Burst mode (computing)

Burst mode (alternatively burst-mode) is a generic electronics term referring to any situation in which a device is transmitting data repeatedly without going through all the steps required to transmit each piece of data in a separate transaction. The usual reason for having a burst mode capability, or using burst mode, is to increase data throughput.^[1] The steps left out while performing a burst mode transaction may include A: waiting for input from another device; B: waiting for an internal process to terminate before continuing the transfer of data; or C: transmitting information which would be required for a complete transaction, but which is inherent in the use of burst mode.^[2]

In the case of DMA, the DMA controller and the device are given exclusive access to the bus without interruption; the CPU is also freed from handling device interrupts.

The actual manner in which burst modes work varies from one type of device to another; however, devices that have some sort of a standard burst mode include the following:

• Random access memory (RAM), including EDO, SDRAM, DDR SDRAM, and RDRAM; only the last three are required to send data in burst mode, according to industry standards
• Hard disk drive (HDD) interfaces such as SCSI and IDE
• Accelerated Graphics Port (AGP) devices; partially, as the write-combining is similar in purpose and meaning

See also

• Asynchronous I/O
• Command queue
• Direct memory access (DMA)
• SDRAM burst ordering

References