.280 Remington

.280 Remington
Type Rifle
Place of origin USA
Production history
Designer Remington
Designed 1957
Manufacturer Remington
Produced 1957-Present
Variants .280 Ackley Improved
Specifications
Parent case .30-06
Bullet diameter .284 in (7.2 mm)
Neck diameter .315 in (8.0 mm)
Shoulder diameter .441 in (11.2 mm)
Base diameter .470 in (11.9 mm)
Rim diameter .473 in (12.0 mm)
Case length 2.540 in (64.5 mm)
Overall length 3.330 in (84.6 mm)
Case capacity 67.9 gr H2O (4.40 cm3)
Rifling twist 1 in 10 in (250 mm)
Primer type Large rifle
Maximum pressure 60,000 psi (410 MPa)
Ballistic performance
Bullet mass/type Velocity Energy
120 gr (8 g) SP 3,112 ft/s (949 m/s) 2,581 ft·lbf (3,499 J)
140 gr (9 g) HP 2,839 ft/s (865 m/s) 2,506 ft·lbf (3,398 J)
154 gr (10 g) SP 2,825 ft/s (861 m/s) 2,730 ft·lbf (3,700 J)
168 gr (11 g) HPBT 2,723 ft/s (830 m/s) 2,767 ft·lbf (3,752 J)
175 gr (11 g) SP 2,681 ft/s (817 m/s) 2,794 ft·lbf (3,788 J)
Test barrel length: 24"
Source(s): Accurate Powder

The .280 Remington, also known as the 7mm Express Remington, was introduced in 1957 for the Remington model 740, 760, 721, and 725 rifles. The .280 is based on the .30-03 necked down to accept 7 mm (.284in) bullets, with the neck moved forward .050in (1.27mm). Original loadings were 125, 150 and 165 grain bullet weights.

History

Having been released 32 years after the .270 Winchester, it had somewhat unspectacular sales; Remington renamed the cartridge in 1979, calling it the 7 mm Express in an attempt to increase sales. This resulted in people confusing it with the 7 mm Remington Magnum and Remington two years later changed the name back to .280 in 1981.

.280 Remington vs .270 Winchester

The .280 Remington is capable of generating slightly higher velocities with a given bullet weight than the .270 Winchester, and also able to use heavier bullets due to the larger .284" diameter. .284" bullets also have higher ballistic coefficients at the top of the weight spectrum than .277" bullets. The greater energy and higher ballistic coefficient of heavier .284" bullets give the .280 Remington a slight ballistic advantage over the .270 Winchester.

.280 vs .30-06

The .280 Remington is capable of developing energy nearly equal to the .30-06 Springfield, but with lighter bullets having a better ballistic coefficient. The .30-06 produces more energy than the .280 with bullets heavier than 180 grains, though .284" 175 grain bullets have a high sectional density of .310, compared to the 30-06 180 grain bullet with a moderate sectional density of .271. The .280 is suitable for hunting any game in North America with good shot placement.

SAAMI pressure limit for the .280 Remington is set at 60,000 PSI, 50,000 CUP.

Most American rifle and ammunition manufacturers catalogue the .280 Remington.

In bolt action rifles the .280 Remington is not popular in Europe, where it competes with the 7×64mm, to which it is almost ballistically identical. But it does have a larger than expected number of European users in imported self-loading rifles such as those by Remington. When compared to the .280 Remington the 7x64mm has a slightly higher maximum allowed chamber pressure.

.280 Ackley Improved

.280 Ackley Improved on the right

One of P.O. Ackley's earliest wildcats was the 7mm-06 Improved, which was made by necking down the .30-06 Springfield case and fire-forming it to have less body taper and a 40-degree shoulder angle. Soon after the .280 Remington came out, Fred Huntington reformed its case to an improved configuration with minimum body taper, a 35-degree shoulder angle, and called it the .280 RCBS. Since cases for the .280 RCBS could be formed by firing .280 Remington ammo in a rifle chambered for the former, Ackley abandoned the 7mm-06 Improved and started chambering rifles for the .280 RCBS. He then changed the 35-degree shoulder to 40-degrees and the .280 Ackley Improved was born. If barrel length and chamber pressure are equal, the .280 Ackley Improved is about 100 fps faster with all bullet weights than the standard .280 Remington. In 2007, ammunition manufacturer Nosler registered the .280 Ackley Improved with SAAMI and began providing factory loaded ammunition and rifles for it.

See also

References

    This article is issued from Wikipedia - version of the 11/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.