Aoyagi Metals Company

Aoyagi Metals Company
Private
Founded 1960s
Defunct early 1990s
Headquarters Edogawa, Tokyo, Japan
Products Radio-controlled model cars, slot cars

Aoyagi Metals Industry Co. Ltd (青柳金属工業有限会社 Aoyagi Kinzoku Kōgyō Yūgen-gaisha) (commonly known as Ayk in America and Aoyagi in Japan) was a Japanese company that became notable in the 1980s for its radio-controlled cars.

The company began in the 1960s manufacturing metal chassis for slotcar racing; 1978 saw the introduction of the RX1200, a 1:12 scale on-road racer, which was the start of the RX series of 1/12-scale on-road chassis. The RX2000 followed and took the JMRCA All-Japan Championship title in 1980, the first of three consecutive titles for the company. In 1984, JMRCA was won by Joel Johnson on his first trip to Japan with Trinity.

Conventional manufacturers mounted their differential gears between the right rear wheel and the motor compartment, but ayk placed theirs within the axle, which centered the weight more proportionately and kept the differential gears protected. By 1984, they resorted to an outboard gear diff much like the current Delta of the time.

In 1982, the same year that AYK took its third consecutive 1:12 title (with the RX3000 EXL480), like other manufacturers, ayk broke into the 1:10 off-road buggy market with the 566 B Super Trail. The buggy included aluminum chassis, enclosed transmission with all-aluminum gears, and a waterproof radio case. This model was closely followed in the early eighties by a series of race-ready 1/10 off-road buggies which saw reasonable success on the semi-pro circuit.

By the mid-1980s, Ayk abandoned the 1:10 two-wheel-drive off-road to concentrate on off-road four-wheel-drive models and on-road 1/12 scale.

After winning the JMRCA 1:12 on-road title with the Super Parsec, the company began its decline following the death of its president in 1989. The Japanese asset price bubble (バブル景気 baburu keiki) bursting in Japan was the other primary reason AYK closed down. These two events had more to do with AYK closing than the common overseas RC market rumor.

One of its staff members, Tatsuro Watanabe, left the company by 1986 to emigrate to the United States to start up Hobby Products International, a company specialising in radio-controlled cars. Later on, some other employees found themselves working either for his company (Hiroyuki Iida) or rival manufacturer Mugen Seiki (Takashi Aizawa and Koji Sanada).

The Koiwa Ayk office still stands, although the service center is now an apartment complex.

Current market

Due to relatively small numbers, imported examples of AYK radio controlled cars are now extremely rare outside Japan and as such have inflated prices. Prices in Japan have also risen on and off-road cars dues to the ease that the Internet allows overseas buyers to use Japanese auctions. While 1/12 on-road still may be purchased at reasonable prices from the Japanese second hand market due to this class being less popular with overseas buyers. Early 1/10th AYK radio controlled cars from the 'goldn era' of RC racing (the early to mid 1980's command high prices) Many AYK slot cars seem to have been imported to Australia and were actually stamped and sold as AYK. Australia would be a better source for AYK cars if one is hunting.

Slot cars

AYK manufactured slot car chassis that included brass chassis, stamped steel chassis(similar to the Flexi from Parma), and a bolt together parallel dragster chassis to name a few. One item of note from AYK was the controller that AYK made for slot car racing. Unlike the current controllers that are all based on the Ruskit, AYK manufactured a controller that was held in the left hand and had a lever that controlled the speed using the right hand. This controller was the standard in Japan for a while. AYK also OEM various slot car parts and chassis to American companies. AYK also produced OEM parts for such companies such as Trinity during the 1980s for the 1/10-scale buggy market.

Motor sports

AYK sponsored the Nissan Fairlady ZC team in the WEC Championship. This car was copied in 1/12 scale by AYK and is one of the bodies available in the RG Impulse Kit. AYK also sponsored Toshio Suzuki's Formula 3 entry; the car was either Toyota or Alfa Romeo powered. The March 803 was red with blue three-color AYK logos, one on each side and one forward of the cockpit. These logos were hand-cut by AYK chief of media design.

1/12 on-road

The chassis are listed followed by the bodies that were available with the kits in the Japanese market. Race Prep (who was the second importer of AYK in America) kits are not included as a complete list is not available at this time.

OEM

R&D Ishihara is a company named after its founder Naoki Ishihara. He is a 1/12-scale racer in Japan that developed his own ideas about what he needed in a 1/12-scale car. Before the introduction of the NX series he was producing his own after market parts for 1/12-scale cars. Even though AYK produced the NX series, they still competed against them with their own series of cars. Ishihara is not the only company AYK produced cars for, many European companies imported AYK cars and simply placed their sticker on the box.

1/10 off-road

Accessories

References

    External links

    This article is issued from Wikipedia - version of the 12/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.