Cab Secure Radio
Cab Secure Radio (CSR) is an in-cab analogue radiotelephone system used on parts of the British railway network. Its main function is to provide a secure speech link between the train driver and the signaller which cannot be overheard by other train drivers. In areas where CSR is used it must be the primary method of communication between driver and signaller, always being used in preference to the signal post telephone. Within the next few years CSR will be replaced by the GSM-R digital system, as it forms the initial phase of rollout of ERTMS throughout the UK.
History
CSR was first introduced in the Glasgow area in 1986 to enable driver-only operation of trains. It was later used in the London and Liverpool areas.[1]
Functions
- Signaller can call and speak to driver.
- Driver can call and speak to signaller.
- Signaller and driver can exchange preset text messages.
- Signaller can send emergency stop messages to a particular train, or all trains in an area.
- Driver can make an emergency call to signaller.
- Signaller can speak to passengers via the train's public address system.
- Signaller can connect driver to the railway telephone network.
- Signaller notified if DSD is released after DSD alarm displays for 30 seconds on radio
Use
The driver initialises the CSR with an area code followed by the identification number of the signal in front of the train. The radio then automatically sends the stock number of the train (e.g., 455112), to the signalling system. The signaller then allocates a train reporting number (e.g., 2M34) to the train. This reporting number is used by the signalling equipment to track the progress of the train as it moves through the rail network.
Each signalling area (or signal panel within a larger signalbox) uses a different radio channel corresponding with an area code. As the train passes from the jurisdiction of one signaller to another, the CSR in the driver's cab changes channel automatically. Lineside signs are provided to inform the driver of where the area code changes. Occasionally the radio may fail to change channel or lose the signal completely, in which case the driver can enter the code manually.
Hardware
CSR cab equipment can be the Stornophone 6000 or a Siemens model.[3]
See also
- National Radio Network (UK railways)
- Fixed Telecomms Network
- GSM-R
- RETB
- ERTMS
- British Rail Telecommunications
References
- ↑ In the Railway rule book there is provision for a driver stopped at a red signal to disembark the train and access a track-side telephone in order to talk to the signalman. This might be occasioned by a scenario where there was a track circuit failure and the signals had reverted to the safe condition. The rule book however also requires the train to be continuously manned during normal running operations. CSR was first introduced to allow the driver to talk to the signalman without leaving the train. The safety features associated with CSR whereby a signalman can send an alarm to a train or order a train to stop using a single data transmission service later secured CSR as a safety facility that could be deployed on a more universal basis. However it wasn't until the Clapham Rail disaster and subsequent Hidden report also followed by the accident at Cowden where the real value of the facility was learned. "Railway Signs and Signals of Great Britain". Retrieved 2008-09-14.
- ↑ Stafford, James (2008-06-01). "CSR Handbook RS/516 Issue 1" (PDF). Rail Safety and Standards Board. pp. ch. 1.4, Types of radio call. Retrieved 2011-12-10.
- ↑ Stafford, James (2008-06-01). "CSR Handbook RS/516 Issue 1" (PDF). Rail Safety and Standards Board. pp. 11, Examples of the driver's CSR radio. Retrieved 2011-12-10.