Burnelli CB-16
| CB-16 | |
|---|---|
 | |
| Role | Passenger aircraft |
| National origin | United States of America |
| Manufacturer | Burnelli |
| Designer | Vincent Burnelli |
| First flight | 8 January 1929[1] |
| Number built | 1[2] |
|
| |
The Burnelli CB-16, also known as the Uppercu-Burnelli CB-300, was a passenger aircraft designed by the American company Burnelli in 1928. It was the first twin-engined aircraft to have retractable landing gear[2] and the first to maintain altitude on only one out of two engines. Only one was built.
Design and development
The CB-16 was built for and financed by Paul W. Chapman, chairman of Sky Lines Inc. in 1928, following the success of the Burnelli RB-2.
The CB-16 was a twin-engined high-wing monoplane, constructed of metal. The slightly tapered wing was braced from the lower fuselage by pairs of parallel struts. The fuselage was 36 ft (11 m) long and 12 ft (3.7 m wide) wide externally, with an airfoil cross section. As with the earlier RB-1 and RB-2, the twin engines were embedded within the leading edge of the fuselage though, unlike them, the rest of this surface was largely filled with radiators. To reduce yaw after an engine failure, the 500 hp (370 kW) water cooled Curtiss Conqueror inline engines were mounted with slight toe out. The internal dimensions of the cabin, which could seat 12-20 passengers, were 18 ft (5.49 m) by 11 ft 4 in (3.45 m) long, with a height of 5 ft 6 in (1.71 m). This provided both seating and lounge space. At the rear of the cabin there was a small kitchen and toilets. The pilots sat in open cockpits placed at the wing leading edge.[1][3]
Earlier Burnelli lifting body designs had fuselages which were rectangular in plan, with the empennage directly attached, but the CB-16's fuselage tapered and the tail unit was mounted beyond the lifting body's trailing edge on a pair of thin panels extending from its sides. The alteration was motivated by the difficulties of pitch and yaw control encountered with the earlier arrangement. The panels swept upwards into a pair of fins and balanced rudders carrying a high set tailplane with three balanced elevators, the rudders working between them. The single wheels of the still novel retracting undercarriage were mounted on V-struts hinged at the lower, outer fuselage, retracting inwards.[1]
The completed aircraft was shipped to Newark, New Jersey. In January 1929 Leigh Wade piloted the aircraft on a 40 minute test flight.[1] Further tests were then conducted at Curtiss Field at Long Island and Bolling Field in Washington. In 1929, during a test, the CB-16 stalled and crashed at take off, though the two pilots survived.[2]
Specifications
Data from Flight, 1929[1]
General characteristics
- Crew: 2
- Capacity: 2 pilots, up to 20 passengers
- Length: 47 ft 0 in (14.33 m)
- Wingspan: 90 ft 0 in (27.43 m)
- Wing area: 1,018 sq ft (94.6 m2)
- Empty weight: 8,700 lb (3,946 kg)
- Gross weight: 11,700 lb (5,307 kg)
- Fuel capacity: 1,000 US gal (834 Imp gal, 3,790 L)
- Powerplant: 2 × Curtiss Conqueror V-12 piston engine, 500 hp (370 kW) each
- Propellers: 2-bladed
Performance
- Maximum speed: 145 mph (233 km/h; 126 kn)
- Cruise speed: 115 mph (100 kn; 185 km/h)
- Stall speed: 52 mph (45 kn; 84 km/h)
- Range: 800 mi (695 nmi; 1,287 km) [2]
- Service ceiling: 16,500 ft (5,029 m)
- Rate of climb: 940 ft/min (4.8 m/s)
Notes
References
 |
Wikimedia Commons has media related to Burnelli CB-16. |
- "Burnelli's Lifting Fuselages (Part 2)". Aeroplane Monthly. Vol. 8 no. 4. April 1980. pp. 172–6..
- AAHS journal, Volume 42. American Aviation Historical Society. 1997.
- Popular Science. Vol. 147. Bonnier Corporation. November 1945. p. 69. ISSN 0161-7370. Missing or empty
|title=(help) - "AeroFiles - Burnelli aircraft". Retrieved 2011-03-13.
- "The Burnelli Monoplane.". Flight. No. 7 March 1929. p. 179.
- "An Original Design". Flight. No. 28 March 1929. p. 254.
- "Cutaway Drawing of Burnelli transport in flight" Popular Mechanics, December 1930