11/24/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.