Dell DRAC

The Dell Remote Access Controller or DRAC is an out-of-band management platform on certain Dell servers. The platform may be provided on a separate expansion card, or integrated into the main board; when integrated, the platform is referred to as iDRAC.

It uses mostly separate resources to the main server resources, and provides a browser-based or command-line interface (or both) for managing and monitoring the server hardware.

Features

The controller has its own processor, memory, network connection, and access to the system bus. Key features include power management, virtual media access and remote console capabilities, all available through a supported web browser or command-line interface. This gives system administrators the ability to configure a machine as if they were sitting at the local console (terminal).

The DRAC interfaces with baseboard management controller (BMC) chips, and is based on the Intelligent Platform Management Interface (IPMI) 2.0 standard, which allows use of IPMI out-of-band interfaces such as IPMI Over LAN.[1]

Versions

The Dell Remote Access Controllers (DRAC) and the Integrated Dell Remote Access Controllers (iDRAC) come in different versions, where a new (i)DRAC version is often linked to a new generation of Poweredge servers.

The hardware part is now often integrated on the motherboard of the server, and the combined product is termed iDRAC, where the "i" is for integrated. With iDRAC Express the software / hardware is piggy-backed onto one of the server's on-board network interfaces using a unique IP address. When the alternative iDRAC Enterprise version is used, it includes its own dedicated network interface.

iDRAC version 7 was introduced in conjunction with the release of Dell PowerEdge generation 12 servers in March 2012, and is only available on 12th generation models.[2] Unlike previous versions the functionality of iDRAC 7 is the same for rack, tower and blade-servers.

An overview of the different versions:[3]

Type Family Year Server Comments
DRAC II[4] 2 1999 N/A Extra card
DRAC III[5] 3 2002
DRAC iV[6] 4 2005 Generation 8
DRAC 5[7] 5 2006 Generation 9 Extra card, virtual console requires Firefox 1.5
iDRAC 6 embedded 6 2008 First version for blade servers Integrated on motherboard on all servers
iDRAC 6 Express 6 2008 Standard on all midrange systems
iDRAC 6 Express 6 2008 Blade servers[8]
iDRAC 6 Enterprise[9] 6 2008 Additional software features in combination with express; vFlash SD card slot
iDRAC 6 Enterprise[10] 6 2008 Blade Additional software features in combination with express
iDRAC 7[2] 7 2012 Generation 12 New licensing model, hardware based, NTP support
iDRAC 8[11] 8 2014 Generation 13 Quick sync, NFC configuration, UEFI secure boot

Power management

With the DRAC enabled and using its own separate network connection, a user may login and reboot the system even if the core operating system has crashed. If the operating system has loaded the correct drivers, the DRAC will attempt to shut down the system gracefully. Without this feature and with the system running, administrators can use the remote console to access the operating system too.

Remote console

The remote console features of the DRAC allow an administrator to interface with the computer as if sitting in front of it, and one can share the local inputs from keyboard and mouse as well as video output (DRAC does not support remote sound). Remote-console capability relies on an Active X or Java plug-in (depending on the model), which displays a window showing the video output on the local terminal and which takes mouse and keyboard input. This behavior closely resembles that of other remote access solutions such as VNC or RDP but also works if the operating system of the server doesn't work any more (unlike VNC or RDP). It is used to take the server console remotely.

Virtual media

The DRAC enables a user to mount remotely shared disk-images as if they were connected to the system. In combination with the remote console, this gives administrators the ability to completely re-install an operating system, a task which traditionally required local console access to the physical machine. Administrators can control virtual media through the browser or through the OpenManage tools provided by Dell, though specific versions of browsers restrict some functionality.[12]

Access

The main DRAC management takes place via a web interface. All generations of the DRAC use the default user name root and the default password calvin. Starting with the DRAC 3, Microsoft Active Directory can also provide authentication either with Dell AD Schema Extensions or Standard Schema.[13][14][15][16][17]

Implementation

The DRAC5 and iDRAC6 and higher are embedded platforms running Linux and Busybox. The firmware source code is available on the Dell website[18] however it is not possible to compile the source into a replacement firmware as Dell does not include a build environment.[19]

The DRAC provides remote access to the system console (keyboard and screen) allowing the system BIOS to be accessed over the Internet when the server is rebooted. This is done by configuring the system BIOS to send its output to a serial port (as a stream of text using VT100-compatible control codes.) The chosen serial port is then redirected to the DRAC's serial port. Users can then log in to the DRAC via SSH and run a command to connect the SSH session to the serial port, thus allowing the console to be accessed over the Internet.

