Opteron

Not to be confused with Operon.
Opteron
Produced From April 2003 to present
Common manufacturer(s)
  • AMD
Max. CPU clock rate 1.4 GHz to 3.5 GHz
HyperTransport speeds 800 MHz to 3200 MHz
Min. feature size 130 nm to 28 nm
Instruction set x86-64, ARMv8-A
Cores 1, 2, 4, 6, 8, 12 & 16
Socket(s)

Opteron is AMD's x86 server and workstation processor line, and was the first processor which supported the AMD64 instruction set architecture (known generically as x86-64). It was released on April 22, 2003 with the SledgeHammer core (K8) and was intended to compete in the server and workstation markets, particularly in the same segment as the Intel Xeon processor. Processors based on the AMD K10 microarchitecture (codenamed Barcelona) were announced on September 10, 2007 featuring a new quad-core configuration. The most-recently released Opteron CPUs are the Piledriver-based Opteron 4300 and 6300 series processors, codenamed "Seoul" and "Abu Dhabi" respectively. In January 2016, the first ARMv8-A based Opteron SoC was released.

Technical description

Opteron 2212

Two key capabilities

Opteron combines two important capabilities in a single processor:

  1. native execution of legacy x86 32-bit applications without speed penalties
  2. native execution of x86-64 64-bit applications

The first capability is notable because at the time of Opteron's introduction, the only other 64-bit architecture marketed with 32-bit x86 compatibility (Intel's Itanium) ran x86 legacy-applications only with significant speed degradation. The second capability, by itself, is less noteworthy, as major RISC architectures (such as SPARC, Alpha, PA-RISC, PowerPC, MIPS) have been 64-bit for many years. In combining these two capabilities, however, the Opteron earned recognition for its ability to run the vast installed base of x86 applications economically, while simultaneously offering an upgrade-path to 64-bit computing.

The Opteron processor possesses an integrated memory controller supporting DDR SDRAM, DDR2 SDRAM or DDR3 SDRAM (depending on processor generation). This both reduces the latency penalty for accessing the main RAM and eliminates the need for a separate northbridge chip.

Multi-processor features

In multi-processor systems (more than one Opteron on a single motherboard), the CPUs communicate using the Direct Connect Architecture over high-speed HyperTransport links. Each CPU can access the main memory of another processor, transparent to the programmer. The Opteron approach to multi-processing is not the same as standard symmetric multiprocessing; instead of having one bank of memory for all CPUs, each CPU has its own memory. Thus the Opteron is a Non-Uniform Memory Access (NUMA) architecture. The Opteron CPU directly supports up to an 8-way configuration, which can be found in mid-level servers. Enterprise-level servers use additional (and expensive) routing chips to support more than 8 CPUs per box.

In a variety of computing benchmarks, the Opteron architecture has demonstrated better multi-processor scaling than the Intel Xeon[1] which didn't have a point to point system until QPI and integrated memory controllers with the Nehalem design. This is primarily because adding another Opteron processor increases memory bandwidth, while that is not always the case for Xeon systems, and the fact that the Opterons use a switched fabric, rather than a shared bus. In particular, the Opteron's integrated memory controller allows the CPU to access local RAM very quickly. In contrast, multiprocessor Xeon system CPUs share only two common buses for both processor-processor and processor-memory communication. As the number of CPUs increases in a typical Xeon system, contention for the shared bus causes computing efficiency to drop. Intel is migrating to a memory architecture similar to the Opteron's for the Intel Core i7 family of processors and their Xeon derivatives.

Multi-core Opterons

Quad-core "Barcelona" Opteron
Six-core "Istanbul" Opteron

In April 2005, AMD introduced its first multi-core Opterons. At the time, AMD's use of the term multi-core in practice meant dual-core; each physical Opteron chip contained two processor cores. This effectively doubled the computing performance available to each motherboard processor socket. One socket could then deliver the performance of two processors, two sockets could deliver the performance of four processors, and so on. Because motherboard costs increase dramatically as the number of CPU sockets increase, multicore CPUs enable a multiprocessing system to be built at lower cost.

