Archimedean spiral

Three 360° turnings of one arm of an Archimedean spiral
Archimedean spiral represented on a polar graph

The Archimedean spiral (also known as the arithmetic spiral) is a spiral named after the 3rd century BC Greek mathematician Archimedes. It is the locus of points corresponding to the locations over time of a point moving away from a fixed point with a constant speed along a line which rotates with constant angular velocity. Equivalently, in polar coordinates (r, θ) it can be described by the equation

with real numbers a and b. Changing the parameter a will turn the spiral, while b controls the distance between successive turnings.

Archimedes described such a spiral in his book On Spirals.

Characteristics

The Archimedean spiral has the property that any ray from the origin intersects successive turnings of the spiral in points with a constant separation distance (equal to 2πb if θ is measured in radians), hence the name "arithmetic spiral".

In contrast to this, in a logarithmic spiral these distances, as well as the distances of the intersection points measured from the origin, form a geometric progression.

The Archimedean spiral has two arms, one for θ > 0 and one for θ < 0. The two arms are smoothly connected at the origin. Only one arm is shown on the accompanying graph. Taking the mirror image of this arm across the y-axis will yield the other arm.

For large θ a point moves with well-approximated uniform acceleration along the Archimedean spiral while the spiral corresponds to the locations over time of a point moving away from a fixed point with a constant speed along a line which rotates with constant angular velocity  A091154 (see contribution from Mikhail Gaichenkov).

Separation distance between turns

Some sources describe the Archimedean spiral as a spiral with a "constant separation distance" between successive turns.[1] This is somewhat misleading. The constant distances in the Archimedean spiral are measured along rays from the origin, which do not cross the curve at right angles, whereas a distance between parallel curves is measured orthogonally to both curves. There is a curve slightly different from the Archimedean spiral, the involute of a circle, whose turns have constant separation distance in the latter sense of parallel curves.

General Archimedean spiral

Sometimes the term Archimedean spiral is used for the more general group of spirals

The normal Archimedean spiral occurs when c = 1. Other spirals falling into this group include the hyperbolic spiral, Fermat's spiral, and the lituus. Virtually all static spirals appearing in nature are logarithmic spirals, not Archimedean ones. Many dynamic spirals (such as the Parker spiral of the solar wind, or the pattern made by a Catherine's wheel) are Archimedean.

Applications

One method of squaring the circle, due to Archimedes, makes use of an Archimedean spiral. Archimedes also showed how the spiral can be used to trisect an angle. Both approaches relax the traditional limitation on the use of straightedge and compass.[2]

The Archimedean spiral has a variety of real-world applications. Scroll compressors, made from two interleaved involutes of a circle of the same size that almost resemble Archimedean spirals, are used for compressing liquids and gases.[3] The coils of watch balance springs and the grooves of very early gramophone records form Archimedean spirals, making the grooves evenly spaced and maximizing the amount of music that could be cut onto the record (although this was later changed to allow better sound quality).[4] Asking for a patient to draw an Archimedean spiral is a way of quantifying human tremor; this information helps in diagnosing neurological diseases. Archimedean spirals are also used in digital light processing (DLP) projection systems to minimize the "rainbow effect", making it look as if multiple colors are displayed at the same time, when in reality red, green, and blue are being cycled extremely quickly.[5] Additionally, Archimedean spirals are used in food microbiology to quantify bacterial concentration through a spiral platter.[6] They are also used to model the pattern that occurs in a roll of paper or tape of constant thickness wrapped around a cylinder.[7][8]

See also

References

  1. ↑ "successive turnings of the Archimedean spiral have a constant separation distance" Havil, Julian (2007). Nonplussed! Mathematical Proof of Implausible Ideas. Princeton, New Jersey: Princeton Universoty Press. p. 109. ISBN 978-0-691-12056-0.
  2. ↑ Boyer, Carl B. (1968). A History of Mathematics. Princeton, New Jersey: Princeton University Press. pp. 140–142. ISBN 0-691-02391-3.
  3. ↑ Sakata, Hirotsugu; Masayuki Okuda. "Fluid compressing device having coaxial spiral members". Retrieved 2006-11-25.
  4. ↑ Penndorf, Ron. "Early Development of the LP". Archived from the original on 5 November 2005. Retrieved 2005-11-25.. See the passage on Variable Groove.
  5. ↑ Ballou, Glen (2008), Handbook for Sound Engineers, CRC Press, p. 1586, ISBN 9780240809694
  6. ↑ J. E. Gilchrist; J. E. Campbell; C. B. Donnelly; J. T. Peeler; J. M. Delaney. "Spiral Plate Method for Bacterial Determination".
  7. ↑ Tony Peressini (3 February 2009). "Joan's Paper Roll Problem" (PDF). Retrieved 2014-10-06.
  8. ↑ Walser, H.; Hilton, P.; Pedersen, J.; Mathematical Association of America (2000). Symmetry. Mathematical Association of America. p. 27. ISBN 9780883855324. Retrieved 2014-10-06.

External links

Wikimedia Commons has media related to Archimedean spirals.

This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.