480i

SDTV resolution by nation; countries using 480i are in green.

480i is a shorthand name for the video mode used for standard-definition analog or digital television in most of the Americas (with the exception of Argentina, Paraguay and Uruguay), Caribbean, Myanmar, Japan, South Korea, Taiwan and Philippines. The 480 identifies a vertical resolution of 480 lines, and the i identifies it as an interlaced resolution. The field rate, which is 60 Hz (or 59.94 Hz when used with NTSC colour), is sometimes included when identifying the video mode, i.e. 480i60; another notation, endorsed by both the International Telecommunication Union in BT.601 and SMPTE in SMPTE 259M, includes the frame rate, as in 480i/30. The other common standard, used in the rest of the world, is 576i.

In analogue contexts, this resolution is often called "525 lines". It is mandated by CCIR Systems M and J, which are usually paired with NTSC colour - which led to the "NTSC" name being often inaccurately used to refer to this video mode. Other colour encodings have also been used with System M, notably PAL-M in Brazil.

Technical detail

For analog NTSC there are a total of 525 scanning lines of which originally 483 lines were visible (241.5 visible lines + 21 lines of vertical blanking per field) and later 480 (240 complete lines per field). [For quad video recording systems, the math suggests 15 transverse head passes, each consisting of 16 lines of video, are required to complete one field.] A full frame consists of two fields. One field contains the odd-numbered lines and the other contains the even ones. By convention an NTSC video frame is considered to start with an even field followed by an odd field. The disparity of the line numbering compared to other systems is solved by defining the line numbering to start five equalizing pulses (or 2 and a half lines) earlier than on all other systems (including Systems A and E even though they had no equalizing pulses) on the first equalizing pulse following an active line or half line. This has the effect of placing a half line of video at the end of the even (first) field and the beginning of the odd (second field). Thus the line numbers correspond to the real lines of the video frame. On all other systems, the field was considered to start with the falling edge of the first field pulse which gave the confusing position that the odd field (first) had a half a line of video occupying the latter half of a whole line and ended with a whole line of video but half a scanning line (and vice versa for the even field). The NTSC convention solved this confusion.[1]

For DV-NTSC only 480 lines are used. The digitally transmitted horizontal resolution is usually 720 samples (which includes 16 samples for the horizontal sync and horizontal blanking) or 704 visible pixels with an aspect ratio of 4:3 (with vertically rectangular pixels) and therefore a display resolution of 640 × 480 (VGA); that is standard-definition television (SDTV) with a 4:3 aspect ratio (with square pixels).[2][3][4][5]

The field rate (not the frame rate) is usually (60/1.001) = 59.94 Hertz for color TV and can be rounded up to 60 Hz. There are several conventions for written shorthands for the combination of resolution and rate: 480i60, 480i/30 (EBU/SMPTE always use frame rate to specify interlaced formats) and 480/60i. 480i is usually used in countries that conventionally use NTSC (most of the Americas and Japan), because the 525 transmitted lines at 60 hertz of analogue NTSC contain 480 visible ones.

480i can be transported by all major digital television formats, ATSC, DVB and ISDB, and on DVD.

See also

References

  1. Report 308-2 of the XIIth Planiary of the CCIR - Characteristics of TV systems.
  2. "rpsoft 2000 software". rpsoft2000.com. Retrieved 1 June 2015.
  3. "480i". afterdawn.com. Retrieved 1 June 2015.
  4. Glossary - 480i
  5. "480i" via The Free Dictionary.
This article is issued from Wikipedia - version of the 11/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.