AMD's model number scheme has changed somewhat in light of its new multicore lineup. At the time of its introduction, AMD's fastest multicore Opteron was the model 875, with two cores running at 2.2 GHz each. AMD's fastest single-core Opteron at this time was the model 252, with one core running at 2.6 GHz. For multithreaded applications, or many single threaded applications, the model 875 would be much faster than the model 252.

Second-generation Opterons are offered in three series: the 1000 Series (single socket only), the 2000 Series (dual socket-capable), and the 8000 Series (quad or octo socket-capable). The 1000 Series uses the AM2 socket. The 2000 Series and 8000 Series use Socket F.

AMD announced its third-generation quad-core Opteron chips on September 10, 2007[2][3] with hardware vendors announcing servers in the following month. Based on a core design codenamed Barcelona, new power and thermal management techniques were planned for the chips. Earlier dual core DDR2 based platforms were upgradeable to quad core chips.[4] The fourth generation was announced in June 2009 with the Istanbul hexa-cores. It introduced HT Assist, an additional directory for data location, reducing the overhead for probing and broadcasts. HT Assist uses 1 MB L3 cache per CPU when activated.[5]

In March 2010 AMD released the Magny-Cours Opteron 6100 series CPUs for Socket G34. These are 8- and 12-core multi-chip module CPUs consisting of two four or six-core dies with a HyperTransport 3.1 link connecting the two dies. These CPUs updated the multi-socket Opteron platform to use DDR3 memory and increased the maximum HyperTransport link speed from 2.40 GHz (4.80 GT/s) for the Istanbul CPUs to 3.20 GHz (6.40 GT/s).

AMD changed the naming scheme for its Opteron models. Opteron 4000 series CPUs on Socket C32 (released July 2010) are dual-socket capable and are targeted at uniprocessor and dual-processor uses. The Opteron 6000 series CPUs on Socket G34 are quad-socket capable and are targeted at high-end dual-processor and quad-processor applications.

Socket 939

AMD released Socket 939 Opterons, reducing the cost of motherboards for low-end servers and workstations. Except for the fact they have 1 MB L2 Cache (versus 512 KB for the Athlon64) the Socket 939 Opterons are identical to the San Diego and Toledo core Athlon 64s, but are run at lower clock speeds than the cores are capable of, making them more stable.

Socket AM2

Socket AM2 Opterons are available for servers that only have a single-chip setup. Codenamed Santa Ana, rev. F dual core AM2 Opterons feature 2×1 MB L2 cache, unlike the majority of their Athlon 64 X2 cousins which feature 2x512 KB L2 cache. These CPUs are given model numbers ranging from 1210 to 1224.

Socket AM2+

AMD introduced three quad-core Opterons on Socket AM2+ for single-CPU servers in 2007. These CPUs are produced on a 65 nm manufacturing process and are similar to the Agena Phenom X4 CPUs. The Socket AM2+ quad-core Opterons are code-named "Budapest." The Socket AM2+ Opterons carry model numbers of 1352 (2.10 GHz), 1354 (2.20 GHz), and 1356 (2.30 GHz.)

Socket AM3

AMD introduced three quad-core Opterons on Socket AM3 for single-CPU servers in 2009. These CPUs are produced on a 45 nm manufacturing process and are similar to the Deneb-based Phenom II X4 CPUs. The Socket AM3 quad-core Opterons are code-named "Suzuka." These CPUs carry model numbers of 1381 (2.50 GHz), 1385 (2.70 GHz), and 1389 (2.90 GHz.)

Socket AM3+

Socket_AM3+ was introduced in 2011 and is a modification of AM3 for the Bulldozer microarchitecture. Opteron CPUs in the AM3+ package are named Opteron 3xxx.

Socket F

Socket F (LGA 1207 contacts) is AMD’s second generation of Opteron socket. This socket supports processors such as the Santa Rosa, Barcelona, Shanghai, and Istanbul codenamed processors. The “Lidded land grid array” socket adds support for DDR2 SDRAM and improved HyperTransport version 3 connectivity. Physically the socket and processor package are nearly identical, although not generally compatible with socket 1207 FX.

