Colt M1878

This article is about the Colt Model 1878. For other Colt Double Action firearms, see Colt Double Action.
"Colt Frontier" redirects here. For the .44 caliber version of the Single Action Army Revolver, see Colt Frontier Six-Shooter.
Colt M1878

Colt M1878
Type Revolver
Place of origin  USA
Production history
Designer William Mason
Designed 1878
Manufacturer Colt
Produced 1878 (1878)-1907 (1907)
Number built 51,210
Specifications
Caliber .45 Colt, .32-20 WCF, .38 Colt, .38-40 WCF, .41 Colt, .44-40 WCF, .455 Webley, .476 Eley
Action double-action revolver
Feed system Cylinder

The Colt M1878 is a double-action revolver that was manufactured by Colt's Manufacturing Company from 1878 to 1907. It is often referred to as the "Frontier" or the "Double Action Army" revolver. A total of 51,210 Model 1878 revolvers were manufactured from 1878 to 1907, including 4,600 for the US Ordnance Department. These are known as the "Philippine" or "Alaskan" models.[1]

History

Samuel Colt experimented with double-action revolver systems, but he considered them to be unreliable. After Colt's patent expired in 1857, other manufacturers began producing double-action revolvers, but Colt's Manufacturing did not manufacture its own double-action revolver until 1877, twenty years after the patent had expired.[2]

The M1878 was designed by William Mason, Colt's factory manager and Charles Brinckerhoff Richards, Superintendent of Engineering. It was similar in design to the Colt Model 1877. The Model 1878 had a larger frame, and is therefore sometimes referred to as the "large frame" double-action revolver, while the Model 1877 is likewise referred to as the "small frame" double-action revolver. The Model 1878 was considered a more robust and reliable design than the Model 1877.

Design and features

The design of the Model 1878 was based on the Model 1877, which in turn was based heavily on the design of the earlier Colt Single Action Army revolver. The double-action revolver is not dramatically different in design than the single-action revolver. A strut is added to connect the trigger movement to the hammer. The top of the trigger slips beyond the strut so that the hammer will stay in full cock if it is pulled back manually.[3]

The Model 1878 had a larger frame than the Model 1877, which allowed it to fire larger and more powerful cartridges, such as the .45 Colt and .44-40 and used the same barrel, ejector parts, and a very similar cylinder to the Single Action Army revolver. At one time, the factory modified Model 1878 cylinders for use in single-action revolvers in an attempt to use up spare parts.[3]

Variants

The Model 1878 was available in .45 Colt, .32-20, .38 Colt, .38-40, .41 Colt, .44-40, .455 Webley and .476 Eley. The most popular calibers were .45 and .44-40.

Colt Model 1902 "Philippine"

Standard grips were black checkered hard rubber but some early revolvers were produced with checkered walnut grips. Barrel lengths available were 3, 3-1/2, 4, 4-3/4, 5-1/2, and 7-1/2 inches.[1] Revolvers with 3 inch and shorter barrels did not have an ejector.[3]

In 1902, 4,600 Model 1878 revolvers were produced for a U.S. Army contract. They were intended to equip the Philippine Constabulary under Brigadier General Henry T. Allen in the Philippine Insurrection. These revolvers had a 6-inch barrel, a hard rubber grip, and were chambered for the .45 Colt round. They had a strengthened main spring and a longer trigger to give the user more leverage, resulting a larger trigger guard. The strengthened main spring was necessary to fire the .45 Government rounds with a less sensitive primer compared to the civil .45 LC ammunition. Many people have incorrectly assumed that this was to allow the revolver to be operated while wearing gloves, so "Alaskan Model" is a misnomer.[1]

References

  1. 1 2 3 Flayderman, Norm (3 December 2007). Flayderman's Guide to Antique American Firearms and Their Values. Iola, Wisconsin: Gun Digest Books. pp. 109–110. ISBN 1-4402-2651-2.
  2. Boorman, Dean K. (2004). Guns of the Old West: An Illustrated History. Globe Pequot Press. pp. 34–35. ISBN 978-1-59228-638-6.
  3. 1 2 3 Chicoine, David (28 September 2005). Antique Firearms Assembly/Disassembly: The Comprehensive Guide to Pistols, Rifles & Shotguns. Iola, wisconsin: Krause Publications. pp. 76–77. ISBN 0-87349-767-8.

External links

This article is issued from Wikipedia - version of the 10/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.