Earlier versions of the DRAC used ActiveX in Internet Explorer to provide a remote-console interface in a web browser, however this was unpopular with non-Windows users who did not have access to Internet Explorer. The latest revision of the DRAC6 uses a Java application instead (launched from within the browser), however both the DRAC5 and iDRAC6 also provided the aforementioned platform-independent SSH access.

iDRAC6

iDRAC6 is available in two levels: iDRAC6 Express and iDRAC6 Enterprise. iDRAC6 Express (which integrates a host of features previously charged for in DRAC5) is now a standard offering on Dell’s enterprise-class servers. Certain features are not available for the Express version, including the Remote Console functionality and the vFlash SD card slot. As with iDRAC, iDRAC6 Enterprise is a standard offering on blade servers

iDRAC7

For the Generation 12 servers, introduced in March 2012, Dell released the iDRAC 7. iDRAC 7 won't work on earlier generation servers although some of the new functions introduced with iDRAC 7 will also be offered in new software-releases for iDRAC 6.[8][9]

On 6 March 2012, software version 1.00.00 for the iDRAC7 was released to the public. As of March 2016, the current version is 2.30.30.30.[20]

With the introduction of iDRAC 7 the licensing model has changed. iDRAC 7 now supports Lifecycle Controller. Some features of Lifecycle controller are licensed and to access those features via iDRAC the correct licenses for those functions need to be enabled.

Supported hardware platforms

iDRAC 7 runs on Generation 12 servers. Per introduction in March 2012 the following servers are using iDRAC7:[2]

Supported operating systems

iDRAC 7 is supported by the following operating systems

Supported Web browsers

The GUI for iDRAC7 uses a Web browser and Java. Internet Explorer 7, 8 and 9, as well as Firefox 6 + 7 have been tested for different operating systems.[2]

Limitations

To take advantage of storage greater than 256 MB on the iDRAC6 enterprise, Dell requires that a vFlash SD card be procured through Dell channels. As of December 2011, Dell vFlash SD cards differ from consumer SD cards by being over-provisioned by 100% for increased write endurance and performance.[21]

While there are no other known functional differences between a Dell-branded vFlash SD card and a class 2 or greater SDHC card, the use of non-Dell media prevents the use of extended capacities and functions.

On a Linux client system the standard arrow and print screen keys cannot be used in the iDRAC6 Java virtual console application because of some incompatible key event IDs,[22] however the arrow keys on the numeric keypad can still be used.

Some combinations of DRAC firmware, web browser, and Java runtime do not support virtual media via the Java applet or the plugin in DRAC5 and iDRAC6.

References

  1. ↑ "Exploring the DRAC 5" (PDF). Dell Power Solutions, August 2006. Dell. p. 27.
  2. 1 2 3 4 Dell manuals for iDRAC 7, version 1.0, 6 March 2012, visited 7 March 2012
  3. ↑ Dell support website Dell Remote Access Controllers manuals, visited 7 March 2012
  4. ↑ Manual for the Dell Open Manage Remote Assistant Card II, 14 December 1999. Visited 7 March 2012
  5. ↑ Dell support website DRAC 3 manuals, visited 7 March 2012
  6. ↑ Dell manuals for DRAC 4, 9 August 2004, Visited 7 March 2012
  7. ↑ Dell manuals for DRAC 5, 7 June 2006, Visited 7 March 2012
  8. 1 2 Dell manuals for iDRAC 6 for blade servers, visited 7 March 2012
  9. 1 2 Manual for iDRAC 6 for monolithic servers, visited 7 March 2012
  10. ↑ Manual for IDrac 6 for blade servers, visited 7 March 2012
  11. ↑ Dell manual for iDRAC 8, version 1.0, September 2014, visited 22 April 2015
  12. ↑ "Supported Web Browsers". Users Guide. Dell.
  13. ↑ "Accessing the DRAC 5 Through a Network". Users Guide. Dell.
  14. ↑ "Accessing the DRAC 4 Through a Network". Users Guide. Dell.
  15. ↑ "Accessing the DRAC III Web-Based Interface". Users Guide. Dell.
  16. ↑ "Accessing the CMC Through a Network". Users Guide. Dell.
  17. ↑ "iDRAC, Configuring Networking Using the CMC Web Interface". Users Guide. Dell.
  18. ↑ Dell Open Source repository
  19. ↑ Post on Dell Linux-PowerEdge mailing list, Dec 2010
  20. ↑ http://en.community.dell.com/techcenter/systems-management/w/wiki/3204
  21. ↑ Dell’s vFlash SDFlash Media Card – Better Endurance & Performance via Over-Provisioning
  22. ↑ Post on Dell Linux-PowerEdge mailing list, Jun 2011

External links

This article is issued from Wikipedia - version of the 10/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.