Socket G34

Socket G34 (LGA 1944 contacts) is one of the third generation of Opteron sockets, along with Socket C32. This socket supports Magny-Cours Opteron 6100, Bulldozer-based Interlagos Opteron 6200, and Piledriver-based "Abu Dhabi" Opteron 6300 series processors. This socket supports four channels of DDR3 SDRAM (two per CPU die). Unlike previous multi-CPU Opteron sockets, Socket G34 CPUs will function with unbuffered ECC or non-ECC RAM in addition to the traditional registered ECC RAM.

Socket C32

Socket C32 (LGA 1207 contacts) is the other member of the third generation of Opteron sockets. This socket is physically similar to Socket F but is not compatible with Socket F CPUs. Socket C32 uses DDR3 SDRAM and is keyed differently so as to prevent the insertion of Socket F CPUs that can use only DDR2 SDRAM. Like Socket G34, Socket C32 CPUs will be able to use unbuffered ECC or non-ECC RAM in addition to registered ECC SDRAM.

Micro-architecture update

The Opteron line saw an update with the implementation of the AMD K10 microarchitecture. New processors, launched in the third quarter of 2007 (codename Barcelona), incorporate a variety of improvements, particularly in memory prefetching, speculative loads, SIMD execution and branch prediction, yielding an appreciable performance improvement over K8-based Opterons, within the same power envelope.[6]

In the meantime, AMD has also utilized a new scheme to characterize the power consumption of new processors under "average" daily usage, named average CPU power (ACP).

Socket FT3

The Opteron X1150 and Opteron X2150 APU are used with the BGA-769 or Socket FT3.[7]

Models

For Socket 940 and Socket 939 Opterons, each chip has a three-digit model number, in the form Opteron XYY. For Socket F and Socket AM2 Opterons, each chip has a four-digit model number, in the form Opteron XZYY. For all first, second, and third-generation Opterons, the first digit (the X) specifies the number of CPUs on the target machine:

For Socket F and Socket AM2 Opterons, the second digit (the Z) represents the processor generation. Presently, only 2 (dual-core, DDR2), 3 (quad-core, DDR2) and 4 (six-core, DDR2) are used.

Socket C32 and G34 Opterons use a new four-digit numbering scheme. The first digit refers to the number of CPUs in the target machine:

Like the previous second and third generation Opterons, the second number refers to the processor generation. "1" refers to AMD K10-based units (Magny-Cours and Lisbon), "2" refers to the Bulldozer-based Interlagos, Valencia, and Zurich-based units, and "3" refers to the Piledriver-based Abu Dhabi, Seoul, and Delhi-based units.

For all Opterons, the last two digits in the model number (the YY) indicate the clock frequency of a CPU, a higher number indicating a higher clock frequency. This speed indication is comparable to processors of the same generation if they have the same amount of cores, single-cores and dual-cores have different indications despite sometimes having the same clock frequency.

The suffix HE or EE indicates a high-efficiency/energy-efficiency model having a lower TDP than a standard Opteron. The suffix SE indicates a top-of-the-line model having a higher TDP than a standard Opteron.

Starting from 65 nm fabrication process, the Opteron codenames have been based on Formula 1 hosting cities; AMD has a long term sponsorship with F1's most successful team, Ferrari.

AMD Opteron processor family
Logo Server
Codename Process Date released Cores
SledgeHammer
Venus
Troy
Athens		 130 nm
90 nm
90 nm
90 nm		 Jun 2003
Aug 2005
Jan 2006
Jan 2006		 1
Denmark
Italy
Egypt
Santa Ana
Santa Rosa		 90 nm
90 nm
90 nm
90 nm
90 nm		 Mar 2006
May 2006
Jun 2006
Aug 2006
Aug 2006		 2
Barcelona
Budapest
Shanghai		 65 nm
65 nm
45 nm		 Sep 2007
Apr 2008
Nov 2008		 4
Istanbul 45 nm Jun 2009 6
Lisbon 45 nm Jun 2010 4,6
Magny-Cours 45 nm Mar 2010 8,12
Valencia 32 nm Nov 2011 4,6,8
Interlagos 32 nm Nov 2011 4,8,12,16
Zurich 32 nm Mar 2012 4, 8
Abu Dhabi 32 nm Nov 2012 4,8,12,16
Warsaw 32 nm Dec 2012 4, 8
Delhi 32 nm Nov 2012 4,8,12,16
Seoul 32 nm Dec 2012 4, 6, 8
Warsaw 32 nm Jan 2014 4, 8[8]
List of AMD Opteron microprocessors

