Curing of tobacco

It is necessary to cure tobacco after harvesting and before it can be consumed.[1] Tobacco curing is also known as color curing, because tobacco leaves are cured with the intention of changing their color and reducing their chlorophyll content.

History

Myrtleford, Victoria, Australia: historic tobacco kiln

Curing tobacco has always been a process necessary to prepare the leaf for consumption. In recent time, traditional curing barns in the U.S. are falling into disuse, as the trend toward using prefabricated metal curing boxes has become more and more prevalent. Temporary curing boxes are often found on location at tobacco farms.

Processes

Sun-cured tobacco, Bastam, Iran.
Historic barn for air-curing of tobacco, West Virginia, United States.

Curing and subsequent aging allow for the slow oxidation and degradation of carotenoids in the tobacco leaf. This produces various compounds in the tobacco leaves that give cured tobacco its sweet hay, tea, rose oil, or fruity aromatic flavor that contributes to the "smoothness" of the consumed product. Non-aged or low quality tobacco is often artificially flavored with these otherwise naturally occurring compounds. Tobacco flavoring is a significant source of revenue for the international multimillion-dollar flavor and fragrance industry.[1]

The aging process continues for a period of months and often extends into the post-curing harvest process.

After tobacco is cured, it is moved from the curing barn into a storage area for processing. If whole plants were cut, the leaves are removed from the tobacco stalks in a process called stripping. For both cut and pulled tobacco, the leaves are then sorted into different grades. In colonial times, the tobacco was then "prized" into hogsheads for transportation. In bright tobacco regions, prizing was replaced by stacking wrapped "hands" into loose piles to be sold at auction. Today, most cured tobacco is baled before sales are made under pre-sold contracts.

Methods

Cut plants or pulled leaves are immediately transferred to tobacco barns (kiln houses), where they will be cured. Curing methods vary with the type of tobacco grown, and tobacco barn design varies accordingly.[2]

Air

Air-cured tobacco is hung in well-ventilated barns and allowed to dry over a period of four to eight weeks. Air-cured tobacco is low in sugar, which gives the tobacco smoke a light, sweet flavor, and a high nicotine content. Cigar and burley tobaccos are air cured.[3]

Fire

Fire-cured tobacco is hung in large barns where fires of hardwoods are kept on continuous or intermittent low smoulder and takes between three days and ten weeks, depending on the process and the tobacco. Fire curing produces a tobacco low in sugar and high in nicotine. Pipe tobacco, chewing tobacco, and snuff are fire cured.[4]

Flue

Main article: Flue-cured tobacco

Flue-cured tobacco was originally strung onto tobacco sticks, which were hung from tier-poles in curing barns (Aus: kilns, also traditionally called oasts. These barns have flues which run from externally fed fire boxes, heat-curing the tobacco without exposing it to smoke, slowly raising the temperature over the course of the curing. In the 1960s conversion to gas fueled systems such as the Gastobac Burner System®[5] was common. The process will generally take about a week. This method produces tobacco that is high in sugar and has medium to high levels of nicotine. The Smith Tobacco Barn is an example of a traditional, flue-cured tobacco barn.[6]

Sun

Sun-cured tobacco dries uncovered in the sun. This method is used in Turkey, Greece, Bulgaria, Macedonia, Romania and Mediterranean countries to produce oriental tobacco.[7] Sun-cured tobacco is low in sugar and nicotine. In India sun curing is used to produce so-called "white" snuffs, which are fine, dry, and unusually potent.

See also

Types of tobacco

References

  1. 1 2 "Harvesting, Curing, and Preparing Dark Fire‑Cured Tobacco for Market" (PDF). University of Kentucky, College of Agriculture. Retrieved 6 February 2014.
  2. "Low-Cost Post-Row Field Tobacco Curing Framework". University of Kentucky. Retrieved 6 February 2014.
  3. "Burley Tobacco Curing Advisory" (PDF). University of Kentucky, College of Agriculture. Retrieved 6 February 2014.
  4. "Tobacco Barn Retrofit". The University of Georgia. Retrieved 6 February 2014.
  5. "Gastobac Burner System®". Retrieved 1 June 2015.
  6. T. David Reed. "Flue-cured Tobacco Curing" (PDF). Virginia Polytechnic Institute and State University. Retrieved 6 February 2014.
  7. "TOBACCO AND BETEL". University of Illinois. Retrieved 6 February 2014.
This article is issued from Wikipedia - version of the 9/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.