8-inch Mk. VI railway gun

8-inch MkVIM3A2 railway gun

8-inch MkVIM3A2 railway gun
Type Railway gun
Place of origin United States
Service history
In service 1941–1946
Used by United States
Wars World War II
Production history
Manufacturer Baldwin Locomotive Works (railway carriage)
Produced 1941
Number built 32? railway version, 16 fixed barbette mounts[1]
Specifications
Weight tube and breech: 42,000 lb (19,000 kg)
complete railway mount: 188,000 lb (85,000 kg)[1]
Length tube and breech: 30 ft 9 in (9.37 m)

Shell separate loading HE and AP,
260 pounds (120 kg) AP[2]
Caliber 8 inches (203 mm)
Breech Interrupted screw, step cut (Welin type)
Recoil Hydropneumatic
Carriage M1A1 railway
Elevation 45 degrees
Traverse 360 degrees
Rate of fire 2 rounds a minute
Muzzle velocity 2,750 ft/s (840 m/s) AP, or 2,840 ft/s (870 m/s) HE.
Maximum firing range 35,300 yd (32,300 m)[2]
Feed system hand

The 8-inch Navy gun MkVIM3A2 on railway mount M1A1 was a World War II improved replacement for the World War I-era 8-inch (203 mm) M1888 gun and was used by the US Army's Coast Artillery Corps in US harbor defenses. The guns were also mounted in fixed emplacements on the barbette carriage M1A1.[1] These guns were US Navy surplus 8"/45 caliber guns from battleships scrapped under the 1922 Washington Naval Treaty. Mark VI (also Mark 6) was the Navy designation. The Army designation for this gun was "8-inch Navy gun MkVIM3A2".[1]

History

The ex-Navy Mark VI railway gun was quickly put together at the start of World War II, to supplement the older World War I 8-inch M1888 railway gun. It was developed from an experimental 12-inch (305 mm) railway howitzer carriage of World War I.[3] The all-around rotating mount and outriggers were designed to allow the gun to track a moving target for coast defense. These guns had a very short life in Army use, entering service in February 1941 and being cut up for scrap immediately after the war. The guns were the Navy's 8-inch (203 mm)/45 caliber Mark VI, and were originally secondary armament on Virginia- and Connecticut-class battleships launched 1904-06 and scrapped in the 1920s.[4] They were mounted in both fixed emplacements and on the M1A1 railway carriage.[1]

Deployment

Sighting and fire control equipment

The following sighting equipment was used with the gun.

support cars

Surviving Examples

Four weapons of this type survive:[8]

See also

References

  1. 1 2 3 4 5 6 Berhow 2004, pp. 114-117.
  2. 1 2 Berhow 2004, p. 61.
  3. Lewis 1979, p. 109.
  4. "USA 8"/45 (20.3 cm) Mark 6". NavWeaps.com.
  5. Berhow 2004, p. 226.
  6. Lewis 1979, pp. 140-141.
  7. "FT 8-I-1 Firing tables". Gene Slovers US Navy Pages.
  8. Berhow 2004, p. 234
  9. "Railway Batteries". FortMiles.org.

External links

This article is issued from Wikipedia - version of the 11/28/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.