Opteron (130 nm SOI)

Single-core – SledgeHammer (1yy, 2yy, 8yy)

Opteron (90 nm SOI, DDR)

Single-core – Venus (1yy), Troy (2yy), Athens (8yy)
Dual-core – Denmark (1yy), Italy (2yy), Egypt (8yy)

Opteron (90 nm SOI, DDR2)

Dual-core – Santa Ana (12yy), Santa Rosa (22yy, 82yy)

Opteron (65 nm SOI)

Quad-core – Barcelona (23xx, 83xx) 2360/8360 and below, Budapest (13yy) 1356 and below

Opteron (45 nm SOI)

Quad-core – Shanghai (23xx, 83xx) 2370/8370 and above, Suzuka (13yy) 1381 and above
6-core – Istanbul (24xx, 84xx)

Released June 1, 2009.

8-core – Magny-Cours MCM (6124-6140)

Released March 29, 2010.

12-core – Magny-Cours MCM (6164-6180SE)

Released March 29, 2010

Quad-core – Lisbon (4122, 4130)

Released June 23, 2010

Hex-core – Lisbon (4162-4184)

Released June 23, 2010

Opteron (32 nm SOI)- First Generation Bulldozer Microarchitecture

Quad-core - Zurich (3250-3260)

Released March 20, 2012.

Eight-core - Zurich (3280)

Released March 20, 2012.

6-core - Valencia (4226-4238)

Released November 14, 2011.

8-core - Valencia (4256 HE-4284)

Released November 14, 2011.

Quad-core - Interlagos MCM (6204)

Released November 14, 2011.

8-core - Interlagos (6212, 6220)

Released November 14, 2011.

12-core - Interlagos (6234, 6238)

Released November 14, 2011.

16-core - Interlagos (6262 HE-6284 SE)

Released November 14, 2011.

Opteron (32 nm SOI) - Piledriver microarchitecture

Quad-core - Delhi (3320 EE, 3350 HE)

Released December 4, 2012.

Eight-core - Delhi (3380)

Released December 4, 2012.

4-core - Seoul (4310 EE)

Released December 4, 2012

6-core - Seoul (4332 HE - 4340)

Released December 4, 2012

8-core - Seoul (4376 HE and above)

Released December 4, 2012

Quad-core - Abu Dhabi MCM (6308)

Released November 5, 2012.

Eight-core - Abu Dhabi MCM (6320, 6328)

Released November 5, 2012.

12-core - Abu Dhabi MCM (6344, 6348)

Released November 5, 2012.

16-core - Abu Dhabi MCM (6366 HE and above)

Released November 5, 2012.

Opteron X (28 nm bulk) - Jaguar microarchitecture

Quad-core - Kyoto (X1150)

Released May 29, 2013

Quad-core APU - Kyoto (X2150)

Released May 29, 2013

Opteron A (28 nm) - Seattle ARM microarchitecture

A1100-series

The Opteron A1100-series "Seattle" (28nm) are SoCs based on ARM Cortex-A57 cores that use the ARMv8-A instruction set. They were first released in January 2016.[9][10]

Supercomputers

Opteron processors first appeared in the top 100 systems of the fastest supercomputers in the world list in the early 2000s. By the summer of 2006, 21 of the top 100 systems used Opteron processors, and in the November 2010 and June 2011 lists the Opteron reached its maximum representation of 33 of the top 100 systems. The number of Opteron-based systems decreased fairly rapidly after this peak, falling to 5 of the top 100 systems in the most recent (June 2015) list.[11]

Several supercomputers using only Opteron processors were ranked in the top 10 systems between 2003 and 2015, notably:

Other top 10 systems using a combination of Opteron processors and compute accelerators have included:

Issues

Opteron without Optimized Power Management

AMD released some Opteron processors without Optimized Power Management (OPM) support, which use DDR memory. The following table describes those processors without OPM.

Max P-state
frequency 		Min P-state
frequency 		Model Package-socket Core # TDP (W) Manufacturing
process 		Part number (OPN)
1400 MHz N/A 140 Socket 940 1 82.1 130 nm OSA140CEP5AT
1400 MHz N/A 240 Socket 940 1 82.1 130 nm OSA240CEP5AU
1400 MHz N/A 840 Socket 940 1 82.1 130 nm OSA840CEP5AV
1600 MHz N/A 142 Socket 940 1 82.1 130 nm OSA142CEP5AT
1600 MHz N/A 242 Socket 940 1 82.1 130 nm OSA242CEP5AU
1600 MHz N/A 842 Socket 940 1 82.1 130 nm OSA842CEP5AV
1600 MHz N/A 242 Socket 940 1 85.3 90 nm OSA242FAA5BL
1600 MHz N/A 842 Socket 940 1 85.3 90 nm OSA842FAA5BM
1600 MHz N/A 260 Socket 940 2 55.0 90 nm OSK260FAA6CB
1600 MHz N/A 860 Socket 940 2 55.0 90 nm OSK860FAA6CC

Opteron recall (2006)

AMD recalled some E4 stepping-revision single-core Opteron processors, including x52 (2.6 GHz) and x54 (2.8 GHz) models which use DDR memory. The following table describes affected processors, as listed in AMD Opteron x52 and x54 Production Notice of 2006.[12]

Max P-state
frequency 		Uni-processor Dual processor Multi-processor Package-socket
2600 MHz 152 252 852 Socket 940
2800 MHz N/A 254 854 Socket 940
2600 MHz 152 N/A N/A Socket 939
2800 MHz 154 N/A N/A Socket 939

The affected processors may produce inconsistent results if three specific conditions occur simultaneously:

A software verification tool for identifying the AMD Opteron processors listed in the above table that may be affected under these specific conditions is available, only to AMD OEM partners. AMD will replace those processors at no charge.

Recognition

In the February 2010 issue of Custom PC (a UK based computing magazine focused on PC hardware), the AMD Opteron 144 (released in Summer 2005) appeared in the "Hardware Hall of Fame". It was described as "The best overclocker's CPU ever made" due to its low cost and ability to run at speeds way beyond its stock speed (according to Custom PC, it could run at "close to 3 GHz on air").

See also

References

  1. ↑ "SPECint2006 Rate Results for multiprocessor systems". Retrieved December 27, 2008.
  2. ↑ "AMD Introduces the World's Most Advanced x86 Processor, Designed for the Demanding Datacenter". Press release. AMD. September 10, 2007. Retrieved January 6, 2014.
  3. ↑ "The Inner circuitry of the powerful quad-core AMD processor". Photo. AMD. Archived from the original on November 28, 2008. Retrieved January 6, 2011.
  4. ↑ "Quad-Core Upgradeability". Retrieved March 6, 2007. 6-core Opteron Processors codenamed 'Istanbul' were announced on July 1, 2009. They were a drop-in upgrade for existing Socket F servers.
  5. ↑ ""HT Assist": What is it, and how does it help?". Retrieved January 2, 2013.
  6. ↑ Merritt, Rick. "AMD tips quad-core performance". EETimes.com. Retrieved March 16, 2007.
  7. ↑ "AMD Opteron X2150 APU". Retrieved October 19, 2014.
  8. ↑ List of AMD Opteron microprocessors#Opteron 6300P-series "Warsaw" (32 nm)
  9. ↑ http://www.amd.com/en-us/products/server/opteron-a-series
  10. ↑ AMD’s first ARM-based processor, the Opteron A1100, is finally here, ExtremeTech, 2016-01-14, retrieved 2016-08-14
  11. ↑ "TOP500 List - June 2015". TOP500. Retrieved 2015-08-10.
  12. ↑ "AMD Opteron Processor Models x52 and x54 Production Notice" (PDF) (Press release). Advanced Micro Devices. April 2006. Retrieved November 30, 2006.
Wikimedia Commons has media related to AMD Opteron.
This article is issued from Wikipedia - version of the 8/14/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.